I have never used a smith machine until this week. And to be honest I absolutely loved it. I did rows, upright rows, and shoulder press this week all on a smith machine. Now I know that it definitely knocks off alot of weight with the guide rails but I felt that it help me be more focused and symmetrical on my lifts. My question is if it is alright to depend on smith machines for some primary exercises such as shoulder press, squats, and bench...I also plan to do dozens of other free weight and cable exercises. I am not trying to rely solely on the smith. Whats your guys take on smith machines? Is there something I am missing because so far it seems to be a real help.......thanks in advance
http://www.fithacker.com/images/smith.jpg
|
-
10-14-2009, 12:24 PM #1
Smith Machines, pros and cons...?
-
10-14-2009, 12:37 PM #2
- Join Date: May 2006
- Location: Cincinnati, Ohio, United States
- Age: 40
- Posts: 3,749
- Rep Power: 0
Pros - don't need a spotter.
Cons - unnatural range of motion (bi-direction smith machines are a little better at this), little use of stabilizers.
Also, it doesn't help you become more symmetrical - it does the exact opposite. If you're lopsided when bench pressing with a barbell, guess what? You have to compensate for the lower arm and finish out the rep. When you're benching on a smith and one arm is weaker, the other one just finishes it up since the bar doesn't move to one side or the other.
Smith machine is good for some things, but not as a main source of weight training. If you use it as a primary source, you'll develop imbalances which could lead to performance problems and injury when you try to lift similar weights without the help of rails.
-
10-14-2009, 12:48 PM #3
- Join Date: Mar 2007
- Location: Kings Park, New York, United States
- Age: 44
- Posts: 3,113
- Rep Power: 4494
The smith is great. The only place where Id be careful about the smith's use is where it affects the natural movement of the lift. For instance, benching and squats with a barbell will not move in a perfect straight line, however the smith will lock you into the straight line of movement. At best it will compromise your lift by not being in proper position. At worst it becomes dangerous and can cause injury, ie. rounding of the back. As long as youre aware of these downsides, and you do not put yourself in danger, the smith is a great tool. I wouldnt hesitate to use it for those lifts you mentioned. Actually, more often than not im forced to use the smith due to a lack of spotter. Have at it.
1305 combined total in the Big Three @ 225 bodyweight
B: 385 / S: 425 / D: 495
Of Beers and Burger King: http://forum.bodybuilding.com/showthread.php?t=110649771
-
10-14-2009, 12:48 PM #4
-
-
10-14-2009, 12:53 PM #5
I never have a spot for bench, and you can only go so far without a spotter when trying to increase your strength. I havent actually tried the smith for bench yet, but I think I will next week. I think I may try a few weeks with it, then switch back to barbell/dumbbell and see where I am at. I suppose I could go from there. I dont know, like I was saying above, I just feel that it really hit the muscles I was trying to hit when I used it...
-
10-14-2009, 12:58 PM #6
- Join Date: Mar 2007
- Location: Kings Park, New York, United States
- Age: 44
- Posts: 3,113
- Rep Power: 4494
If youre gonna try bench on the smith, ive found a couple things help. Flat bench with flared out elbows really feels quite awkward, and may even be a contributing factor to my nagging R/C soreness. I woudl suggest keeping teh elbows tucked, using a powerlifter style stance for flat bench. Even though you wont make use of the J curve that power lifters do, its still feels much more comfortable to have the bar a little lower down the abdomen rather than at nipple height. Also, incline bench seems to be much easier on teh shoulders when using the smith machine, even if you prefer a wider grip and flared elbows.
1305 combined total in the Big Three @ 225 bodyweight
B: 385 / S: 425 / D: 495
Of Beers and Burger King: http://forum.bodybuilding.com/showthread.php?t=110649771
-
10-14-2009, 02:04 PM #7
I generally only use the Smith machine for two things: Seated Shoulder Press & Shrugs (when all the barbells are being used).
I never have a spotter like most people, so I feel it's safer to throw on the weight within the Smith Machine.
