Misc Firearms Crew XL: The XL is not a Roman numeral, know what we're sayin?

[jarryd2018]

I know I asked this morning but who has beard trimmer recommendations? I want something durable and easy to adjust.

[GingerBrah84]

You had a vagina too? Neat

I can confirm, we scissored.

[DolphinPenis]

Chime. Do any of you gays have experience with High Speed Gear products?

[Sp3cialK]

Chime. Do any of you ***s have experience with High Speed Gear products?

Ya. Wut?

[abandonedship]

Chime. Do any of you gays have experience with High Speed Gear products?

HSGI is good to go.

[CdtCox]

$100 for the kit (boss ordered the wrong kit for his)
$120 Monroe Load Levelers
$0 labor, because my techs hooked it up. Took two guys 45 minutes with air.

Why did you get rid of it?

The WK is somewhat of a compromise between the two Jeeps I'm looking at(XJ and JKU). Used ones are considerably cheaper than JKU's and seem inexpensive to lift.

[DolphinPenis]

Im looking at the hsgi battle belt / maybe plate carrier too.

[Sp3cialK]

Why did you get rid of it?

The WK is somewhat of a compromise between the two Jeeps I'm looking at(XJ and JKU). Used ones are considerably cheaper than JKU's and seem inexpensive to lift.

WJ is what you want if you are going to offroad much. I sold it because I was getting 13mpg and started a new job with a commute. The fit gets 34mpg, so that's the route I needed to go. My monthly gas bill on the WK was more than my car payment.

I'll likely get another when I move closer.

[Sp3cialK]

Im looking at the hsgi battle belt / maybe plate carrier too.

Do it.

[CdtCox]

WJ is what you want if you are going to offroad much. I sold it because I was getting 13mpg and started a new job with a commute. The fit gets 34mpg, so that's the route I needed to go. My monthly gas bill on the WK was more than my car payment.

I'll likely get another when I move closer.

WJ's have too many miles around where I'm looking. Fuk. 13mpg? On 32's?

I wouldn't be able to wheel a WK as much as I would a built XJ or JKU but with some meaty tires I could get around and get a little dirty.

[Sp3cialK]

WJ's have too many miles around where I'm looking. Fuk. 13mpg? On 32's?

Yep. Dat chitty V6.

Apart from that, it never gave me any trouble. Had every option, great vehicle for everything I did.


You can definitely get dirty too.

[jarryd2018]

I only get about 11 mpg in town or maybe less. I don't even drive every day though. My buddy is trying to get me to swap in a 12v cummins and get good mileage and make some real torque.

[RThoe]

Im looking at the hsgi battle belt / maybe plate carrier too.

If you're just interested in a chest rig (or even if you are interested in running a chest rig over a PC), contact Mauser88. He has this HSGI rig for sale.



http://www.highspeedgear.com/hsgi/do...bo-98DTC0.html

[MoeBettuh]

its not that bad, i had one

In TX? If so, your opinion is invalid.

I know I asked this morning but who has beard trimmer recommendations? I want something durable and easy to adjust.

I roll w/ a Wahl that was probably $25 at WalMart. I have two now because one that I thought I had lost was just misplaced in the house somewhere. One is 10 years old, one is ~6 years old. Both work like new.

[MoeBettuh]

I only get about 11 mpg in town or maybe less. I don't even drive every day though. My buddy is trying to get me to swap in a 12v cummins and get good mileage and make some real torque.

Tuna and bread.

[jarryd2018]

In TX? If so, your opinion is invalid.



I roll w/ a Wahl that was probably $25 at WalMart. I have two now because one that I thought I had lost was just misplaced in the house somewhere. One is 10 years old, one is ~6 years old. Both work like new.

My norelco lasted 10 years and only the clip that adjusts length broke. I'm sure most any would treat me well, I'm putting too much thought into it.

[jarryd2018]

Tuna and bread.

Is that in reference to me needing a bcm upper?

[CdtCox]

Turn this:http://www.autotrader.com/cars-for-s...86284793&Log=0




into this?

Wheels: Wrangler Take-Offs
Tires: 255/70/17 Goodyear Wrangler SR-A
Lift: 2" Rough Country
Spacers: None
Notes: No pinch weld but there is rubbing at full lock

[Sp3cialK]

Turn this:[url]http://www.autotrader.com/cars-for-sale/vehicledetails.xhtml?zip=27607&endYear=2010&modelC ode1=JEEPGRAND&showcaseOwnerId=100027116&startYear =1981&makeCode1=JEEP&searchRadius=100&showcaseList ingId=385271379&mmt=%5BJEEP%5BJEEPGRAND%5B%5D%5D%5 B%5D%5D&listingId=386284793&Log=0[/ur

[img]http://images.autotrader.com/scaler/544/408/hn/f44f3c240c914e90bdc2476c2cf85d13.jpg[/
[img]http://images.autotrader.com/scaler/544/408/hn/47cb27e6364a4b5c96cf2c6a4cb9f322.jpg[/

into this?

Yep. Rough country was the lift I had. Find some Rubicon take-offs.

On stock wheels, you'll need Spidertrax spacers. 265/70R17's are the teets.

[OfficerJimLahey]

[jarryd2018]

Yep. Rough country was the lift I had. Find some Rubicon take-offs.

On stock wheels, you'll need Spidertrax spacers. 265/70R17's are the teets.

I like the rough country lift on my truck.

[MoeBettuh]

Is that in reference to me needing a bcm upper?

It is. A nice truck seems to be low on ur list even if u want it to be high on ur list. U live close enough to walk for now and in those circumstances a super high quality rifle would take precedence for me. Ymmv.

[CdtCox]

Yep. Rough country was the lift I had. Find some Rubicon take-offs.

On stock wheels, you'll need Spidertrax spacers. 265/70R17's are the teets.

I want these AEV pintlers but I'm npt sure how they'll fit. I think I read something about them not fitting around the calipers.

[iTrek]

I want these AEV pintlers but I'm npt sure how they'll fit. I think I read something about them not fitting around the calipers.

Glad I'm not a car nut. I would be in some serious debt if I had to support a gun addiction and a car addiction. Looking to get a new motorcycle next year though. Good night sweet bank account.

[GingerBrah84]

Glad I'm not a car nut. I would be in some serious debt if I had to support a gun addiction and a car addiction. Looking to get a new motorcycle next year though. Good night sweet bank account.

That is the one nice thing about the Jeep. I have zero desire to do anything to it.

[MoeBettuh]

Speaking of goodnight bank acct, we started having the lets look into adopting talk tonight..

[RThoe]

Lose my chit every time I see that fat slug roll off

[Sp3cialK]

I want these AEV pintlers but I'm npt sure how they'll fit. I think I read something about them not fitting around the calipers.
[img]http://www.aev-conversions.com/shop/media/catalog/product/cache/1/thumbnail/630x404/9df78eab33525d08d6e5fb8d27136e95/p/i/pint_argent_tbl_2.jpg[/g]

Wut?




This jeep is likely on the OME lift. That's what I'll do the next time around.

[iTrek]

Speaking of goodnight bank acct, we started having the lets look into adopting talk tonight..

**** just got real. I was under the impression that you already had some kids?

[jarryd2018]

Glad I'm not a car nut. I would be in some serious debt if I had to support a gun addiction and a car addiction. Looking to get a new motorcycle next year though. Good night sweet bank account.

I do a pretty good job of supporting both habits but the truck takes the back burner. I'm probably going to do a few little things in the spring but I won't let it get in the way of my needs.