The Official Craigslist Thread (Round 4)

[murphyreedus]

Anyone recognize this lat pulldown? Has a Bigger Faster Stronger look, but not quite the same as theirs.

Also has somewhat of a older Williams Strength look. Doesn't matter now, it lives in my basement. No markings on it.

[urbanlifter]

X3 bar for sale, only $400!!!! Triple the gains, better act fast before it's gone.....

https://dayton.craigslist.org/spo/d/...006447921.html

[murphyreedus]

Is a Jam'n Squat machine worth picking up? It's priced right and seemed nice to use for the few unweighted squats I tried, but I'm wondering if there's any added value when I already have a belt squat. Not much info found for this particular machine.

[matrix563]

Is a Jam'n Squat machine worth picking up? It's priced right and seemed nice to use for the few unweighted squats I tried, but I'm wondering if there's any added value when I already have a belt squat. Not much info found for this particular machine.

i tried a similar one because i wanted to sell my magnum perfect squat but still wanted a standing calf. the pads on the calf raise werent thick enough and too firm and i could feel pressure pain where the pad rested totally on the point above the clavicle.

i guess pads could always be replaced but the guy wanted too much and i had the magnum. the magnum pad is perfect thickness and some softness to prevent any loading of a single point.


just make sure to try it for comfort. i brought 2 25s to test it with to be sure.

[Deep-Voiced-One]

Anyone recognize this lat pulldown? Has a Bigger Faster Stronger look, but not quite the same as theirs.

It also kinda looks like SOA (State of the arc) Welding's custom lat pulldown.

[murphyreedus]

i tried a similar one because i wanted to sell my magnum perfect squat but still wanted a standing calf. the pads on the calf raise werent thick enough and too firm and i could feel pressure pain where the pad rested totally on the point above the clavicle.

i guess pads could always be replaced but the guy wanted too much and i had the magnum. the magnum pad is perfect thickness and some softness to prevent any loading of a single point.


just make sure to try it for comfort. i brought 2 25s to test it with to be sure.

Thanks, if I go back to look at it I'll bring some weights. I vaguely remember using one at the last commercial gym I was at, but I didn't put in a lot of time with it. As of right now I'm having a hard time justifying trying to find space for it, since it's something like a 5x3 footprint and I'd have to re-work the jigsaw puzzle that is my current gym. Just don't want to pass on it for that price and then wish I had picked it up later, since the few times I've seen these types of leverage squats for sale they're usually stupidly overpriced.

It also kinda looks like SOA (State of the arc) Welding's custom lat pulldown.

Can't find a picture of their stuff. I wouldn't be surprised if this was built by some small-time shop. I picked up a similarly constructed plate tree from the guy, also with no markings.

On spread with everyone as usual.

[Duplicitous]

El Paso, TX. 5 Cybex selectorized pieces and a pizza oven with bids currently ranging from $10-25. OK, I'm kidding about the pizza oven.

https://larryottenauctioneers.hibid....-auction/?q=80

[matrix563]

As of right now I'm having a hard time justifying trying to find space for it, since it's something like a 5x3 footprint and I'd have to re-work the jigsaw puzzle that is my current gym. Just don't want to pass on it for that price and then wish I had picked it up later, since the few times I've seen these types of leverage squats for sale they're usually stupidly overpriced.

in the end too, i gave up looking. no one wanted the magnum or were low balling. plus, like you said a standing calf raise is about the same footprint as the magnum. just looks smaller since its not as robust. magnum is great for shoulder shrugs as well.

[Duplicitous]

Oakland, NJ. Elite FTS squat rack w/ weight storage for $450.

https://www.********.com/photo.php?f...type=3&theater

[Bench905]

Sold for $888.75. Maybe someone on here bought it and will say something to the extent of "something legendary is coming." smh

One of them was listed for $1,500 on FB Marketplace.

[Deep-Voiced-One]

Thanks, if I go back to look at it I'll bring some weights. I vaguely remember using one at the last commercial gym I was at, but I didn't put in a lot of time with it. As of right now I'm having a hard time justifying trying to find space for it, since it's something like a 5x3 footprint and I'd have to re-work the jigsaw puzzle that is my current gym. Just don't want to pass on it for that price and then wish I had picked it up later, since the few times I've seen these types of leverage squats for sale they're usually stupidly overpriced.



