Rogue Barbell Club

[mrcheeze36]

Monster lite slinger with weight stack are available for order, 14-30 wait times. I have never seen one posted online, these may be the first ones to ship.

One thing to note from the description is that it’s designed for 90” ML racks and may not work with the taller versions.

[Sdca7718]

One thing to note from the description is that it’s designed for 90” ML racks and may not work with the taller versions.

The standard rack is 90”, I don’t think most people have the taller racks. It is the shorter rack that may be a problem for those that cut their rack down to fit low ceilings. I’m wondering for the fit on the flat foot rack also.

Someone needs to do a review on one and provide measurements.

[DarthCholo]

The standard rack is 90”, I don’t think most people have the taller racks. It is the shorter rack that may be a problem for those that cut their rack down to fit low ceilings. I’m wondering for the fit on the flat foot rack also.

Someone needs to do a review on one and provide measurements.

I find it hard to believe this all couldn't be solved by selling or customizing the cable length to accommodate racks of different heights and depths.

[mrcheeze36]

I find it hard to believe this all couldn't be solved by selling or customizing the cable length to accommodate racks of different heights and depths.

Aside from a longer cable, the guide rods would have to be longer...so they’d have to offer different length guide rods, or some kind of spacer between the guide rods and the top crossmember to make up for the extra height.

[Deep-Voiced-One]

The Coop review was pretty good actually..

Ok, the 45's are the same as the Arnolds.. Come on Rogue. Cast in the Arnold. We are not asking for machined. You will sell a sh-- ton of them.... Pay the royalties or whatever. Just do it..

You are selling the DD 45's for 310/pair. A pair of limited edition cast Arnolds could easily get twice that..

I just got to watching it in full and agree it was a legit Coop review. I still say that they should sell two versions, the ones they have now and a limited edition golden era set with: Arnold, Franco, Zane, Draper, etc...for a premium on the latter ones of course.

[Greybird2]

I just got to watching it in full and agree it was a legit Coop review. I still say that they should sell two versions, the ones they have now and a limited edition golden era set with: Arnold, Franco, Zane, Draper, etc...for a premium on the latter ones of course.

They would sell like crazy.

[DarthCholo]

Aside from a longer cable, the guide rods would have to be longer...so they’d have to offer different length guide rods, or some kind of spacer between the guide rods and the top crossmember to make up for the extra height.

Very true without looking at the apparatus I totally missed that. I was visualizing something similar to the plate loaded one I've seen before.

[POTA]

The Coop review was pretty good actually..

Ok, the 45's are the same as the Arnolds.. Come on Rogue. Cast in the Arnold. We are not asking for machined. You will sell a sh-- ton of them.... Pay the royalties or whatever. Just do it..

You are selling the DD 45's for 310/pair. A pair of limited edition cast Arnolds could easily get twice that..

It's $155 for a pair. But I would pay $310 for a pair if they did cast iron versions of the Arnolds.

[urbanlifter]

The Coop review was pretty good actually..

Agree, finally watched the review and the 100/45lb plates look pretty darn good. Not enough to make me sell my REP plates, but I'm still interested in grabbing a pair of hundos when they allow pickup. The 35/25's look ugly to me though, wouldn't make these my daily drivers.

[MGM711]

Agree, finally watched the review and the 100/45lb plates look pretty darn good. Not enough to make me sell my REP plates, but I'm still interested in grabbing a pair of hundos when they allow pickup. The 35/25's look ugly to me though, wouldn't make these my daily drivers.

I can't see why anyone would buy any other plates besides the 100s and 45s. Depending on the shipping costs, I wouldn't mind buying a set of hundos and a couple pairs of 45s for my Reverse HYper down the road.

[HeavyIron8]

Anyone with the Rhino belt squat know if it is possible to belt squat without having to hold onto the handles? Or will the handles fall back and prevent the weights from moving down?

[IronAbrams]

Anyone with the Rhino belt squat know if it is possible to belt squat without having to hold onto the handles? Or will the handles fall back and prevent the weights from moving down?

They will usually stay put but may occasionally drift forward. You could probably shave off some of the rubber bumpers or add some weight to the handles to keep it more consistent.

[Asjogren]

They will usually stay put but may occasionally drift forward. You could probably shave off some of the rubber bumpers or add some weight to the handles to keep it more consistent.

I’ve got one on order for 6 weeks and the waiting is killing me....I would think some sort of magnets could work for keeping the handles in place

[HeavyIron8]

I’ve got one on order for 6 weeks and the waiting is killing me....I would think some sort of magnets could work for keeping the handles in place

Not a bad idea at all. I wonder how strong of a magnet would be ideal

[DamonB82]

I need someone to come up with the knock off of the AH-1 ARTICULATING HANDLE KIT....... I can use Rep utility pins for the weight horns, so I either need rogue to sell just the handles at a less than rape price... or I need Titan to step on up
Can't justify soberly paying over $500 for demshiznits after tax and shipping.

[Asjogren]

Not a bad idea at all. I wonder how strong of a magnet would be ideal

I bet the magnets don’t need to be that strong. Home Depot sells a few different sizes that should work. Until mine arrives I don’t know what the gap is between the movable uprights and the stationary uprights when the handles are brought forward.

I’ll post update when I get mine.

[HeavyIron8]

I bet the magnets don’t need to be that strong. Home Depot sells a few different sizes that should work. Until mine arrives I don’t know what the gap is between the movable uprights and the stationary uprights when the handles are brought forward.

