Printable View
[QUOTE=Notfadeaway90;1535593861]Hi I've been trying to find a good deal on some plates. Anybody know what brand these are?
h ttps://phoenix.craigslist.org/nph/spo/d/set-of-2-45-and-2-35-deep/6393649549.html[/QUOTE]
Well if you want cheap you can't be picky on the brand. Those plates are quite common but I've never heard where they were originally sold at. Probably a big box store. Pretty run of the mill.
[QUOTE=RemainDieHard;1535599841]Well if you want cheap you can't be picky on the brand. Those plates are quite common but I've never heard where they were originally sold at. Probably a big box store. Pretty run of the mill.[/QUOTE]
Thanks, yeah I was more so wondering if they were a good buy, I found some others of the same make for below 50¢/lb. Any worries on those scratching a nice bar and/or weight tolerances?
[QUOTE=Notfadeaway90;1535600581]Thanks, yeah I was more so wondering if they were a good buy, I found some others of the same make for below 50¢/lb. Any worries on those scratching a nice bar and/or weight tolerances?[/QUOTE]
IMO 40 cents / pound is a decent price for used plates. You can always make an offer for less, say $50 and see what happens.
Weight tolerances will of course vary a bit as these seem to be no-name/generic/box-store plates. As long as both plates in the pair are with a pound of each other, I wouldn't worry much about it - it is what it is. If you want accuracy and tight tolerance, they you have to pay for it. I have three pairs of Weider 45 lb grip plates from Sears & Walmart. Cheap as they come. And they weighed between 43 and 45 pounds on my luggage scale. I matched up pairs with similar wts and they are good to go.
When you get the weights, inspect the holes with you fingers. If you find any burrs or slag deposits, knock them out with a screwdriver or something. Then take a file or sandpaper and go to town - smooth the inner surface of the holes till you are happy. And no more worries about scratching your nice bar.
[QUOTE=arkaa;1535616141]IMO 40 cents / pound is a decent price for used plates. You can always make an offer for less, say $50 and see what happens.
Weight tolerances will of course vary a bit as these seem to be no-name/generic/box-store plates. As long as both plates in the pair are with a pound of each other, I wouldn't worry much about it - it is what it is. If you want accuracy and tight tolerance, they you have to pay for it. I have three pairs of Weider 45 lb grip plates from Sears & Walmart. Cheap as they come. And they weighed between 43 and 45 pounds on my luggage scale. I matched up pairs with similar wts and they are good to go.
When you get the weights, inspect the holes with you fingers. If you find any burrs or slag deposits, knock them out with a screwdriver or something. Then take a file or sandpaper and go to town - smooth the inner surface of the holes till you are happy. And no more worries about scratching your nice bar.[/QUOTE]
Good stuff, thanks!
[QUOTE=Notfadeaway90;1535624341]Good stuff, thanks![/QUOTE]
Also, in case you are interested, Sears has the Weider 300-lb Olympic set for $180.
[url]http://www.sears.com/weider-300lb-weight-set/p-00615814000P[/url]
[QUOTE=deadwoodgregg;1535620801]$65...........for the bench, not the top soil.
[url]https://boston.craigslist.org/gbs/spo/d/awesome-hoist-workout-bench-7/6399082293.html[/url]
$300 Cybex bench
This guy has additional gear for sale.
[url]https://boston.craigslist.org/nos/spo/d/cybex-weight-bench-5435/6365358257.html[/url]
$1lb very fair price for pair of Intek urethane hundos in nice condition.
[url]https://worcester.craigslist.org/spo/d/100lb-plates/6378732044.html[/url][/QUOTE]
He is a "pro" reseller/flipper . 5435 has been there a while
[url]https://boston.craigslist.org/nos/spo/d/power-rack/6370688169.html[/url]
If you have ceiling height , this is a good rack. Looks like welded sides.
Price got dropped..
I've bought from him before..He is a good guy..I got some Hampton Urethane plates from him and he calls me whenever he gets more to give me first shot before he lists them. Manage to complete an entire set that way and he gives me a good price.
He always has some good stuff
I called about the Hoist bench to see if price was for real ($65)..Person said someone was buying it for $150 unless I wanted to offer more..Sounds a little shady so I bailed out.
