'Look what I bought today!'.

[Hardgains88]

Whatever they are , standard ivankos I think, you got an incredible deal. I picked up 2 25s recently and paid .75 per. Need more, for less.

Just unloaded about half of them. I'll take better pics tomorrow but comparing to standard generic plates they are about 30% deeper rimmed. I don't know if there are more then one basic Ivanko plate, so that may be there standard depth. I am so excited to finally have some quality plates. I never find deals like these!

[TipsyBanker]

Just unloaded about half of them. I'll take better pics tomorrow but comparing to standard generic plates they are about 30% deeper rimmed. I don't know if there are more then one basic Ivanko plate, so that may be there standard depth. I am so excited to finally have some quality plates. I never find deals like these!

very nice deal. Looks like these: http://www.ivankobarbell.com/products/om_series/ I am slowly putting together my own collection of OM plates

[dieselmike]

Hardgains. Post them in the Ivanko Thread. Request a crew #. I think morebarbell in charge.
Looks like original paint. Classic OM. Back of plate should say "Ivanko Barbell Compnay M series" around the hole. Prob not American made. If any stickers left on them it will say Taiwan. Great plates. Never was milled however machined on all sides including hole. Accurate as hell and tight hole tolerance. Congrats.

[MonkeyT]

Added some Eleiko. Couple pairs of Friction Grip and 2 pairs of 10kg. The friction grip are great and they work really nicely with my Eleiko Training Bar - they do work on my York Split Sleeve Bar but not so consistent in sliding on/off.

[Deep-Voiced-One]

Wanted a matching set of quality plates. Lucked out tonight and picked up about 1000 pounds of Ivanko (deep dish I think) plates. The paint is a bit rough but no rust! I was so excited I haven't even unloaded them but had to post. My back seat is loaded with more plates but I only took a pic of the rear hatch load. I got apron. 10 x 45 12x25 14 x 10 12x5 and 8x2.5! Time to scout the Ivanko thread and find out more about these. They do not appear to be milled but look to be hi quality castings. Anyone know if they are American made? Are they deep Dishes? I got the whole lot for $320! I grabbed everything they had at that price. I couldn't even find generic crap in CT for .50 a pound so Ivanko plates at about .33 seemed a steel!!!!!!
Will post up more pics later!

Wow you hit the jackpot with those Ivankos!!! Congrats, I'm from CT too so I know what you're talking about. Did you actually luck out by getting those in CT, or did you drive to another state to get that deal?

[haku123]

posted this in the york thread, but figured i'd cross post here as well.

grabbed these the other day, my first york DDs, it's a pair of everything except the 25s, just didn't take pictures of it all

[Hardgains88]

Wow you hit the jackpot with those Ivankos!!! Congrats, I'm from CT too so I know what you're talking about. Did you actually luck out by getting those in CT, or did you drive to another state to get that deal?

Deep voiced one, they were in Enfield and I live in Berlin! It is hard finding commercial stuff here at a good price. They were at a planet fitness I believe, I actually don't remember exactly. Been so long since I have been in regular gyms I don't remember what's what! It was a foo foo gym though, very little free weights and rows of cardio and machines... Not a rack in sight

[MonkeyT]

I´d so like a few pairs of these. Excellent haul.

[irongrandpa]

Wanted a matching set of quality plates. Lucked out tonight and picked up about 1000 pounds of Ivanko (deep dish I think) plates. The paint is a bit rough but no rust! I was so excited I haven't even unloaded them but had to post. My back seat is loaded with more plates but I only took a pic of the rear hatch load. I got apron. 10 x 45 12x25 14 x 10 12x5 and 8x2.5! Time to scout the Ivanko thread and find out more about these. They do not appear to be milled but look to be hi quality castings. Anyone know if they are American made? Are they deep Dishes? I got the whole lot for $320! I grabbed everything they had at that price. I couldn't even find generic crap in CT for .50 a pound so Ivanko plates at about .33 seemed a steel!!!!!!
Will post up more pics later!

Great buy! Ivanko's never are available near my area either. Every Ivanko I have has been bought on vacation trips.

[urbanlifter]

Earlier this week I got on and priced out my rack for when I move into my new home, I have been eyeballing the Bodycraft F430 and prepared myself mentally to pay FULL price. For no reason I turned my on my phone before bed and pulled up the CL app to scroll thru the sporting section. This rack is in brand new condition, and the bench could have a sticker thrown on it and put back in the store. Very happy with this pickup, this purchase should set me up with more room in the budget for some revolvers or possibly adding the crossover attachment right away!

Bodycraft F430, lat pulldown attachment, extra j-hooks, and dip handles.

