|
-
07-21-2017, 05:33 PM #1021
-
07-21-2017, 06:27 PM #1022
-
07-21-2017, 07:00 PM #1023
I own the one in the photo, I paid $700 shipped for it. I've posted a review of it on here in the past. It does the job but I'd say rogues fit/finish is going to be better but you pay for it and personally I would have liked it to have a one piece swing arm. The original swing arm he sent me had a lot of side to side movement in the joint where the two half bolted together so he redesigned it and sent me a replacement which is a lot better.
[M]===[6] Mech6 Crew #33 [M]===[6]
-
07-21-2017, 08:14 PM #1024
-
-
07-21-2017, 08:28 PM #1025
-
07-21-2017, 08:33 PM #1026
It sounds like he changed the design a lot on yours. I have one from him that came with a bulk order. He charged me $600 for mine, but it was the older design with the 4 posts. Shipping was part of the larger order, so I can't say how much it would have cost as a standalone purchase.
The one he sent me is honestly the most comfortable RH I have ever used.
()---() York Barbell Club #76 (RH) ()---()
[]---[] Ivanko Barbell Crew #98 []---[]
-
07-22-2017, 11:50 AM #1027
-
07-22-2017, 05:51 PM #1028
-
-
07-22-2017, 06:57 PM #1029()---() York Barbell Club #76 (RH) ()---()
[]---[] Ivanko Barbell Crew #98 []---[]
-
07-22-2017, 07:00 PM #1030
- Join Date: Apr 2013
- Location: Kansas, United States
- Age: 40
- Posts: 22,368
- Rep Power: 97617
-
07-22-2017, 07:02 PM #1031
-
07-22-2017, 07:16 PM #1032
-
-
07-22-2017, 07:33 PM #1033
- Join Date: Jun 2015
- Location: South Carolina, United States
- Age: 50
- Posts: 2,528
- Rep Power: 14676
SQ 475# 5/26/17 wraps
BP 340# 7/13/19 paused
DL 455# 10/19/19 beltless
OHP 205# 1/12/19
()---() York Barbell Club #72 ()---()
──<//>─<\\>── BWTG Cluster #15 ──<//>─<\\>──
[M]====[6]▪ Mech6 Crew #32 ▪[M]====[6]
▪█─────█▪ Equipment Crew #70▪█─────█▪
https://forum.bodybuilding.com/attachment.php?attachmentid=9015131&d=1541967331
-
07-22-2017, 07:33 PM #1034
- Join Date: Jun 2007
- Location: Colorado, United States
- Age: 44
- Posts: 1,848
- Rep Power: 18264
-
07-22-2017, 07:38 PM #1035
-
07-22-2017, 07:42 PM #1036
-
-
07-22-2017, 07:48 PM #1037
-
07-22-2017, 07:50 PM #1038
- Join Date: Jun 2015
- Location: South Carolina, United States
- Age: 50
- Posts: 2,528
- Rep Power: 14676
SQ 475# 5/26/17 wraps
BP 340# 7/13/19 paused
DL 455# 10/19/19 beltless
OHP 205# 1/12/19
()---() York Barbell Club #72 ()---()
──<//>─<\\>── BWTG Cluster #15 ──<//>─<\\>──
[M]====[6]▪ Mech6 Crew #32 ▪[M]====[6]
▪█─────█▪ Equipment Crew #70▪█─────█▪
https://forum.bodybuilding.com/attachment.php?attachmentid=9015131&d=1541967331
-
07-22-2017, 08:04 PM #1039
-
07-22-2017, 08:09 PM #1040
- Join Date: Mar 2014
- Location: Hamilton, Ontario, Canada
- Age: 51
- Posts: 2,722
- Rep Power: 9202
-
-
07-22-2017, 08:15 PM #1041
Still in transformation (GHD, Rack and some bars) and restoration (RH Dumbbells ,45 degree and plates) phase.I will in due course of time. Had life fitness FI bench which I sold back to the seller ( flipper for 25 years) at the same price as did not like it. It was pop pin. He was nice enough to take it back.
Made a deal on Atlantis standing preacher curl but the damn thing would not fit in my jeep. Had to let it go. The seller also had Atlantis T-bar row
Like I thought /said 7 to 8 years ago , I should have gotten 6' bed or 8' bed pick up truck. Now there is no excuse..
Both Atlantis pieces would have been in my gym only if I had a pick up truck.
btw, did rent pick up truck twice in last 6 months.. This forum can be really really bad on your wallet. But you can always get you money back ( at least most of it.)[M]===[6]▪ Mech6 Crew #35 ▪[M]===[6]
[]------[] York Barbell Club #80 (DD)[]-----[]
-
07-22-2017, 08:58 PM #1042
- Join Date: Aug 2008
- Location: Ohio, United States
- Age: 41
- Posts: 7,278
- Rep Power: 39183
It's the GOAT man, would trade my Legend 3103 for one of those in a heartbeat. It's ONLY flaw is the padding is like 10 or 10.5" wide, everything else is on point. The padding is the nicest I have ever owned (firm and tough), fast incline adjustments, horizontal front handle for easy grab, backrest pop-pin is conveniently out of the way, and from what I recall it was actually 16.5" tall for leg drive (or slightly sub 17"). Some day another will surface in my area, some day...