Can't find a picture of their stuff. I wouldn't be surprised if this was built by some small-time shop. I picked up a similarly constructed plate tree from the guy, also with no markings.

On spread with everyone as usual.

Here's a link to SOA's lat machine, looks sort of similar...

https://www.soawelding.com/plate-loa...down-w-low-row

[aldunn1981]

Dont have enough posts apparently to post link l, but check out Buffalo Craigslist for Hammer strength

Someone actually selling something

[2fletcher]

3 really nice Powerlift Racks for sale at the local university. Nashville TN Craigslist post

https://nashville.craigslist.org/spo...026337837.html

[perly1998]

paint anything battleship gray and it loses its luster

Totally agree!

[boxer_for_life]

Leg press & hack squat combo with linear bearings for $350 in Riverside, Ca.: https://offerup.com/item/detail/795458672/



Details on the unit: https://www.hudsonsteelco.com/produc...squat-station/

[Mikesl]

Putting my first ever home gym together. Was hoping to get feedback from those of you who have a grasp on equipment and their price. What do you guys think of this Precor Power Rack for $200?


htt ps:/ /imgu r. co m/a/UYAOxsC

(sorry for posting the link like that, says I need 50 posts to be able to post pictures)

[Duplicitous]

Putting my first ever home gym together. Was hoping to get feedback from those of you who have a grasp on equipment and their price. What do you guys think of this Precor Power Rack for $200?


htt ps:/ /imgu r. co m/a/UYAOxsC

(sorry for posting the link like that, says I need 50 posts to be able to post pictures)

It's very basic, but it'll get the job done. It would be a fair price in my market. What's the budget for the rack?

[EricAtl]

Putting my first ever home gym together. Was hoping to get feedback from those of you who have a grasp on equipment and their price. What do you guys think of this Precor Power Rack for $200?


htt ps:/ /imgu r. co m/a/UYAOxsC

(sorry for posting the link like that, says I need 50 posts to be able to post pictures)

Proper link:
https://m.imgur.com/a/UYAOxsC
Looks like 3 inch hole spacing.

[Mikesl]

It's very basic, but it'll get the job done. It would be a fair price in my market. What's the budget for the rack?

Proper link:
Looks like 3 inch hole spacing.

Trying to keep it under $400 if possible. The rack is the last thing I need to get the ball rolling with this home gym set up. I already picked up the following:


Rogue Cast Iron Plates
-8 X 45lb
-2 x 25lb
-4 x 10lb
-2 x 5
-2 x 2.5

for $465 (.53/lb)


Rogue HG 2.0 Bumpers
-4 x 45lb
-2 x 35lb
-2 x 25lb
-2 x 10bl

Plus Rouge Ohio Bar

for $450


Curious what you guys think on those deals?


Also picked up the Ethos Olympic Rack from Dick's since it is on clearance for $130. Figured I'd be spending ~100+ for a decent flat bench to use in the rack and I have the room for it, so just went for that Westside 2.0 knockoff for $130. This bench does give me some flexibility with racks since westside spacing on a rack isn't really a priority anymore.

I also already have both a wall mounted pull up bar + a dedicated dip station. So again, gives me a little more flexibility with racks since I don't have the need for a rack that can be customized to add those features. I really can't think of any accessories I would need on a rack. Maybe a landmine? But I've honestly never used one before, just stick to BB/DB Rows.


So yeah, last thing I need is the rack and Id be lying if I said I wasn't getting a little impatient. Not seeing to many great deals on rack on the second hand markets. Thinking of just picking up a T-3 from Titan and calling it a day...


The things I like about the Precor:

- If I am not mistaken, it is commercial quality?
- The thing looks like a tank and probably doesn't need to be bolted down?
- Price is okay? The guy had it listed for $400, I offered $200 3 weeks ago and he declined. He messaged me back asking if I was still interested and said he'd do $200. Maybe he needs some x-mas money..


The things I don't like about the Precor:

- Gonna be a hassle to move it. Will probably have to rent a truck to move it (and also keeping this in mind if I need to move it in the future)
- The rack has been primed and needs to be painted. I guess this one doesn't really bother me, I actually kind of like the way it looks..
- One of the safety pins was primed and painted white... WTF? Why would you do this to chrome???
- Cant really customize. Again, not really something I need. But not sure if my priorities will change in the future.


