'Look What I Bought Today!' - Part Deux

[vsral]

http://imgur.com/a/hPUeH

I went for the bumpers (2 euro/kg, cheaper than used basic chinese bumpers go for), but I saw this nice Schnell Hantel powerlifting bar sitting in a corner. Got it for 120 euro. The other bar is an old Schnell weightlifting bar, for comparison.

[urbanlifter]

$65 a piece and 5 minutes from my house, added some key pieces of equipment to the lineup today! Nautilus (2nd Gen I think) Pullover, leg extension, hamstring Curl, and bicep Curl. All chain driven and they are in pretty good shape, should clean up nicely!

[Domicron]

$65 a piece and 5 minutes from my house, added some key pieces of equipment to the lineup today! Nautilus (2nd Gen I think) Pullover, leg extension, hamstring Curl, and bicep Curl. All chain driven and they are in pretty good shape, should clean up nicely!

$65 each? IH8U

[rlundregan]

$65 a piece and 5 minutes from my house, added some key pieces of equipment to the lineup today! Nautilus (2nd Gen I think) Pullover, leg extension, hamstring Curl, and bicep Curl. All chain driven and they are in pretty good shape, should clean up nicely!

I can't see the pics, but NICE SCORE!

[Nebamartinez]

$65 each? IH8U

Lol 😆

Wow 😳 I could only dream

[urbanlifter]

Haha, thanks Dom and gents! Damn photo bucket wants me to pay for them to host pictures now. Will have to find an alternative way to upload.

unnamed.jpg

unnamed (1).jpg

unnamed (2).jpg

Edit: DB, must have been just recently because I have never seen it do that before. When I logged in it wanted $39.99 a month to host pictures. GTFOH!!!

[dumb.bell]

Wonder when that started? They are the only hosting service I have ever used.

[gym62richard]

My new Legend 3133 rack finally arrived in the UK yesterday, I put it together today, here's a picture of it in the gym.

[Hallowedlunch]

Use Imgur. Its easy and still free.

[gym62richard]

Use Imgur. Its easy and still free.

Yes I agree, I've tried several of the photo hosting sites, Ingur is easy, reliable and of course it's still free.

[RestoringTally]

Yes I agree, I've tried several of the photo hosting sites, Ingur is easy, reliable and of course it's still free.

What is wrong with uploading pics directly to the forum? It is easy enough to upload them as attachments and display them with the img tags.

[indianbuckeye]

My new Legend 3133 rack finally arrived in the UK yesterday, I put it together today, here's a picture of it in the gym.

Sweet setup!

[dieselmike]

What is wrong with uploading pics directly to the forum? It is easy enough to upload them as attachments and display them with the img tags.

Nothing... This should be the preferred choice for everyone. A lot of firewalls walls block many of the image sharing site. Imgur is no exception. Maybe easier to use than photobucket, but that gets blocked too by some. Myself being one.

I wish everyone should just use the forum's upload feature.

[urbanlifter]

Alright, I think I'm back in the game with pictures after switching to Imgur! Got 3 of 4 of the new machines into the house, was able to remove the downstairs sliding doors and wheel them around with only taking the stacks off. The pullover is going to be a full breakdown tonight and reassemble in the house, just too big to drag it through the backyard by myself. All the pads were recently redone so they are off the machines for now, frames cleaned up nicely and spent the weekend scrubbing the plastic shells to the machines. Can't wait to get these set and in place so I can start using them, STOKED!!!!

Hamstring and Leg Extension



Bicep Machine will probably go off the the right of the rack



Pullover (embded picture from before)

[urbanlifter]

I wish everyone should just use the forum's upload feature.

Is this as quick and easy as getting an image code generated for you? I do alot of my posts by phone, it has always been nice to use the image site's app to upload and then copy\paste a link into the forum for pictures. That is until Photobucket decided to start charging...

[thejosef]

My new Legend 3133 rack finally arrived in the UK yesterday, I put it together today, here's a picture of it in the gym.

CONGRATS!! That looks killer!!!

[dieselmike]

Is this as quick and easy as getting an image code generated for you?

Not that it is hard by any means. But as easy? Unfortunately, no.... But at least it has the benefit that everyone can view it.

Lets put it this way. On a scale of 1 - 5 with 5 being the hardest. If you consider Imgur a 1, then the forum upload feature is a 2.

[matrix563]

finally got a platform for ~$50



https://www.vulcanstrength.com/Vulca.../volywpf-1.htm
gonna see whats the best wood to put in the middle. right now its 12 mats, 8x6.

also got this picked up for me by gene. thanks man!






top is all rubber, and 18 pounds roughly, 1 1/2 inch handle.

[sm1ke]

Pair of 45lb OMEZH for $80.