Whats a good price for U90s stage 1, large PB stand, PB sport bench in great condition? I want to pay half of retail which is $315. I feel like he won't take $315 though. He wants $475 and says retail was $736 but hes also including 5lb, 10lb, 15lb dumbbells and urethane straight bar that I don't want.
[img]https://i.imgur.com/hRl1wVF.jpg[/img]
[img]https://i.imgur.com/M6JrpTQ.jpg[/img]
[img]https://i.imgur.com/xv8O1Zy.jpg[/img]
[img]https://i.imgur.com/XKRjtir.jpg[/img]
[QUOTE=BmXr;1535760801]Whats a good price for U90s stage 1, large PB stand, PB sport bench in great condition? I want to pay half of retail which is $315. I feel like he won't take $315 though. He wants $475 and says retail was $736 but hes also including 5lb, 10lb, 15lb dumbbells and urethane straight bar that I don't want.
[img]https://i.imgur.com/hRl1wVF.jpg[/img]
[img]https://i.imgur.com/M6JrpTQ.jpg[/img]
[img]https://i.imgur.com/xv8O1Zy.jpg[/img]
[img]https://i.imgur.com/XKRjtir.jpg[/img][/QUOTE]
Ive seen them sold for $225-$300 around chicago...closer to $300 with the stand. You could pay his price, then sell the dumbbells and bar, which might get you around $100. Personally I'd sooner buy a new set for $379 just to avoid the hassle of doing that. some retailers (around here anyway) will take 10% off retail. any flat surface of the right height will work for powerblocks. if you are set on having the stand, your best deal is getting him as low as he'll go on the lot then sell what you dont want or see if he will take less and leave out the db's and bar.
Those Powerblock bars, IMO, are less than useless.
[QUOTE=dskoo65;1535763101]Ive seen them sold for $225-$300 around chicago...closer to $300 with the stand. You could pay his price, then sell the dumbbells and bar, which might get you around $100. Personally I'd sooner buy a new set for $379 just to avoid the hassle of doing that. some retailers (around here anyway) will take 10% off retail. any flat surface of the right height will work for powerblocks. if you are set on having the stand, your best deal is getting him as low as he'll go on the lot then sell what you dont want or see if he will take less and leave out the db's and bar.
Those Powerblock bars, IMO, are less than useless.[/QUOTE]
I actually didn't factor in sales tax so I don't mind offering $340. I am seeing most PBs but no U-90s sell around $200 in NY but I don't see any PBs in NJ where I am. If they sell PBs around you with stand around $300, I should offer like $375-400 to include the bench. I saw Dickssportinggoods had 15% off and free ship but with tax PBs came out to $272. Dicks doesn't sell Urethane models though. I only saw 2 websites selling U-90s for $379 but they charge shipping. They weren't offering any sales when I saw them. It doesn't look like that stand will fit the PBs when I upgrade them to more weight. I could live without the stand and I did see some better benches recommended here like Rep fitness and Rogue. However with the quality and amount of weight equipment I am seeing sold in NJ I don't think I will see U-90s or any good bench come up soon. Retail with tax for the straight bar and dumbbells is $203.
[QUOTE=BmXr;1535796961]I actually didn't factor in sales tax so I don't mind offering $340. I am seeing most PBs but no U-90s sell around $200 in NY but I don't see any PBs in NJ where I am. If they sell PBs around you with stand around $300, I should offer like $375-400 to include the bench. I saw Dickssportinggoods had 15% off and free ship but with tax PBs came out to $272. Dicks doesn't sell Urethane models though. I only saw 2 websites selling U-90s for $379 but they charge shipping. They weren't offering any sales when I saw them. It doesn't look like that stand will fit the PBs when I upgrade them to more weight. I could live without the stand and I did see some better benches recommended here like Rep fitness and Rogue. However with the quality and amount of weight equipment I am seeing sold in NJ I don't think I will see U-90s or any good bench come up soon. Retail with tax for the straight bar and dumbbells is $203.[/QUOTE]
This is How I look at it if I were to resell them
$299 for U-Powerblocks with stand (I easily get $250 for regular 5-45lbs with stand)
$100-$125 for bench
$30 (For Dumbbells at $0.50Lb)
$50 (BUT ONLY SOLD WITH THE DUMBBELLS)
If there's none in you're area and you want a pair. A premium on getting these should be factored in to you're mind versus what others say. $475 isn't bad, but $425-$450 is where I'd be. Obviously area matters in cheaper is better. Just my 2 cents.
