Misc Firearms Crew LXXIX: Tax Stamps, Background Checks, and Mag Caps

[JChippy]

Never hear of them other than seeing them on shelves in Costco.

Would not buy hazard freight. We went over this before when I said they are inconsistent and unreliable and everybody praises their warranty for a reason. I think blump got two of them (predators), and I think he had to get both repaired or replaced


2k watts? You can get a known-good brand quiet 2k inverter for like $430.
https://www.homedepot.com/p/WEN-Supe...200i/205825829

Slightly larger
https://www.homedepot.com/p/WEN-Supe...225i/308025806


Good brand 4k watt open frame inverter (fuel efficient and clean, but not as quiet as closed inverters) also $430
https://www.homedepot.com/p/WEN-RV-R...400i/311444607


Amazon has them too.

fwiw do have the wen 2350
haven't HAD to use it, but when doing to DD it asks for in the manual, was easy start up , more quiet than a lawn mower
picked it up for 419.99 + tax, shipping was free from their website. Was cheaper there than it was on amazon
still listed 419.99 on their website. The dipstick for checking oil does not come with it, annoyingly, but the dipstick that is "viewed by others or commonly purchased by others who also bought this item" that says is compatible with WEN, Yamaha, Predator, is compatible with the 2350 model.

May also be compatible with your predator if you already have one.

[spirit750]

Back to the light topic. I decided to finish out my budget light setup earlier this week while I decide on something more fancy for long term. Hopefully get everything delivered by Saturday (Fuk you USPS) and can post pics.

Streamlight Protac HL-X Rail Mount (already have, but $110)
Arisaka M-LOK offset mount ($45 wtf)
Cloud Defensive LCS MKII ($69)

[kingHanley]

Back to the light topic. I decided to finish out my budget light setup earlier this week while I decide on something more fancy for long term. Hopefully get everything delivered by Saturday (Fuk you USPS) and can post pics.

Streamlight Protac HL-X Rail Mount (already have, but $110)
Arisaka M-LOK offset mount ($45 wtf)
Cloud Defensive LCS MKII ($69)

I have that same setup, you can buy all this stuff cheaper on GAFS Subreddit (srs)

[spirit750]

I have that same setup, you can buy all this stuff cheaper on GAFS Subreddit (srs)

What is GAFS? Haven't ran across that one yet.

[gbullock32]

What is GAFS? Haven't ran across that one yet.

Here?

https://www.reddit.com/r/GunAccessoriesForSale/

[IronILLinois]

Here?

https://www.reddit.com/r/GunAccessoriesForSale/

Those phags will ban u for anything. Fkin phags

[kingHanley]

Those phags will ban u for anything. Fkin phags

I built my 16 inch rifle for $1200 ( all BCM and Troy ) just follow the rules srs

[spirit750]

Ah yeah, I'll follow that but I wouldn't wait for something that specific to show up to save a few bucks.

[criminal_manne]

Reddit is ghey. I do obsessively check r gundeals for chit though lol

[Griggz]

I built my 16 inch rifle for $1200 ( all BCM and Troy ) just follow the rules srs

i also do a ton of deals here. its great and any rule is to protect buyer/seller. Reddit as a whole is the worst site on the internet. been perma banned on multiple accounts and had to change my IP to make a new account and i only sub to gun related subreddits.

[DualRectifier]

I have yet to crank up the Champion generator I bought a couple years ago, from Costco I believe. Still in the box. Heading down to Florida this afternoon to buy a house, I'll get it set up in the garage...damn I can't wait to have a garage again. It's been sitting in storage units since I bought it.

Edit: obviously I won't run it in the garage, I just have a wheelset, pull handle, cover, extra cables, Seafoam/Stabil, gas cans, etc. I need to get together to set it up.

[IronILLinois]

i also do a ton of deals here. its great and any rule is to protect buyer/seller. Reddit as a whole is the worst site on the internet. been perma banned on multiple accounts and had to change my IP to make a new account and i only sub to gun related subreddits.

That’s what I did. It’s really unbelievable. These people that ban you call themselves the “anti-evil team”. Srs. Fking losers

[kingHanley]

Ah yeah, I'll follow that but I wouldn't wait for something that specific to show up to save a few bucks.

You can submit a post asking specifics. I got the whole set you you have for $150

[Farley1324]

Reddit is more communist leaning than the communist news network

I have yet to crank up the Champion generator I bought a couple years ago, from Costco I believe. Still in the box. Heading down to Florida this afternoon to buy a house, I'll get it set up in the garage...damn I can't wait to have a garage again. It's been sitting in storage units since I bought it.

Edit: obviously I won't run it in the garage, I just have a wheelset, pull handle, cover, extra cables, Seafoam/Stabil, gas cans, etc. I need to get together to set it up.

Definitely test it.

The last new generator I bought, would not work out of the box...the spark plug boot was broken during shipping. Couldn't even tell until troubleshooting to see why it wouldn't fire up, went to check for spark and...yeah that's a problem.

Gotta make sure new stuff isn't bricked from the get go

[spirit750]

Reddit is more communist leaning than the communist news network

Absolutely, but it can be pretty useful if you just NEVER EVER EVER swipe off the "Home" tab. Like never. Don't even think about it. Just imagine it's not there.

