The Official Craigslist Thread (Round 3)

[irongrandpa]

There is a Yukon HLS2000 Leg press/hack squat machine for 600.00 locally... Decent deal? ive been looking at the promaxima version new...

I haven't been very impressed with Yukon equipment. But if I were to buy it, I wouldn't pay more than $200 - $300.

[dumb.bell]

There is a Yukon HLS2000 Leg press/hack squat machine for 600.00 locally... Decent deal? ive been looking at the promaxima version new...

I'm not a fan of the dual machines, especially if they don't use linear bearings (that one looks like it uses wheels).

[p0opstlnksal0t]

I have pretty limited space. I've never used these dual machines but it would be impossible to fit a hack Squat and a leg press in the garage. There is a f660 posted a page ago for 900.00 it's a few hours drive and dirty as ****. I did look at the promaxima one when I went to order my rack. It was quite nice and priced around 1500 new. I think it's a PL-156









Has this already been posted? Is anyone traveling from Binghamton NY to Houston TX with a Semi Truck anytime soon? http://binghamton.craigslist.org/for/4448957391.html

Rae Crowther Power Rack - New $3900.00 Sell for $1500.00
Ivanko Weights - New $2000.00 Sell for $1000.00
90lb Powerblock with stand $ New $924.00 Sell for $450.00
125lb Power block with stand New $1125.00 Sell for $595.00
Kettelbell - New $150 Sell for $75.00
Bench - New $850.00 Sell for $400.00
Bars - $100.00
Misc bands

Basically Brand NEW.
Perfect for Professional Gym or Commercial or Home use.

Make an offer. All needs to go.

[Silentpoet]

I don't know about the bar, but those are nice Hampton plates. They do have a wide flange - lots of room for gripping.

Mine are also fairly accurate. I have 4 of the 45s, lightest one is 44.5, one is 45.5 the other 2 are 46 pounds. One of the 100s is 98.5 and the other is 103. I think those are what they were when I weighed them a couple of months back.

[MattyJ1s]

I have pretty limited space. I've never used these dual machines but it would be impossible to fit a hack Squat and a leg press in the garage. There is a f660 posted a page ago for 900.00 it's a few hours drive and dirty as ****. I did look at the promaxima one when I went to order my rack. It was quite nice and priced around 1500 new. I think it's a PL-156









Has this already been posted? Is anyone traveling from Binghamton NY to Houston TX with a Semi Truck anytime soon? http://binghamton.craigslist.org/for/4448957391.html

Holy crap, I live in Binghamton...How did I not see this.

[swimmer32]

Has this already been posted? Is anyone traveling from Binghamton NY to Houston TX with a Semi Truck anytime soon? http://binghamton.craigslist.org/for/4448957391.html

Very nice! I would be sleeping on the couch for a long, long time if that was in my area. The black and red even matches my workout room, like it was meant to be. ha

[ajsat23]

There is a Yukon HLS2000 Leg press/hack squat machine for 600.00 locally... Decent deal? ive been looking at the promaxima version new...

Have you seen this, its in austin but maybe worth the drive.
http://austin.craigslist.org/spo/4469252072.html



ITs $400 for this and some other stuff. You can flip the other stuff and end up with this cybex leg press for fairly cheap.

[p0opstlnksal0t]

Not too bad, I am looking for a combo hack squat and leg press though. There is a F660 in Dallas for 900 but after spending the cash renting a uhaul and my own time and gas I could have a new Pro Maxima one for a couple hundred more. I really dont want to spend that much for a non commercial unit that looks dirty and dingy enough to hypothetically assume it was recently shat out by a walrus. Who else besides promaxima make a decent commercial hip and leg sled?

Have you seen this, its in austin but maybe worth the drive.
http://austin.craigslist.org/spo/4469252072.html



ITs $400 for this and some other stuff. You can flip the other stuff and end up with this cybex leg press for fairly cheap.

[irongrandpa]

Legend Fitness has a leg press / hack squat machine, it uses linear bearings, (not wheels), it's model no. 3224.

[p0opstlnksal0t]

Nice!

Legend Fitness has a leg press / hack squat machine, it uses linear bearings, (not wheels), it's model no. 3224.

Can anyone ID this leg press / hack squat?

[deadwoodgregg]

Holy crap, I live in Binghamton...How did I not see this.

We will be expecting your review of that equipment after you pick it up.

Nice find and share Poops!

[MattyJ1s]

We will be expecting your review of that equipment after you pick it up.

Nice find and share Poops!

I would probably buy some of it....if I wasnt moving to Charlotte next month :-(

[judgecrandall]

share Poops!

