The Official Craigslist Thread (Round 4)

[TomGallopavo]

Powerblock in rough shape....

.shopgoodwill.com/Item/108235885

[Duplicitous]

https://www.********.com/marketplace...36782419872025
Hoist Quick Change Dumbbell System with Foldable Bench 5 - 75 lbs $650 Wayne, NJ. Near NYC.
Too far for me to drive, otherwise I'd be all over it.
Pretty sweet setup

I sold a set of the Ironmaster-branded ones w/ stand (no bench) for $380 pre-COVID and they took awhile to sell at that price. Now the 75 sets are flying at $600. At the peak of the pandemic, they were selling for even more. I'm actually sorry I sold the ones I had as they had the stand where the plates sat alongside the handles.

[Duplicitous]

Hampton, VA. Ironmaster bench. $150

https://www.********.com/marketplace...code=undefined

[Duplicitous]

New Carlisle, OH. Hammer Strength preacher curl. $150. These usually go for about $400 in my area.

https://www.********.com/marketplace...3961134950090/

[Duplicitous]

Good simulator. Did you manage to buy it?

Way too far for me to drive, but it's a good deal if someone here is looking for one and lives in the area.

[POTA]

Really cool set of Ferrigno Olympic plates up in Rhode Island. 475 pounds worth. I know the seller recently restored them too, so they're pristine. I wish I lived within driving distance because the price is worth it to me.
https://providence.craigslist.org/sp...25375492.html#

[Duplicitous]

Hoist adjustable bench in Long Island, NY. $35

https://www.********.com/marketplace...1734503349796/

[Duplicitous]

Youngstown, OH. Parabody hack squat / leg press combo for $350. Foot plate is tiny, but that's easily remedied.

https://www.********.com/commerce/li...are_attachment

[Deep-Voiced-One]

Youngstown, OH. Parabody hack squat / leg press combo for $350. Foot plate is tiny, but that's easily remedied.

https://www.********.com/commerce/li...are_attachment

Duplicitous, PM sent.

[ampire]

Ironmaster bench with Orange Theory branding $145 Hampton VA
https://www.********.com/marketplace...code=undefined

I am no expert on IM benches but it looks like its missing one square tube seat mount at the wheel end.

[matrix563]

Ironmaster bench with Orange Theory branding $145 Hampton VA
https://www.********.com/marketplace...code=undefined

I am no expert on IM benches but it looks like its missing one square tube seat mount at the wheel end.

I had a few of these. Weird feel no pad but not too bad

[urbanlifter]

I am no expert on IM benches but it looks like its missing one square tube seat mount at the wheel end.

Don't think IM makes this compact version anymore, it was like 14-15" from the ground and didn't have padding. Probably explains the Orange Theory logo, seemed like it would only be good for training small women who wanted it to double as a 'step up' platform.

[deadwoodgregg]

Rogers Athletic Pendulum 5-way neck $300

https://dallas.craigslist.org/dal/sp...219387094.html

[Duplicitous]

Rogers Athletic Pendulum 5-way neck $300

https://dallas.craigslist.org/dal/sp...219387094.html

Nice. Massive profit flip if you live in that area.

[BiGx5MurF]

I've been browsing this thread full of envy. But it's finally my turn.

Just got this Life Fitness 9100HR treadmill for $100 delivered! It needs work though, runs loud, and some LED displays are out. But looking forward to restoring this.

[Duplicitous]

I've been browsing this thread full of envy. But it's finally my turn.

Just got this Life Fitness 9100HR treadmill for $100 delivered! It needs work though, runs loud, and some LED displays are out. But looking forward to restoring this.

With delivery it's a small investment, but cardio equipment can go south quickly. Best of luck with it.

[ampire]

Pricey, but rare and pretty cool, the Powerblock Pro Aluminum 10-90 (all metal pro rexan alternative)
Local pickup Duluth MN $1300. I think it is extremely overpriced but neat all the same.
https://www.ebay.com/itm/PowerBlock-.../184481603087?

[Duplicitous]

Pricey, but rare and pretty cool, the Powerblock Pro Aluminum 10-90 (all metal pro rexan alternative)
Local pickup Duluth MN $1300
https://www.ebay.com/itm/PowerBlock-.../184481603087?

Cool set, but pricey AF.