[IronILLinois]

just got one of these. what's the general consensus around here? seems pretty well put together for $70

[WrinklyGrandma]

Absolutely, but it can be pretty useful if you just NEVER EVER EVER swipe off the "Home" tab. Like never. Don't even think about it. Just imagine it's not there.

but then how would i have found r/baddragon and r/buttsharpies?

MFC, I think I might have an addiction. I've ordered 3 cans since mid-December
Started with a Sandman S, then a Helios QD, and today I ordered a Turbo K
wtf is wrong with me.

[rectifryer]

https://forum.bodybuilding.com/showt...hp?t=179831713

its time to get tf off this website

[2Rude4MyOwnGood]

I recently bought a Toolcraft chrome BCG and upon inspection I found some seemingly minor imperfections. I’m just not sure if it’s something that I should be concerned about, looking for some help please. I’ll likely butcher the terminology so it might be hard to explain, I’m pretty new to this...

On the underside, the “rails” (?) on which the BCG slides are kinda roughed up. It’s not terrible but it’s noticeable, and different than how my other BCGs look. If I run my finger across the area it’s definitely not perfectly smooth like my Aero BCGs are.

Is this something that I should be concerned about? I’m struggling to get a decent picture but I’ll try again tonight.

[IronILLinois]

but then how would i have found r/baddragon and r/buttsharpies?

MFC, I think I might have an addiction. I've ordered 3 cans since mid-December
Started with a Sandman S, then a Helios QD, and today I ordered a Turbo K
wtf is wrong with me.

at least u can buy them. protecting one of my most important senses is illegal over here.

https://forum.bodybuilding.com/showt...hp?t=179831713

its time to get tf off this website

hnnnnng later phags

[LinuxJon]

This ammo shortage is getting stupid. For a long time I couldn't find any 5.56 but birdshot was everywhere. Got into shooting clays. Now I haven't seen birdshot in weeks but I know like three places to buy 5.56. Also suddenly buckshot is everywhere but .40 has vanished for the first time.

[criminal_manne]

I recently bought a Toolcraft chrome BCG and upon inspection I found some seemingly minor imperfections. I’m just not sure if it’s something that I should be concerned about, looking for some help please. I’ll likely butcher the terminology so it might be hard to explain, I’m pretty new to this...

On the underside, the “rails” (?) on which the BCG slides are kinda roughed up. It’s not terrible but it’s noticeable, and different than how my other BCGs look. If I run my finger across the area it’s definitely not perfectly smooth like my Aero BCGs are.

Is this something that I should be concerned about? I’m struggling to get a decent picture but I’ll try again tonight.

No just go shoot it

[kingHanley]

I recently bought a Toolcraft chrome BCG and upon inspection I found some seemingly minor imperfections. I’m just not sure if it’s something that I should be concerned about, looking for some help please. I’ll likely butcher the terminology so it might be hard to explain, I’m pretty new to this...

On the underside, the “rails” (?) on which the BCG slides are kinda roughed up. It’s not terrible but it’s noticeable, and different than how my other BCGs look. If I run my finger across the area it’s definitely not perfectly smooth like my Aero BCGs are.

Is this something that I should be concerned about? I’m struggling to get a decent picture but I’ll try again tonight.

Pics phaggot . But srs they probably test **** it prior to sale . Kind of like BCM does.

[DualRectifier]

Reddit is more communist leaning than the communist news network



Definitely test it.

The last new generator I bought, would not work out of the box...the spark plug boot was broken during shipping. Couldn't even tell until troubleshooting to see why it wouldn't fire up, went to check for spark and...yeah that's a problem.

Gotta make sure new stuff isn't bricked from the get go

I'd be pretty pissed about that. I know a generator is one of those things that you know 100% you can rely on, a bad plug boot could send me through the fukking roof.

I know i need to test it, just haven't had a chance moving across the country three times in two years

[Farley1324]

I'd be pretty pissed about that. I know a generator is one of those things that you know 100% you can rely on, a bad plug boot could send me through the fukking roof.

I know i need to test it, just haven't had a chance moving across the country three times in two years

Shipping damage happens, nothing anybody can really do about that. I mean, since we're being cheap, these WEN/Champion/Predator/etc are made in Chyna so there's a lot of shipping in between.

You can't 100% rely on something you've never tested is the lesson there IMO

They are more of a pain to move after they've been used (gasoline), because, well, gasoline. Gotta siphon out the tank or run it till it's totally empty or have another thing with gas in it to deal with

[Farley1324]

Tries to steal gun at a gun training class at a gun store

Stabs responding LEO with screwdriver

Gets shot by like 5 people simultaneously

[gbullock32]

Tries to steal gun at a gun training class at a gun store

Stabs responding LEO with screwdriver

Gets shot by like 5 people simultaneously

I wonder if he even considered that people who own and are training with guns just might be willing to shoot him.

[OfficerJimLahey]

I wonder if he even considered that people who own and are training with guns just might be willing to shoot him.

life is hard when you're ****ing stupid.

[taf1968]

Tries to steal gun at a gun training class at a gun store

Stabs responding LEO with screwdriver

Gets shot by like 5 people simultaneously

[youtube]xbN4egPBT3U[youtube]

[Rajeev762x39]

I wonder if he even considered that people who own and are training with guns just might be willing to shoot him.