[p0opstlnksal0t]

We will be expecting your review of that equipment after you pick it up.

Nice find and share Poops!

If I had a way to get it down to houston affordably I would buy it all right now

[ajsat23]

If I had a way to get it down to houston affordably I would buy it all right now

Im guessing someone already got it since the posting has been removed. Hope it was someone here, that was a sweet set.

[p0opstlnksal0t]

Im guessing someone already got it since the posting has been removed. Hope it was someone here, that was a sweet set.

someone got a sweet setup!

[59phinz]

I love the look of these custom Virginia Tech Yorks:
http://roanoke.craigslist.org/sgd/4457210016.html
If I was closer and/or a VT fan, I'd be all over them.

[Silentpoet]

I love the look of these custom Virginia Tech Yorks:
http://roanoke.craigslist.org/sgd/4457210016.html
If I was closer and/or a VT fan, I'd be all over them.

Those are also on eBay. They also have a smaller auction of, I think, 2 45s and 2 35s or some odd assortment like that.

[doaragon]

I know that there have been quite a few people on here recently looking for benches. Anyone in the Phoenix area might want to check this out.

Ironmaster Super Bench - $150
phoenix.craigslist.org/nph/spo/4471449040.html

[gene19728]

http://phoenix.craigslist.org/cph/spo/4472664805.html

Cool generic deep dish plates in Phoenix, would look sharp repainted.

[morebarbell]

http://phoenix.craigslist.org/cph/spo/4472664805.html

Cool generic deep dish plates in Phoenix, would look sharp repainted.

Very common Chinese made plates of low quality. The two in the front have been spray painted grey. They are the low end from about 6 or so years ago but some stores still sell similar plates in 300 lb sets for $200. 35 lb plates are a difficult sell. The ad says "35 pounders" but the photo seems to be of 25s.

[morebarbell]

Iamdisappoint.jpg

Holy crap, I live in Binghamton...How did I not see this.

I would probably buy some of it....if I wasnt moving to Charlotte next month :-(

Relisted: http://binghamton.craigslist.org/for/4473366620.html !!!!!!!!!!

Im guessing someone already got it since the posting has been removed. Hope it was someone here, that was a sweet set.

I have pretty limited space. I've never used these dual machines but it would be impossible to fit a hack Squat and a leg press in the garage. There is a f660 posted a page ago for 900.00 it's a few hours drive and dirty as ****. I did look at the promaxima one when I went to order my rack. It was quite nice and priced around 1500 new. I think it's a PL-156









Has this already been posted? Is anyone traveling from Binghamton NY to Houston TX with a Semi Truck anytime soon? http://binghamton.craigslist.org/for/4448957391.html

[aclockworkoi]

Iamdisappoint.jpg





Relisted: http://binghamton.craigslist.org/for/4473366620.html !!!!!!!!!!

Still nice equipment, would have been nice to see someone who was going to use it get the original deal though.

Don't get me wrong, I don't blame the flipper - it's how we roll

[morebarbell]

Still nice equipment, would have been nice to see someone who was going to use it get the original deal though.

Don't get me wrong, I don't blame the flipper - it's how we roll

Are the prices different? I thought it was the same guy relisting but I didn't pay close attention since it's a loooong haul from my location. I was teasing MattyJ1s about being disappointed. He could strap that stuff to the top of his car when he moves.

[aclockworkoi]

Are the prices different? I thought it was the same guy relisting but I didn't pay close attention since it's a loooong haul from my location. I was teasing MattyJ1s about being disappointed. He could strap that stuff to the top of his car when he moves.

lol I didn't look I just assumed. That's what I get. Still looks like a great deal!

[Northernmoris]

Are the prices different? I thought it was the same guy relisting but I didn't pay close attention since it's a loooong haul from my location. I was teasing MattyJ1s about being disappointed. He could strap that stuff to the top of his car when he moves.

I believe that's the same prices.

[deadwoodgregg]

I believe that's the same prices.

That is within your range Mr. Mortis and yes, those are the same prices.

[p0opstlnksal0t]

Still nice equipment, would have been nice to see someone who was going to use it get the original deal though.

Don't get me wrong, I don't blame the flipper - it's how we roll

That is the original deal relisted. The prices have not gone up. It's still a hell of a deal

[Northernmoris]

That is within your range Mr. Mortis and yes, those are the same prices.

Ad is deleted.

[Sazafraz]

Hey guys, I am trying to sell this Northern Lights bench press and EZ curl bar. How much would you say it's worth? Is $250 too much?

Thanks

photo 2(7).JPG