The Official Craigslist Thread (Round 3)

[Anthony21]

guy probably has buyer's remorse and is trying to break even. i feel bad, but i wouldn't pay near that price for used plates unless they're rare

Huy wants $150 for a pair of 45's...gtfo lol

[Anthony21]

EFTS GHR

https://phoenix.craigslist.org/nph/s...225818030.html

[indianbuckeye]

What brand leg press is this? it has a 400lb stack. what would be a good price?

[NHAngler]

Huy wants $150 for a pair of 45's...gtfo lol

Jet.com has them for $86 each new / -15% off = $73. Price goes down if you buy more. Last week they had 25% off getting the 45lb down to 64 bucks each. So I think a good fair price would be capped at about 120/125. ...if these are in new condition.

People can ask whatever they want but it does pain me when they don't do their homework first or are a flipper hoping to take advantage of someone's lack of knowledge shopping for these. I do know that from many sources there is a general trend to buy your weights from CL to save money and get slightly better stuff.

Now, there is always the factor of making an offer and may be the sellers intent behind the price as a starting point.

[NHAngler]

If these are still for sale I would be shocked. I live nowhere near there but did get in my truck just now and teared up a little thinking how great it would be to get this deal. It is only a 20 hour drive each way but think that I could take the family there for an impromptu vacation trip? ha ha. Wife would kill me but the story would hopefully live on through internet forum scrolls like the legend of a spartan warrior's tales? OK, maybe not but if I stop posting for a while, I would like to request that someone sends an investigator to check on me / printing this post out as an article of evidence. ha ha.

Good luck if you are in this area and can move on these. Even if you hate Ivanko you should buy these. Even if you don't lift weights, you should buy these. Even if you are only 19 hours away (20 hours = too far) you should buy these.

https://eauclaire.craigslist.org/spo...225217252.html

[EHC1228]

fayetteville.craigslist.org/spo/d/rogue-squat-stand/6235166463.html

Seller's description makes it sound like a "Like New" condition. Grabbing it plus the 390F conversion kit would make a nice discount

[Anthony21]

Cybex commercial adjustable bench for $150

https://phoenix.craigslist.org/nph/s...235437850.html

[Mechanon84]

If these are still for sale I would be shocked. I live nowhere near there but did get in my truck just now and teared up a little thinking how great it would be to get this deal. It is only a 20 hour drive each way but think that I could take the family there for an impromptu vacation trip? ha ha. Wife would kill me but the story would hopefully live on through internet forum scrolls like the legend of a spartan warrior's tales? OK, maybe not but if I stop posting for a while, I would like to request that someone sends an investigator to check on me / printing this post out as an article of evidence. ha ha.

Good luck if you are in this area and can move on these. Even if you hate Ivanko you should buy these. Even if you don't lift weights, you should buy these. Even if you are only 19 hours away (20 hours = too far) you should buy these.

https://eauclaire.craigslist.org/spo...225217252.html

Calm down guy, you're talking about 90 lbs of cast iron, used, for half off retail...

[Domicron]

Cybex commercial adjustable bench for $150

https://phoenix.craigslist.org/nph/s...235437850.html

damn looks to be in great shape too...

Calm down guy, you're talking about 90 lbs of cast iron, used, for half off retail...

rite? should be in the dreamer thread...used cast iron is $.50/pound

if i were in the area, i might pay $.55, but i'd be doing the guy a favor...

[GamecockLifter]

damn looks to be in great shape too...



rite? should be in the dreamer thread...used cast iron is $.50/pound

if i were in the area, i might pay $.55, but i'd be doing the guy a favor...

Hahaha

[murphyreedus]

rite? should be in the dreamer thread...used cast iron is $.50/pound

if i were in the area, i might pay $.55, but i'd be doing the guy a favor...

I heard from a good source that the seller is a jerk who never calls his mom and leaves the water running when he brushes his teeth.

[Anthony21]

damn looks to be in great shape too...



rite? should be in the dreamer thread...used cast iron is $.50/pound

if i were in the area, i might pay $.55, but i'd be doing the guy a favor...

Yeah the bench looks in great shape. I'm f'n tempted to pick it up even though I just got a new Rep Fitness adjustable bench lol.

[Domicron]

Yeah the bench looks in great shape. I'm f'n tempted to pick it up even though I just got a new Rep Fitness adjustable bench lol.

if you don't own a commercial bench, go ****ing buy it now you fool.

the REP bench is great, and you may even prefer the wide pad of the rep bench to the cybex for benching, but i would be VERY tempted to buy that cybex if it were in my area and i have no justification to buy it.