▪█─────█▪ Equipment Crew #58 ▪█─────█▪
-
07-22-2017, 09:52 PM #1043
-
07-22-2017, 10:35 PM #1044
-
-
07-22-2017, 11:28 PM #1045
-
07-22-2017, 11:39 PM #1046
- Join Date: Aug 2008
- Location: Ohio, United States
- Age: 41
- Posts: 7,278
- Rep Power: 39183
It's kinda like a hybrid between the two, a combination of a pop-pin and ladder style for quick adjustments to the incline you need. So when you pull the backrest up the white rollers glide along the black guides under the bench. Once they are resting at the rear then you can make pop-pin adjustments to change the angle. What I really liked on chest day is that you can do your flat work, and then when you move into incline you can have the pop-pin pre-set to the right angle for a quick adjustment. The seat is also a simple adjustment, just one height setting and for me it was perfect for everything. Which always leaves you with ZERO pad gap and you don't have to mess with the pads mashing together like I do with the Legend bench.
▪█─────█▪ Equipment Crew #58 ▪█─────█▪
-
07-23-2017, 03:11 AM #1047
-
07-23-2017, 05:11 AM #1048
Quick observations
Padding firmness- yes
one seat adjustment which leaves zero pad back - yes
Easy to move around - yes
Yes, backrest adjustments little hybrid - But pretty cool. The minimum angle would be around 40 degrees I think.
The back rest goes past the wheels
The handle does hit your legs as it at the same level as seat. The handle on Atlas flat bench does that once in a while.
Easy to dissemble and clean as well.
Not that heavy as compared to sone other commercial FI benches.
Once person cab easy grab it and carry it.
Piad $100 for brand new Atlas bench whereas paid $60 for used 5435.
Cons: Yes, back rest can be little wider at least by 1.5" to 2". Beyond that no issues. And also it came with colors I wanted. I am planning to make all my equipment white frame and black padding wherever I can. Only exception would be Rogue RH-2 and may be Atlas flat bench. But I think I can get the frame powder coated to flat white.
This is what it replaced . Cost wise 5435 is little less than 1/4th of the life fitness ($275 vs $60 excluding gas and tolls) one which I no longer own. The flipper has sold it for $75 profit at least that is what he told me.
After I made the deal with the seller , the ad was posted on the CL thread here and someone called and offered him $100. But luckily the seller kept his word. So I bought a Troy rotating supra bar from him as well. Just paid the asking price which was $40. He said new is like $169 or something . Didnot care.
Kind a felt obligated as he was trying to get rid off stuff and he kept his word. Gentle man above 60+. I was walking away with the bar and he goes oh yeah you need these clamps as well and now I end with spring clamps. Did not want to say I have zillion collars already as he wanted stuff out of which looked like his summer lake condo.
Pics of the bar
It does not fit on the Hammer strength preacher bench which is what I wanted to replace with Atlantis standing preacher curl.
Still made in Taiwan.
Also picked up Ivanko plates (Not as fancy as OMCs but OM's, 230lbs (2, 45's, 2 35's , 2 25's and 2, 10's) on the way for RH-2. That was little strange experience . So far I had bought 2 items from that town and both were little sketchy.
Pics of the plates . Need good cleaning and paint. Might make them look like OMC's ( at least the 45's, 35's and 25's ) since I don't have any
[M]===[6]▪ Mech6 Crew #35 ▪[M]===[6]
[]------[] York Barbell Club #80 (DD)[]-----[]
-
-
07-23-2017, 06:09 AM #1049
- Join Date: Apr 2007
- Location: Pennsylvania, United States
- Age: 50
- Posts: 2,541
- Rep Power: 12688
▪█─────█▪ Rogue Barbell Crew #27 ▪█─────█▪
▪█─────█▪ Mech6 Crew #26 ▪█─────█▪
▪█─────█▪ Equipment Crew #83 ▪█─────█▪
Haven't been able to "rep" many of you for a year or more...not for lack of trying.
Home Gym: https://forum.bodybuilding.com/showthread.php?t=175136471&p=1615740991&viewfull=1#post1615740991
-
07-23-2017, 09:51 AM #1050
- Join Date: Aug 2010
- Location: Columbus, Ohio, United States
- Posts: 8,954
- Rep Power: 108590
Anyone that's been considering the Rogue Boneyard Ohio Deadlift Bar, just wanted to check in. Bought one ($210 shipped, which anyone that powerlifters knows is a steal for this type of bar) and spent five minutes trying to figure out what cosmetic blemish caused it to be a second. It looks like the end of the knurling is about 1/32" concave for about half the circumference of the bar, instead of being perfectly straight.
I'll take it. 11/10, would recommend.NOV || Ohio Chapter || Be more, have less.
Powered by Ben & Jerry's.
Similar Threads
-
*** Consider this an invitation....to the Gangsta Nation: Deux****
By KingOfChaos in forum Misc.Replies: 9092Last Post: 10-04-2009, 02:50 PM
Bookmarks