[ffrink]

Alright, I think I'm back in the game with pictures after switching to Imgur! Got 3 of 4 of the new machines into the house, was able to remove the downstairs sliding doors and wheel them around with only taking the stacks off. The pullover is going to be a full breakdown tonight and reassemble in the house, just too big to drag it through the backyard by myself. All the pads were recently redone so they are off the machines for now, frames cleaned up nicely and spent the weekend scrubbing the plastic shells to the machines. Can't wait to get these set and in place so I can start using them, STOKED!!!!

Hamstring and Leg Extension



Bicep Machine will probably go off the the right of the rack



Pullover (embded picture from before)

Pullovers are a pain to move. I think they still weight around 400lbs without the stack.

Great score. Sounds like you got the Nautilus workout of the day to boot!!

[Hardgains88]

Alright, I think I'm back in the game with pictures after switching to Imgur! Got 3 of 4 of the new machines into the house, was able to remove the downstairs sliding doors and wheel them around with only taking the stacks off. The pullover is going to be a full breakdown tonight and reassemble in the house, just too big to drag it through the backyard by myself. All the pads were recently redone so they are off the machines for now, frames cleaned up nicely and spent the weekend scrubbing the plastic shells to the machines. Can't wait to get these set and in place so I can start using them, STOKED!!!!

Hamstring and Leg Extension



Bicep Machine will probably go off the the right of the rack



Pullover (embded picture from before)

Yours are really good pieces. I think they are a luttle newer then my pieces i pucked up last year. These can all be converted tp pulley, needle bearings, and cable and as smooth as a brand new machine. Nothing wrong with the chains though, but your talking about $70-$100 ish per machine to have them as good as anything made today. consideribg how cheap you got them, your not possible going to into them for too much! I have come to really apreciate the older nautilus, hit me up if you want some part numbers or anything, enjoy.

[RestoringTally]

Picked up a second set of IronMaster 75s. My gym is at my office, but I keep dumbbells and a bench at home for weekend workouts. I don't use that many different size DBs during a workout, so it is nice to have a few adjustable sets.

The CL ad came out on Friday. $200 for the dumbbells and stand. I was hoping someone would pick them up because I did not want to make the 5 hour roundtrip drive out to the boonies. He still had them Monday, and I could not help myself. I contacted the seller. He was willing to drive a 1/2 hour for an extra $20. So, a 4 hour roundtrip drive for a $220 set of 75s with stand. Unfortunately, he had lost one 5 lb plate, so it is 70 and 75 lb dumbbells. A bonus is that the plates are the newer style.

[urbanlifter]

Yours are really good pieces. I think they are a luttle newer then my pieces i pucked up last year. These can all be converted tp pulley, needle bearings, and cable and as smooth as a brand new machine. Nothing wrong with the chains though, but your talking about $70-$100 ish per machine to have them as good as anything made today. consideribg how cheap you got them, your not possible going to into them for too much! I have come to really apreciate the older nautilus, hit me up if you want some part numbers or anything, enjoy.

Thanks HG, might take you up on that! I thought of you as I was putting the pullover together, I remebered you picked some up and did modifications. I actually like chain, gives it a unique feel and they are fairly smooth for being so old. I'm going to just set them up and beat the hell out of them, then maybe when I get bored I'll do a full refurb.

I was most excited to get the pullover, that's a movement I do weekly and the Next Generation Super seems to fit me pretty well.

[jimbuick]

Got this beast put together this past weekend. There is also a rogue westside bench and prowler hiding in there too, but I don't have the space for the bench yet.

http://i1036.photobucket.com/albums/...psbb69gu2e.jpg

[merl227]

@urbanlifter, awesome set up man.

[chadsalt]

Got this beast put together this past weekend. There is also a rogue westside bench and prowler hiding in there too, but I don't have the space for the bench yet.

http://i1036.photobucket.com/albums/...psbb69gu2e.jpg

Damn it son, you've got quite a gym going on at your place.

[jimbuick]

Damn it son, you've got quite a gym going on at your place.

Thanks, man. It has kind of exploded recently lol. I've got the main gym in the living room, machines in the shed, and now I've had to move a car out of the garage to fit that stuff.

I'm hoping to get it all moved into a warehouse space by the end of next year.

[RemainDieHard]

Just picked up this to downsize from a Powerlift cage. My gym space is fairly narrow and this saves me a lot of depth. It doesn't match the color scheme I'm working towards but it's not bad either. It has a little tighter spacing - 4" on the PL to now 3.5" on the HS. (omg how do I even lift without westside spacing???)

[urbanlifter]

Half rack crew checking on, NICE pickup RDH!!! Now you need to work on Mech to make you a custom drop in mono for that badboy

[murphyreedus]

Nice rack. Welcome to the Half Rack Crew.