York Barbell Club - Part II

[AttyGuy]

Found these... Worth anything?

https://ibb.co/FDnV1SN

Worth something.

[Northernmoris]

Worth something.

To someone, somewhere.

[Nreed16]

I have some old york USA olympic plates. I dont know what they are worth and was wondering if you could shine some light on them for me. I bought a bunch of them off of an older gentlemen who had kept them in his basement dry and safe for about 30-40 years. Please just let me know! Thank you! I attached a picture.

[BulkMore]

I have some old york USA olympic plates. I dont know what they are worth and was wondering if you could shine some light on them for me. I bought a bunch of them off of an older gentlemen who had kept them in his basement dry and safe for about 30-40 years. Please just let me know! Thank you! I attached a picture.

Who in their right mind would open a .docx attachment? Better yet, who in their right mind would post a .docx attachment? Did you eat lead chips as a kid?

[delcodash]

The 100's on the bar have the milling on the edges, outside the centers. If you can see the pattern. Guess it's a little hard to see in the picture but look closely.

Can confirm: These do exist. Guy in Lancaster, PA has at least one with milling visible in the picture and wants $300 per plate (has a total of 7 for sale).

[Sboarder1964]

Can confirm: These do exist. Guy in Lancaster, PA has at least one with milling visible in the picture and wants $300 per plate (has a total of 7 for sale).

Holy crap, that is a much better picture!

[Sboarder1964]

Holy crap, that is a much better picture!

Found another pic, milled center on 100 lb bored out standard plates.

[AttyGuy]

Can confirm: These do exist. Guy in Lancaster, PA has at least one with milling visible in the picture and wants $300 per plate (has a total of 7 for sale).

Of course they exist!

[Sboarder1964]

Looks like unmarked (1940's) change plates and split sleeve bar for sale in Missouri, but it could just be a bad photo and they're actually milled (5s, 10s, 25s).

https://loz.craigslist.org/spo/d/cam...276570731.html

[Wahama90]

I didn't have a single vintage York dumbbell until 3 1/2 weeks ago. I responded to a month old post on Offerup back in December and didn't expect a response. The seller unexpectedly sent me a message in mid February asking if I was still interested. I ended up getting 1220 lbs. of dumbbells for $35. About 750 lbs were vintage York's and I was hooked. I've since added to the collection through a bit of searching marketplace, and some luck.
I'm trying to restore them when I get any free time, but I'm in the process of putting together a gym in the basement so it's been a slow process. Hopefully I'll learn a lot by reading through this board.

[IronJim835]

I didn't have a single vintage York dumbbell until 3 1/2 weeks ago. I responded to a month old post on Offerup back in December and didn't expect a response. The seller unexpectedly sent me a message in mid February asking if I was still interested. I ended up getting 1220 lbs. of dumbbells for $35. About 750 lbs were vintage York's and I was hooked. I've since added to the collection through a bit of searching marketplace, and some luck.
I'm trying to restore them when I get any free time, but I'm in the process of putting together a gym in the basement so it's been a slow process. Hopefully I'll learn a lot by reading through this board.

That was a super good deal! If you flipped some of those dumbbells you could speed up putting together that home gym. With not much out of your pocket cost to you. The vintage York dumbbells are fetching some high prices. Congratulations on your good luck!

[Wahama90]

That was a super good deal! If you flipped some of those dumbbells you could speed up putting together that home gym. With not much out of your pocket cost to you. The vintage York dumbbells are fetching some high prices. Congratulations on your good luck!

After my last two finds I now have an extra 75, 65, 40, and pairs of 35 and 30. I've been buying and flipping since early December and have spent on just that stuff $1735 and sold stuff for $1685, but I've got to keep a lot of the items that I really wanted and still have more to sell. Of that total $600 was for 625 lbs of dumbbells this week, and 575 of that were vintage York's.

[Sboarder1964]

If you flipped some of those dumbbells you could speed up putting together that home gym. Vintage York dumbbells are fetching some high prices.

Uh, what?

How you gonna come into the York Club thread and tell someone to flip their Yorks in exchange for other gym equipment? Go away.

[-=FLEX=-]

I have a York 32 mm Power Bar, part number 32120, in Black Oxide.

Also have a collection of fourteen 45 lb plates, of which four of them are classic deep dish York plates. Been thinking o sandblasting them and repainting them.

[EricAtl]

I have a York 32 mm Power Bar, part number 32120, in Black Oxide.

Also have a collection of fourteen 45 lb plates, of which four of them are classic deep dish York plates. Been thinking o sandblasting them and repainting them.

Who has info about these your plates, never seen them before.

[-=FLEX=-]

Who has info about these your plates, never seen them before.

I bought them almost 20 years ago from a local company that sells commercial gym equipment. A guy I knew from my gym worked there. I bought them used. My sister's ex-husband had them for a few years and he re-painted them at some point before I got them back.

I'm not sure they're anything special?

[radrd]

I have a York 32 mm Power Bar, part number 32120, in Black Oxide.

How do you like this bar? Just about every video I've seen you're using it, so I assume you like it quite a lot. I've always thought it looked like a good bar for bench press. What's the knurl like compared to your wife's Rogue bar? She has an Ohio Bar, right?

[-=FLEX=-]

How do you like this bar? Just about every video I've seen you're using it, so I assume you like it quite a lot. I've always thought it looked like a good bar for bench press. What's the knurl like compared to your wife's Rogue bar? She has an Ohio Bar, right?

Yes, Lisa has an Ohio bar, I rarely use it. I love the York 32mm bar for squats and bench.

There is literally Zero whip in this bar. Nothing. When I go to a commercial gym and use a generic bar for squats it starts flopping around on my back when I get heavy on squats. Fecks me up.

The whip is not an issue (unfortunately) for me on bench but I like the thicker 32mm bar more than the 28.5mm Rogue Ohio bar. That's just preference, but I have big mitts.

The knurling is not crazy aggressive. It's just ok.

Only thing I don't like about it is the oddball weight of 52 lbs. But I use micro 1 lb plates on each side and my collars weigh 1 lb to get an even 55 lbs.

For deadlifts I have a Texas Deadlift bar. That is a whole different ball game.

[radrd]

Yes, Lisa has an Ohio bar, I rarely use it. I love the York 32mm bar for squats and bench.

There is literally Zero whip in this bar. Nothing. When I go to a commercial gym and use a generic bar for squats it starts flopping around on my back when I get heavy on squats. Fecks me up.

The whip is not an issue (unfortunately) for me on bench but I like the thicker 32mm bar more than the 28.5mm Rogue Ohio bar. That's just preference, but I have big mitts.

The knurling is not crazy aggressive. It's just ok.

Only thing I don't like about it is the oddball weight of 52 lbs. But I use micro 1 lb plates on each side and my collars weigh 1 lb to get an even 55 lbs.

For deadlifts I have a Texas Deadlift bar. That is a whole different ball game.

Thanks, I appreciate the info. I don't there's another bar out there like it at 32mm. Certainly very few. Might be one I'll pick up eventually.i like oxide bars quite a bit.