Bodycraft F320 (Newer version)

[Arex99]

Earlier this week I got on and priced out my rack for when I move into my new home, I have been eyeballing the Bodycraft F430 and prepared myself mentally to pay FULL price. For no reason I turned my on my phone before bed and pulled up the CL app to scroll thru the sporting section. This rack is in brand new condition, and the bench could have a sticker thrown on it and put back in the store. Very happy with this pickup, this purchase should set me up with more room in the budget for some revolvers or possibly adding the crossover attachment right away!

Bodycraft F430, lat pulldown attachment, extra j-hooks, and dip handles.

Bodycraft F320 (Newer version)

Nothing like a bit of good luck. Congrats! The bench does look mint.

[dieselmike]

[matrix563]

got these for $200. almost enough plates to make 4 sets.





my lil bro's setup. i sold him the concept 2 model D rower for $80 (what i paid for it) and the atlantis bench i had previously posted here. also sold him the floor plate trees


my lil bro's setup.

[Arex99]

[QUOTE=matrix563;1399778133]got these for $200. almost enough plates to make 4 sets.



Nice...You always seem to find good deals. haha

[crutoi]

you're not the seller from Freehold are you?? that's from his posting...

[dieselmike]

I bought that this weekend. That's why I posted it in this "Look what I bought Today" thread. I was the buyer. I always seem to be the buyer. I leave the selling up to you expert flippers.

[MonkeyT]

you're not the seller from Freehold are you?? that's from his posting...

I've got tunnel vision and all I saw were the blue plates on the left anyway. lol

[MonkeyT]

got these for $200. almost enough plates to make 4 sets.


my lil bro's setup.

Real nice!! Stick some jerk blocks in there and it´s got the perfect equipment setup imo.

I´d love to be able to get a Concept rower in, and the Roman chair too, I only just manage to get a bike in... And that´s a squeeze.

Excellent training space!

[matrix563]

These were $160 2 months ago. Today they were $85

[C123C]

Added a 47" Bodysolid EZ-Curl bar to my setup. For whatever reason straight bar triceps extensions were aggravating the inner head of my left arm so figured this will take some pressure off and not a bad thing to have.

I really wanted something rackable but this is for one exercise mostly (might use it for pullovers too) so hard to rationalize the awesome Ivanko options out there.

Came with the collars. Pretty decent overall and for the $50 price with shipping it works fine for me. Went with the black for no real reason.

Will see use two sessions from now as I fell behind this week and had to pull an all nighter.

EDIT - Not sure how to embed an image hosted locally. If anyone has a hint I'm open to it. PERFECT - THANKS Monkey T!

[MonkeyT]

Embedded.



Add the following tags around the image location (without the "")
""[IMG]Image Location........[/IMG]""

Added a 47" Bodysolid EZ-Curl bar to my setup. For whatever reason straight bar triceps extensions were aggravating the inner head of my left arm so figured this will take some pressure off and not a bad thing to have.

I really wanted something rackable but this is for one exercise mostly (might use it for pullovers too) so hard to rationalize the awesome Ivanko options out there.

Came with the collars. Pretty decent overall and for the $50 price with shipping it works fine for me. Went with the black for no real reason.

Will see use two sessions from now as I fell behind this week and had to pull an all nighter.

EDIT - Not sure how to embed an image hosted locally. If anyone has a hint I'm open to it.

[canuckmike]

Powertec compact leg sled.

[Stasher1]

I like the looks of that ^^.

I don't have a lot of floor space left, but I'd be willing to move/get rid of a piece or two to make room for something like that. Never seen one for sale in this area, though.

[C123C]

Looks a lot like a 1990s era hack squat machine that was always paired with a leg press. Interesting.

[Cleveland33]

Picked these E-90 Powerblocks up on Saturday with the stand.

$296 (with tax) at PIAS. Seems like an ok deal.

The add-ons are in the handles. Probably try and use them for a month or so, if I like/use them I'll hang on, otherwise I'll flip them.

Thanks to Bench and RTHawker for help ID'ing them (no experience with PBs)



Powerblocks.jpg

[irongrandpa]

I recently bought a Magnum Pro Multi rack and I'm extremely happy with it. However, enjoyment went over the top with the addition of a pair of Mech6 monolift hooks.

[cwcmac]

I recently bought a Magnum Pro Multi rack and I'm extremely happy with it. However, enjoyment went over the top with the addition of a pair of Mech6 monolift hooks.

I don't want to freak you out but if you look closely, there's a bald dude with a camera hanging out in your garage

[dumb.bell]

I recently bought a Magnum Pro Multi rack and I'm extremely happy with it. However, enjoyment went over the top with the addition of a pair of Mech6 monolift hooks.

Congratulations!!

[Stasher1]

I don't want to freak you out but if you look closely, there's a bald dude with a camera hanging out in your garage

Shhhhhhhh.....

[Cleveland33]

Shhhhhhhh.....

stop creepin' in other dudes' garages