I’ll post update when I get mine.

I placed my order on the 24th of October, and they said mine only has one last piece in production. I bet we’re in the same batch. Hopefully ours ship at the same times

[Asjogren]

I placed my order on the 24th of October, and they said mine only has one last piece in production. I bet we’re in the same batch. Hopefully ours ship at the same times

Ordered mine Sept 21st....just got email with ESTIMATED ship date of December 2nd..pretty crappy as was listed as “in Stock”( I signed up for email Notification to tell me when it was back in stock). It is what it is. I’m in Massachusetts so I don’t know if that’s an issue..maybe you will get yours first

[Heisman2]

I ordered the adjustable monolift arms 1 month ago and they were supposed to ship in 14-30 days; it's just over 30 days now and they still haven't been picked when I click on the link for the order update. I'm guessing they are behind on a lot of things.

[C123C]

I ordered the adjustable monolift arms 1 month ago and they were supposed to ship in 14-30 days; it's just over 30 days now and they still haven't been picked when I click on the link for the order update. I'm guessing they are behind on a lot of things.

Buddy has been waiting on ML safeties for his half rack since he ordered just as the Covid shutdown was happening (so sometime in mid-March). I think they are getting essentials out as fast as possible and accessories are as able (monos and separate safeties anyway though that's kind of essential on squat stands and half racks).

[mrcheeze36]

I need someone to come up with the knock off of the AH-1 ARTICULATING HANDLE KIT....... I can use Rep utility pins for the weight horns, so I either need rogue to sell just the handles at a less than rape price... or I need Titan to step on up
Can't justify soberly paying over $500 for demshiznits after tax and shipping.

I was looking to get the RM-3W quick attach pull-up bar from the Monster folding rack as an alternative, and use weight horns or Rep utility pins for loading plates, however customer service said they don’t have an ETA when it would be available/in stock.

[thejosef]

Agree, finally watched the review and the 100/45lb plates look pretty darn good. Not enough to make me sell my REP plates, but I'm still interested in grabbing a pair of hundos when they allow pickup. The 35/25's look ugly to me though, wouldn't make these my daily drivers.

Yeah I'm really tempted to pick up a bunch of the 45s. I dig the look. The 35s and 25s are kinda weird. No thanks on the 100s. Lol. They look cool, but I ain't moving those beasts around in my tiny home gym.

[Asjogren]

I placed my order on the 24th of October, and they said mine only has one last piece in production. I bet we’re in the same batch. Hopefully ours ship at the same times

I got an email yesterday that my Rhino has shipped. Yea!. Odd that I got an email a couple days earlier that it would ship on December 2nd.

[HeavyIron8]

I got an email yesterday that my Rhino has shipped. Yea!. Odd that I got an email a couple days earlier that it would ship on December 2nd.

Guess we weren't in the same batch. Looks like I still got a long wait ahead :sadface:.

[Asjogren]

Guess we weren't in the same batch. Looks like I still got a long wait ahead :sadface:.

Finally gets here in the pouring rain..had to carry down into my basement..but it’s here !

[Asjogren]

Finally gets here in the pouring rain..had to carry down into my basement..but it’s here !

All assembled . Took a while as I had to use the Rogue supplied wrenches. I should note that Rogue did an excellent packaging job as it’s all in one box with compartments. Not a scratch on it.



The thing is a beast. Well designed with a good foot print and I should point out that I’ve never been a Rogue fan. Tried it out a bit (never belt squated before) and this thing is cool.

Note if you get one,stop by Home Depot and grab (4) 1/4 x20 x3/4” long stainless machine screws. The ones Rogue sends just barely catch the threads so it’s an easy fix ( trust me on this and will save time assembling getting them beforehand)

[POTA]

All assembled . Took a while as I had to use the Rogue supplied wrenches. I should note that Rogue did an excellent packaging job as it’s all in one box with compartments. Not a scratch on it.

Badass! How much did it cost all in (including shipping)?

[Asjogren]

Badass! How much did it cost all in (including shipping)?

Just under $2000 with shipping. Very nice machine and well designed. Only thing is loading plates so need some space behind it. Depends how much room you have and I’m tight for space so one side is tougher than the other to load plates.

[C123C]

All assembled . Took a while as I had to use the Rogue supplied wrenches. I should note that Rogue did an excellent packaging job as it’s all in one box with compartments. Not a scratch on it.



The thing is a beast. Well designed with a good foot print and I should point out that I’ve never been a Rogue fan. Tried it out a bit (never belt squated before) and this thing is cool.

Note if you get one,stop by Home Depot and grab (4) 1/4 x20 x3/4” long stainless machine screws. The ones Rogue sends just barely catch the threads so it’s an easy fix ( trust me on this and will save time assembling getting them beforehand)

Very nice. Was going to pick this up before I grabbed Mech's leverage version - stowed in the back of my rack which saves me the room to eventually add a functional trainer (so rather than save me money, it cost me more by saving space!).

Belt squat is really nice. Great assistance exercise especially when it comes to adding squat volume without beating the hell out of you or taking a Herculean effort. I'll often throw this in after deads when I'd normally not be inclined to back squat or do anything involving a bar loaded on me.

[grumpytude]

[QUOTE=Asjogren;1622764111]Finally gets here in the pouring rain..had to carry down into my basement..but it’s here !

congrats- thats a sweet looking piece of equipment. Looking forward to your impression onit- although I'm sure you'll love it....