[BulkMore]

Some nice equipment in cincinatti OH, hammer strength stuff.

https://www.govdeals.com/index.cfm?f...0&StartRow=101

[BiGx5MurF]

Yay or Nay? Guy says he's got 8 plates. I've got 500lbs worth of similar Troy plates on the way, but dumbbell buddy says they're 4 weeks out.

offerup.com/item/detail/1030780918/

[Duplicitous]

Yay or Nay? Guy says he's got 8 plates. I've got 500lbs worth of similar Troy plates on the way, but dumbbell buddy says they're 4 weeks out.

offerup.com/item/detail/1030780918/

I'm not a fan of these plates due to their shape, which is awkward for DL'ing. If I was going to pay that much per lb, I'd be looking for a plate where I didn't feel like I was settling.

[murphyreedus]

Yay or Nay? Guy says he's got 8 plates. I've got 500lbs worth of similar Troy plates on the way, but dumbbell buddy says they're 4 weeks out.

offerup.com/item/detail/1030780918/

Hard no at $2.50/pound.

[BiGx5MurF]

I'm not a fan of these plates due to their shape, which is awkward for DL'ing. If I was going to pay that much per lb, I'd be looking for a plate where I didn't feel like I was settling.

My local gym uses these exact plates, I wasn't aware of any issues DL'ing them. I've had back issues in the past, so I tend to stick to rack pulls.

Hard no at $2.50/pound.

Cast iron weider plates go for $2/lb on my local classifieds, as do cast iron fitness gear plates

[Duplicitous]

My local gym uses these exact plates, I wasn't aware of any issues DL'ing them. I've had back issues in the past, so I tend to stick to rack pulls.

It's just the shape of them that doesn't lend itself to DL'ing. If all of the plates aren't facing exactly the same way the bar comes down awkwardly and kind of rolls in random directions.

[gabsonfire]

Revolver 100lb pair- new- philadelphia area

southjersey.craigslist.org/spo/d/swedesboro-ivanko-revolver-100lb/7249183816.html

[Duplicitous]

Body Master bench in Asheville, NC for $100.

https://www.********.com/marketplace...code=undefined

[ampire]

Body Master bench in Asheville, NC for $100.

https://www.********.com/marketplace...code=undefined

Nice deal looks like Body Masters B-109A maybe. https://www.fullcirclepadding.com/st...ncline-b-109a/

[Duplicitous]

Winchester, VA. Hammer Strength seated calf, $250.

https://www.********.com/marketplace...0892362591805/

Same woman has a LF seated leg curl for $350. Fair price normally. Very good price right now.

https://www.********.com/marketplace...4296372633645/

[ampire]

Could use some advice, I have 38x 10lb, 8x 7.5lb, 14x 5lb, 16x 2.5lb, 10x 1.25lb pancake plates, one each of 38mm CFFit SDH1,2,3,4,5 handles with screws and washers for each, as well as also having hex bolt and hex end caps for each handle.

Should I pre-assemble some popular sizes and sell them on Craigslist/******** or should I sell the handles seperate on eBay and the plates for on CL/FB?

What do you think the going rate is per pound for a pre-assembled dumbbell? Likewise, what is a going rate for a standard pancake plate per pound? Trying to decide on the most lucrative but equally considering the most rapid way to unload these because I don't want to spend a full year selling them. They take up a lot of space.

[SomeIronBoy]

Could use some advice, I have 38x 10lb, 8x 7.5lb, 14x 5lb, 16x 2.5lb, 10x 1.25lb pancake plates, one each of 38mm CFFit SDH1,2,3,4,5 handles with screws and washers for each, as well as also having hex bolt and hex end caps for each handle.

Should I pre-assemble some popular sizes and sell them on Craigslist/******** or should I sell the handles seperate on eBay and the plates for on CL/FB?

What do you think the going rate is per pound for a pre-assembled dumbbell? Likewise, what is a going rate for a standard pancake plate per pound? Trying to decide on the most lucrative but equally considering the most rapid way to unload these because I don't want to spend a full year selling them. They take up a lot of space.

I don't know the market there, but pro styles with those handles, as long as the plates aren't all rusty, I'd sell for $2LB. or $2.25lb with the end caps. Although, if sold separately they would probably be eBay items... handles fetching anywhere between $30-$50 per pair. Endcaps between $4-$7, and plates between $2-$4lb dependant on size. But keep in mind fees and shipping.

Hope this helps