Appreciate the replies and would appreciate any other feedback you guys have

[murphyreedus]

Anyone used the Vectra Vector FID bench? Can't find much for specs or reviews online. Wondering if it's sturdy in the incline and flat positions.

[murphyreedus]

Picked it up. No where near as heavy duty as my Dynamic FI bench, but feels sturdy and adjusts easily. It is a ladder style. The ladder "rungs" are only 11 or 12 gauge, unlike the super thick ones on the Dynamic, but should be strong enough. What Vectra info I could find warrantied it for commercial use, but I'd say is closer in build to something like the old USA-made Powerblock ladder bench.

Next to the Dynamic:

[NoobMulder]

Trying to keep it under $400 if possible. The rack is the last


So yeah, last thing I


The things I like about the Precor:

- If I am not mistaken, it is commercial quality?
- The thing looks like a tank and probably doesn't need to be bolted down?
- Price is okay? The guy had it listed for $400, I offered $200 3 weeks ago and he declined. He messaged me back asking if I was still interested and said he'd do $200. Maybe he needs some x-mas money..


The things I don't like about the Precor:

- Gonna be a hassle to move it. Will probably have to rent a truck to move it (and also keeping this in mind if I need to move it in the future)
- The rack has been primed and needs to be painted. I guess this one doesn't really bother me, I actually kind of like the way it looks..
- One of the safety pins was primed and painted white... WTF? Why would you do this to chrome???
- Cant really customize. Again, not really something I need. But not sure if my priorities will change in the future.


Appreciate the replies and would appreciate any other feedback you guys have

I owned this rack years back and it is heavier than it looks.It does not need to be bolted down.
The hole spacing was a bummer at times, but I used cut up rubber mats under my bench legs to raise the height to get by.
I got mine for $200
Its a great, heavy bomb proof rack and no doubt those crash bars will take some abuse.
Someone literally around the corner has the same precor/icarian in good condition, I am in the market for a new rack, but I will take my chances with the Titan X3 Flat foot tall if I dont find a steal on something on cl or offer up soon

[matrix563]

i had the similar promaxima version. it is heavy but even then when i wasnt too strong i could carry one side. was awkward but i could
still heavier than any 11 gauge rack.

[swimmer32]

Does anybody have any experience with Steelflex equipment? There are a couple used pieces for sale near me. Here is their web site:

https://fmiamerica.com/product/steel...incline-press/

[SomeIronBoy]

Does anybody have any experience with Steelflex equipment? There are a couple used pieces for sale near me. Here is their web site:

https://fmiamerica.com/product/steel...incline-press/

I could've sworn these are cheap Alibaba pieces of equipment

[swimmer32]

I could've sworn these are cheap Alibaba pieces of equipment

Looks like it's made in Texas from Fitness Masters Inc. A little bit of info in the "Cost No Object" thread. Seems to have a decent reputation. I'll be sure to post pictures if I move forward.

[swimmer32]

I went ahead and picked up the incline press and shoulder press today. Really impressed with them so far! I'm still trying to figure out exactly how I want them arranged in my gym, so I haven't put them through a full workout yet. But they look fantastic, and, most importantly, the black and red matches my rack and the look of my gym. I'll report back after I put some weight on them and get a couple workouts in. So far, so good.

incline press.jpg
shoulder press.jpg

[urbanlifter]

VERY tempting, lots of nice stuff for sale up north.......



https://www.govdeals.com/index.cfm?f...94&acctid=2218

[swimmer32]

VERY tempting, lots of nice stuff for sale up north.......



https://www.govdeals.com/index.cfm?f...94&acctid=2218

Ended up going for over $1K. I'd love to add a pullover to my gym - no idea where I'd put it.

[urbanlifter]

Ended up going for over $1K. I'd love to add a pullover to my gym - no idea where I'd put it.

Honestly I'm not surprised, if I recall correctly that early model was rather rare and sought after. Sometimes I wish I would have kept my SuperPullover, but I still understand why I sold it. Fantastic machine but they take up so much space for such limited use. I decided to pass on the one in the picture even though it was rare, having to load plates in the rear would be a pain in the butt and eat up even more floor space.