Rogue Barbell Club

[dragon360]

Not much myself and I think I've buried the photos somewhere in the Power rack thread but its down to a speed rope and an original Ohio bar (though looking at the Power version a bit). Oh and some floss straps.



Would #65 be available? ha

[dumb.bell]

Rogue Monster rack and bench here.

Like em or not, I thought this was pretty neat...... He doesn't really fit the mold for a crossfitter either.

I'm surprised he missed the lift. I guess he just hadn't practiced it enough (balance rather than strength seemed to be the issue).

I guess that just makes the original lift more impressive. Especially since the guy was a lot smaller.

[Domicron]

lol i have the gunrack, the lockjaws, and some chalk, lol..

i'll request a number once i have something substantial from them

maybe i should start a poverty home gym club...

[keyboardworkout]

Any interest in a stall mat club?

[morebarbell]

I don't own anything from Rogue but I gave bench his club number so does that make me Rogue Barbell Club #0??


...Any word on the stainless bar from Rogue?

[throwaway3441]

Huh. I thought I had one or two Rogue pieces but now that I think about it:

- Original Rogue bar. Poor thing got damaged by the humidity. Should look into restoring it.
- Bands.
- DoWins.
- Dog Sled v2 1.2.
- Loading Pin for my DIY lat pulldown.
- Monolift.
- Monster Bench with Thompson Fat Pad.
- Supernova v2.
- Various three ships three filler.

I think that's it. Edit: Games Box too.

[Bench905]

I don't own anything from Rogue but I gave bench his club number so does that make me Rogue Barbell Club #0??

...Any word on the stainless bar from Rogue?

I've seen two pictures on Instagram.

First...4 months ago...described as stainless steel.



Second...2 months ago...caption says "new barbell prototypes"

[Bench905]

Not much myself and I think I've buried the photos somewhere in the Power rack thread but its down to a speed rope and an original Ohio bar (though looking at the Power version a bit). Oh and some floss straps.



Would #65 be available? ha

#65!

Huh. I thought I had one or two Rogue pieces but now that I think about it:

#12!

[morebarbell]

I've seen two pictures on Instagram.

First...4 months ago...described as stainless steel.



Second...2 months ago...caption says "new barbell prototypes"

Looking forward to seeing what they come up with. I'm hoping for either a completely stainless version of the Ohio bar or Ohio power bar. It might be my first order from Rogue... and one of the very few store bought pieces in my gym.

[AttyGuy]

If I could have had a legend rack or such when I bought I may have gone that route...although I love my R3.

I am proud, brother.

But, seriously. Why not go with a rack from Mech, if in Canada?

[dumb.bell]

I e-mailed them the other day to see if they had a deadlift bar in the works, unfortunately they don't.

[845ToastT]

Guess I'll join. Gimme a number!

Can you please tell me where you got those orange safety bars at? That's a sick looking setup.

I have a Rogue r3 30" rack right now and tomorrow I get a black oxide Ohio bar. I can post pics when I get the bar tomorrow.

[Sdca7718]

Can you please tell me where you got those orange safety bars at? That's a sick looking setup.

I have a Rogue r3 30" rack right now and tomorrow I get a black oxide Ohio bar. I can post pics when I get the bar tomorrow.

He got them from Mech6.

I have a RML-390F
Monster bench
Ohio Power bar
Matador
Comp. rings
Monster bands
3 gun rack
Multigrip bar on Mech6 front porch
Horizontal plate storage

[ubernoob]

I used to own the original rogue power bar which I loved and now miss as the grip on the bar was the best (not too sharp or dull) and I didn't need to chalk. I also owned the original operator bar but sold it to buy an ivanko bar for the same price I sold my operator bar so I have no regrets.

[Vmango]

I am proud, brother.

But, seriously. Why not go with a rack from Mech, if in Canada?

If I needed a rack today I would without a doubt have Mech fabricate me a custom rack to my specs. I would also suggest that to anyone here (in Ontario or Quebec at least).

But back then Mech didn't exist on this board and the shipping costs on Legend, Elite, or some of the other cool rack makers in the U.S. was just too crazy to justify.

But yes, Mech was able to help me transform my R3 into a better (and cooler) rack. I still can't believe Rogue don't offer swing safeties for their infinity line. This annoys me.

[thejosef]

Thanks for the club #. Here's a couple photos of my current setup..

Here's some of my Rogue goodies:
Rogue R3 power rack
Rogue matador
Rogue X-43M (monkey bar attachment)
Rogue Flat bench
Rogue Castro Bar (updated version 2)
Rogue Ohio Power Bar (bare steel)
Rogue Stubby Axle
Rogue War Bar (lol)
Rogue 10KG bar
Rogue V2 Gun Rack
Rogue LB Comp bumpers (4) 45s, (2) 35s, (4) 25s
Rogue HG bumpers (4) 15s, (4) 10s
Rogue comp bumper plate cart
Rogue dip belt
Rogue wooden rings with comp straps
Rogue Games Box 20/24/30
Rogue AB-2 Abmat
Rogue Wrist Wraps
Rogue HG Collars
Rogue ProLoc collars
Rogue Kettlebells

[Bench905]

I e-mailed them the other day to see if they had a deadlift bar in the works, unfortunately they don't.

