The Official Craigslist Thread (Round 4)

[urbanlifter]

What is a fair price for a Hoist V6 functional trainer with 2 150lb weight stacks? Looking to pick one up and wanted to see what a reasonable offer would be.

Calculation: MSRP(50%) +/- Condition = Price

Or

About Tree Fiddy...

[Bignick31985]

Found some OMEZH online. 12 45s for $450...I only bought 4, so there are 8 more out there guys!

[irongrandpa]

Found some OMEZH online. 12 45s for $450...I only bought 4, so there are 8 more out there guys!

Tempted to NEG for not getting all of them.

[fat2fitbeast]

I just scored 6 used buddy capps power bars for 50 a piece. Cleaned em up and they are in great shape. Not bent or anything. Knurling is worn down near sleeves from reracking.

[murphyreedus]

Anyone encountered Cap old school bumpers? Just curious if they're comparable in quality to the similar Hampton bumpers. I didn't know that Cap even made this style.

[cwcmac]

https://www.********.com/marketplace...3596696433400/

Fishers Indiana: Hoist (ironmaster) dumbbells with stand for $75. I’m guessing they’re gone by now but you never know.

[ampire]

Anyone encountered Cap old school bumpers? Just curious if they're comparable in quality to the similar Hampton bumpers. I didn't know that Cap even made this style.

If they are rubber or urethane and they are old and dry be prepared for possibility of cracking.

[murphyreedus]

If they are rubber or urethane and they are old and dry be prepared for possibility of cracking.

Yeah, never went and looked at them. Picked up new Hamptons instead. Now I've successfully made it like 2 weeks without buying anything.

[sera310]

never mind

[murphyreedus]

Here's 1 for you: a homemade wooden power rack, Marcy flat bench, Rogue Echo bar and 12 Rogue econo bumpers, all for only $800: https://memphis.craigslist.org/spo/d...752230407.html

I'm sure it's gone already since it's such a smokin deal, but this might belong in the Dreamer thread.

[sera310]

I'm sure it's gone already since it's such a smokin deal, but this might belong in the Dreamer thread.

Oh you're right, I mixed them up

[ekkertmal]

I've been trying to start my own home gym for a while now and I recently picked up some weights. With the help of this forum I think I've brought them back to a somewhat decent shape. Now I'm debating on painting them or not. I really don't feel like dealing with rust removal again.

Did about 9 gallons of vinegar in a tote and let each set of weights soak for ~24 hours sometimes a couple days if I felt like it was needed. Moved them to the tub and rinsed/scrubbed with a brush+ scour pad with dish soap in hot water. Do i need to do more before paint? Should I paint?

[ekkertmal]

few more, sorry if this is too much

[irongrandpa]

ekkertmal, I would just oil them really well, but I like the look of vintage iron.

[keyboardworkout]

Arizona bros.

These racks and benches look decent for $490 each set.

https://phoenix.craigslist.org/evl/s...762618770.html

[kram1979]

York STS Half Rack & Multi-function bench for $700 in south Jersey.

https://southjersey.craigslist.org/s...778816714.html

Looks pretty decent for the price.

[OldButGame]

ekkertmal, I would just oil them really well, but I like the look of vintage iron.

Agreed,...If You're comfortable with it,...it has a kind of 'classy' vintage look like irongrandpa said,...At this point its more..'What do You prefer aesthetically?'

[matrix563]

York STS Half Rack & Multi-function bench for $700 in south Jersey.

https://southjersey.craigslist.org/s...778816714.html

Looks pretty decent for the price.

that is very nice. i have 2 similar half racks and a 3/4 rack. wynmor is always quality. always nice to get it for pennies on the dollar!