[Mechanon84]

the REP bench is great

The REP bench is okay. The Cybex is great.

[Domicron]

The REP bench is okay. The Cybex is great.

true

[Hallowedlunch]

I heard from a good source that the seller is a jerk who never calls his mom and leaves the water running when he brushes his teeth.

LOL, I thought those were yours. That York bar tho..

[c00nc4t]

if you don't own a commercial bench, go ****ing buy it now you fool.

the REP bench is great, and you may even prefer the wide pad of the rep bench to the cybex for benching, but i would be VERY tempted to buy that cybex if it were in my area and i have no justification to buy it.

Seriously, I'm tempted to buy that bench and I already have a 5435!

[NHAngler]

Calm down guy, you're talking about 90 lbs of cast iron, used, for half off retail...

More than half off if you are local to the seller and can pick up. Also, quite rare in my area to see these for sale let alone more than half off what you can buy new ones shipped. Since I am looking to add 45's (and who isn't?) this was a tease to me as it was out of reach.

Overall was just trying to have fun with it and more importantly share the potential good deal for others that may be near the seller.

My humor was either not detected or just not appreciated... Either way, sorry if this offended anyone...

Domicron, you can't get used rusted CAP plates in my area for 50 cents a pound but envy you and others that can wherever you are located if you could ever get anything more close to that. There are at least two flippers in the area that seem to regulate the price of iron. So not sure how that is going to fly with a pair of sought after revolvers. I am not pounding CL anymore but rather setup an automated daily search for newer revolvers and that popped up.

[Domicron]

More than half off if you are local to the seller and can pick up. Also, quite rare in my area to see these for sale let alone more than half off what you can buy new ones shipped. Since I am looking to add 45's (and who isn't?) this was a tease to me as it was out of reach.

Overall was just trying to have fun with it and more importantly share the potential good deal for others that may be near the seller.

My humor was either not detected or just not appreciated... Either way, sorry if this offended anyone...

Domicron, you can't get used rusted CAP plates in my area for 50 cents a pound but envy you and others that can wherever you are located if you could ever get anything more close to that. There are at least two flippers in the area that seem to regulate the price of iron. So not sure how that is going to fly with a pair of sought after revolvers. I am not pounding CL anymore but rather setup an automated daily search for newer revolvers and that popped up.

We were being sarcastic

[Anthony21]

if you don't own a commercial bench, go ****ing buy it now you fool.

the REP bench is great, and you may even prefer the wide pad of the rep bench to the cybex for benching, but i would be VERY tempted to buy that cybex if it were in my area and i have no justification to buy it.

Picked it up today

[dskoo65]

Picked it up today

Da*n....been looking for one of those for a year in the Chicago market. When they show up its a "flipper/retailer" and always want $500+.

[Domicron]

Picked it up today

[img]http://i.imgur.com/CFQZOca.png[img]

[img]http://i.imgur.com/zRjxKSA.png[img]

very nice

what are the plans for the REP bench now

[Anthony21]

Da*n....been looking for one of those for a year in the Chicago market. When they show up its a "flipper/retailer" and always want $500+.

Guy had it for $150. He said he had 20 other people wanting it so I was lucky to message him first when it was posted.

[Anthony21]

very nice

what are the plans for the REP bench now

I'm still going to use it since I like the wider pad and just keep both in rotation

[Anthony21]

What would you guys pay per lb for these Troy 45lb plates?

[Domicron]

What would you guys pay per lb for these Troy 45lb plates?

dumbbell buddy has a 500# set for just under $1.5/# shipped. i think the "start at half price for used" applies here

[Anthony21]

dumbbell buddy has a 500# set for just under $1.5/# shipped. i think the "start at half price for used" applies here

So personally what would you offer?

[chadsalt]

So personally what would you offer?

I'm just a dumb redneck, but I'm pretty sure he indicated .75 cents lbs.

I agree with his assessment.

[Anthony21]

I'm just a dumb redneck, but I'm pretty sure he indicated .75 cents lbs.

I agree with his assessment.

I figured that but thought It would be too low lol. Eh screw it I'll offer him that and see if he bites lol.

[Domicron]

I figured that but thought It would be too low lol. Eh screw it I'll offer him that and see if he bites lol.

show up with cash and see what he says. it's easy to say no low offers over text/email.

ideally you should show up with the max you're willing to pay in your pocket and then haggle your way down.