I could've sworn that they talked about it on a different forum (not Bill, someone else from Rogue) - maybe it never made it past the design stage. The market has to be relatively small. I think people gave their opinions like 27mm diameter, very aggressive knurling, etc.

I have a RML-390F

#13!

Thanks for the club #. Here's a couple photos of my current setup..

I've been thinking about the horizontal plate storage...the 2.0 version was in the closeout section for like only $15 or $20 off. Usually that means they are working on a new version (they closed out the DL jacks when they added UHMW, etc.). Looks like I snoozed though...can't find it in the closeout section anymore.

[dumb.bell]

I could've sworn that they talked about it on a different forum (not Bill, someone else from Rogue) - maybe it never made it past the design stage. The market has to be relatively small. I think people gave their opinions like 27mm diameter, very aggressive knurling, etc.

It was a pretty generic response, so maybe it is still in the works, just a ways away.

[dragon360]

Thanks for the number Bench!

[SmokinJoe87]

Looking forward to seeing what they come up with. I'm hoping for either a completely stainless version of the Ohio bar or Ohio power bar. It might be my first order from Rogue... and one of the very few store bought pieces in my gym.

A fully (raw) stainless OPB would be something I would definitely be interested in! Loved almost everything about the OBSX-29mm-RAW, but that price tag... I'd suspect the Rogue to be significantly cheaper.

I just scored a bunch of Rogue gear off CL from a recent CrossFit box fire sale also. All brand new:
RH-2I w/roller attachment also
2 dog sled 1.2's (or v2 or whatever they label them) with UHMW skids, and dragging harnesses
Gun rack v2
Double post storage attachment
Matador
Flat bench 2.0

All brand new for $600 including gas. First Rogue purchases outside of voodoo bands.

[morebarbell]

A fully (raw) stainless OPB would be something I would definitely be interested in! ...

You listening, Bill??

[1651Naismith]

You listening, Bill??

How about just getting some OHPs in stock? Seems like they've been out of stock for 4-6 weeks now.

[akala1]

This thread is just making me want to order the RML-390F rack even more than I already did. I just need to save up a little more cash and I should be able to buy in about a month..... But it's just so damn beautiful, you know?

[thejosef]

I've been thinking about the horizontal plate storage...the 2.0 version was in the closeout section for like only $15 or $20 off. Usually that means they are working on a new version (they closed out the DL jacks when they added UHMW, etc.). Looks like I snoozed though...can't find it in the closeout section anymore.

The new versions are pretty nice. I sold my original one on CL to upgrade to the newer comp one. The handle doesn't stick way out anymore and you can buy whichever one is better suited to the weights you own. They have one for thicker hi temp type plates or one for comp plates (that's the one I have.. pictured above). The comp version fits my weights better so there's basically no wasted space. Space is at a premium in my gym so it worked out nicely for me.

[JoeCdn]

Count me in.

Rack: Rogue RML 390F w/ Matador and Landmine
Bar: Rogue Beater
Bench: Rogue Flat 2.0 Bench

[Robfitx]

RML 390F
Matador
Paralettes
Rings/straps/hanger
Bumper plates

[Bench905]

Count me in.

Rack: Rogue RML 390F w/ Matador and Landmine
Bar: Rogue Beater
Bench: Rogue Flat 2.0 Bench

#14!

RML 390F
Matador
Paralettes
Rings/straps/hanger
Bumper plates

#15!

||---|| Rogue Barbell Club ||---||

#1 - Bench905
#2 - VMango
#3 - rlundregan
#4 - RESERVED
#5 - irongrandpa
#6 - swimmer32
#7 - thejosef
#8 - snova031
#9 - smokinHawk
#10 - rpark
#11 - Stasher1
#12 - throwaway3441
#13 - Sdca7718
#14 - JoeCdn
#15 - Robfitx
#65 - dragon360

[whitessp]

In for Rogue Whore... I mean Barbell Club

Rogue R3-BT 30" depth
Rogue Ohio 1.2 Bar
Rogue Flat Bench 1.0
Rogue S-25 Fat Boy Sled
Rogue HG Collars
Rogue Monolift attachment

[smokinHawk]

In for Rogue Whore... I mean Barbell Club

Rogue R3-BT 30" depth
Rogue Ohio 1.2 Bar
Rogue Flat Bench 1.0
Rogue S-25 Fat Boy Sled
Rogue HG Collars
Rogue Monolift attachment

you are the first I have seen a picture of them taking off the back stop bolts on the monolift. do you like the free swing, or to swing it back more?

[Mech6]

wtf? Does the infinity version of rogue monolift have a backplate wider than 2"? Seems to stick out from the sides on previous photo.