[urbanlifter]

Solid deal on a starter setup, Tuff Stuff pop-pin rack with pulldown stack for $250. What's not to like?

https://www.********.com/marketplace...8470461375480/

[matrix563]

Solid deal on a starter setup, Tuff Stuff pop-pin rack with pulldown stack for $250. What's not to like?

https://www.********.com/marketplace...8470461375480/

thats the same rack and lat i hooked my friend matt up with. very nice rack but poor choice where the pop pins are on the jcups, only negative i can think of

[urbanlifter]

thats the same rack and lar i hooked my friend matt up with. very nice rack but poor choice where the pop pins are on the jcups, only negative i can think of

Even after all my racks I still appreciate these pop-pins for the simplicity! Bodycraft, Parabody, Tuff Stuff, or even Body Solid. Hard to ask for a better rack at prices like this, easy to adjust and when you want to rearrange its an easy breakdown. My Pro-Elite was a steal but it was a MFER to move around.

[matrix563]

https://raleigh.craigslist.org/spo/d...777251395.html

not mine a pretty decent deal. someone give them a good home! blows those ebay prices out of the water for sure lol

[matrix563]

Even after all my racks I still appreciate these pop-pins for the simplicity! Bodycraft, Parabody, Tuff Stuff, or even Body Solid. Hard to ask for a better rack at prices like this, easy to adjust and when you want to rearrange its an easy breakdown. My Pro-Elite was a steal but it was a MFER to move around.

pop pins are definitely nice. i have a parabody with lat ti sell after i sell a nautilus with lat.

the solid feeling of my 7 gauge 3/4 rack cant be beat tho.

[aloosecannon]

Bear squat machine. First one of these I've seen pop up on Craigslist here.
https://pittsburgh.craigslist.org/sp...783827618.html

[EricAtl]

Bear squat machine. First one of these I've seen pop up on Craigslist here.
https://pittsburgh.craigslist.org/sp...783827618.html

There has been one for sale in Atlanta for a while for $800
https://atlanta.craigslist.org/nat/s...779986739.html

[irongrandpa]

Bear squat machine. First one of these I've seen pop up on Craigslist here.
https://pittsburgh.craigslist.org/sp...783827618.html

That looks like one that was sold at auction from U Pitt awhile back. I really like the Bear Squat machines, although the newer models with horizontal weight horns are much easier to load/unload.

[etd66ss]

Unfortunately I cannot post links yet, but my CL deal was from a seller about 4 miles away.

Bars:

Olympic 7' (QTY 2) They are both black oxide and not chrome, seem to be of much higher quality that my flaking chrome CAP 7' bar.

Olympic dumbbell bars (QTY 2) - Chrome

1" spinlock EZ Curl (QTY 1) - Chrome

1" spinlock dumbbell (QTY 4) - Chrome, but looks to be US chrome not the flaking off Chinese chrome

Olympic plates: Various manufactures like York, Ivanko & CAP

45lb (QTY 8)

35lb (QTY 8)

25lb (QTY 12)

10lb (QTY 8)

5lb (QTY 4)

2.5lb (QTY 2)


1" plates: Various manufactures, will have to inventory all the different names

50lb (QTY 6)

25lb (QTY 6)

20lb (QTY 6)

12.5lb (QTY 4)

10lb (QTY 12)

5lb (QTY 20)

3lb (QTY 2)

2.5lb (QTY 10)

1.5lb (QTY 4)

70lb hex dumbbell (QTY 2)

And a beat up TDS "Mega Bench"

I paid $850 for everything. When I have enough posts I'd like to post pictures to help identify the bars. I plan to buy the York solid dumbbell handles and use the 1" plates to make a useful dumbbell set out of everything. All the plates need to be sandblasted and painted pretty much, some of them are quite rusted.

[jdforsy]

Sorinex dark horse needs a new home at a very reasonable price


https://denver.craigslist.org/spo/d/...789261850.html

[ampire]

This seller has Hammer Strength Weight Trees in yellow here in Annapolis/Baltimore MD for $150 each, not bad I guess.
https://baltimore.craigslist.org/spo...793132163.html

[irongrandpa]

This seller has Hammer Strength Weight Trees in yellow here in Annapolis/Baltimore MD for $150 each, not bad I guess.
https://baltimore.craigslist.org/spo...793132163.html

Average price as I've seen them from $150 - $200. Great shape if you can deal with that yellow.