Furthermore, our two areas for Seated BB Press are awkward. The bar is either way in front of you or the bar is way behind your head, which in turn, forces you to need a spotter to get the lift off for you (probably just me). I would adjust the position of the seat, but it's combined with the rack.
Looks almost like this, but more space:
http://www.fitnessscape.com/Merchant...er-press-m.jpg"Fork downs and plates pushes."
-Theapexxxx
++ Positive Crew ++
-
10-15-2009, 12:46 PM #8
-
-
10-15-2009, 12:52 PM #9
-
10-15-2009, 02:36 PM #10
-
10-15-2009, 02:42 PM #11
-
10-15-2009, 02:43 PM #12
i read about a study on this a few days ago...people that use a smith is weaker than ones that do not simply because of the range of motion that you get when you are free bb pressing. the smith limits your range of motion and does not attack as many angles as free pressing. also it created the illusion for noobs that you are stronger but the smith bar usually only weighs about 15lbs rather than 45 like free bb
i use the smith for bench throws just because it would land on my face otherwise. i also use it for standing calves
ill bench on it when my rc is bothering me as well
-
-
10-15-2009, 04:22 PM #13
-
10-15-2009, 06:08 PM #14
-
10-15-2009, 07:04 PM #15
-
10-15-2009, 07:13 PM #16
-
-
10-15-2009, 07:15 PM #17
-
10-15-2009, 07:25 PM #18
-
10-15-2009, 07:31 PM #19
-
10-15-2009, 08:04 PM #20
-
-
10-15-2009, 08:22 PM #21
- Join Date: Jan 2004
- Location: New York, New York, United States
- Age: 58
- Posts: 3,707
- Rep Power: 3130
I owe the bulk of my pec development to 30-degree incline Smiths. Nothing else blew mine up like the Smith, and I'd already been working out for years...
I occasionally use it for shrugs (although I don't perform shrugs often), and sometime for delt presses (though I prefer the Hammer Strength), but I wouldn't write off the Smith as some guys do.
If it works for you, use it. If it doesn't, don't. If you're not sure, try it for a while, then make an educated decision.Keep on hulkin'.
I won't quit till no shirt will fit.
-
10-15-2009, 09:21 PM #22
-
10-15-2009, 09:34 PM #23
-
10-15-2009, 10:46 PM #24
-
-
10-16-2009, 12:20 AM #25
-
10-21-2009, 07:25 AM #26
Well I went ahead and did my primary exercises on the smith this week. For instance on my chest day I did flat and incline bench, shoulders I did press and shrugs, and for back I did rows. I didnt do legs this week due to extreme soreness from flag football lol. But anyways, I feel like I got some of the best workouts this year using the smith. I obviously did other workouts outside the smith, but I just don't see why more people dont use it, atleast here and there....
-
10-21-2009, 08:28 AM #27
-
10-21-2009, 09:39 AM #28
-
-
10-21-2009, 07:12 PM #29
- Join Date: Jan 2004
- Location: New York, New York, United States
- Age: 58
- Posts: 3,707
- Rep Power: 3130
Sorry for the delayed response, Ant. Right below the collarbone. I make sure to keep a really good arch in the sternum as well and keep tension on my pecs throughout the move. Full stretch on the pecs at the bottom, but I stop before I feel the tension move to my delts. Likewise I raise up until I feel the weight starts to shift, stopping a couple inches before locking elbows. The pump is pretty insane when it stays in the zone.
Keep on hulkin'.
I won't quit till no shirt will fit.
-
10-21-2009, 07:44 PM #30
Similar Threads
-
Smith Machine - Pros and Cons
By szstevo in forum ExercisesReplies: 14Last Post: 04-08-2009, 08:12 AM -
Pros and cons of smith machine
By Coty08 in forum Teen BodybuildingReplies: 16Last Post: 04-07-2009, 07:29 PM -
A power rack VS a Smith m/c (pros and cons)
By tonylikeBody-B in forum Workout EquipmentReplies: 25Last Post: 04-01-2009, 12:15 PM -
Pros and cons of high set numbers?
By Jack-MA in forum Teen BodybuildingReplies: 6Last Post: 10-25-2002, 10:37 PM
Bookmarks