[QUOTE=BmXr;1535796961]I actually didn't factor in sales tax so I don't mind offering $340. I am seeing most PBs but no U-90s sell around $200 in NY but I don't see any PBs in NJ where I am. If they sell PBs around you with stand around $300, I should offer like $375-400 to include the bench. I saw Dickssportinggoods had 15% off and free ship but with tax PBs came out to $272. Dicks doesn't sell Urethane models though. I only saw 2 websites selling U-90s for $379 but they charge shipping. They weren't offering any sales when I saw them. It doesn't look like that stand will fit the PBs when I upgrade them to more weight. I could live without the stand and I did see some better benches recommended here like Rep fitness and Rogue. However with the quality and amount of weight equipment I am seeing sold in NJ I don't think I will see U-90s or any good bench come up soon. Retail with tax for the straight bar and dumbbells is $203.[/QUOTE]
May want to check with PB; not sure if the warranty transfers from one private owner to another. one of my plates (Classic Elites) bent and they replaced it free of charge so their CS is good. Shouldn't have that issue with the urethanes but having the warranty is still noce.
[QUOTE=SomeIronBoy;1535806191]This is How I look at it if I were to resell them
$299 for U-Powerblocks with stand (I easily get $250 for regular 5-45lbs with stand)
$100-$125 for bench
$30 (For Dumbbells at $0.50Lb)
$50 (BUT ONLY SOLD WITH THE DUMBBELLS)
If there's none in you're area and you want a pair. A premium on getting these should be factored in to you're mind versus what others say. $475 isn't bad, but $425-$450 is where I'd be. Obviously area matters in cheaper is better. Just my 2 cents.[/QUOTE]
Yeah, this was being sold in philadelphia 82 miles from my house. I just didn't want to pay extra for those things I didn't want and have to bother with selling them. I checked the ad today and he deleted it, I guess someone bought it. I didn't post the link here because I didn't want anyone else seeing it and buying it. I wonder if someone here saw it and was able to get the listing using my post and jumped on it. The listing was up for 11 days before I posted it here.
[QUOTE=cwcmac;1535806851]May want to check with PB; not sure if the warranty transfers from one private owner to another. one of my plates (Classic Elites) bent and they replaced it free of charge so their CS is good. Shouldn't have that issue with the urethanes but having the warranty is still noce.[/QUOTE]
I checked that, unfortunely it doesn't transfer. That was one of the reason I posted here and considered buying brand new from Dicks with a 15% off sale but it was still too much and wasn't Urethane PBs.
[QUOTE=BmXr;1535807031]Yeah, this was being sold in philadelphia 82 miles from my house. I just didn't want to pay extra for those things I didn't want and have to bother with selling them. I checked the ad today and he deleted it, I guess someone bought it. I didn't post the link here because I didn't want anyone else seeing it and buying it. I wonder if someone here saw it and was able to get the listing using my post and jumped on it. The listing was up for 11 days before I posted it here.[/QUOTE]
In Philadelphia?
you have the all time king of the flippers plus all his copycats - it wasn't your post that brought it to anyone's attention.
[QUOTE=BmXr;1535807031]Yeah, this was being sold in philadelphia 82 miles from my house. I just didn't want to pay extra for those things I didn't want and have to bother with selling them. I checked the ad today and he deleted it, I guess someone bought it. I didn't post the link here because I didn't want anyone else seeing it and buying it. I wonder if someone here saw it and was able to get the listing using my post and jumped on it. The listing was up for 11 days before I posted it here.
I checked that, unfortunely it doesn't transfer. That was one of the reason I posted here and considered buying brand new from Dicks with a 15% off sale but it was still too much and wasn't Urethane PBs.[/QUOTE]
I don't think Dicks sells the versions that are expandable beyond 50. I'd avoid those unless you are just going with low weight options and something else for higher DB weights
[QUOTE=BmXr;1535796961]I actually didn't factor in sales tax so I don't mind offering $340. I am seeing most PBs but no U-90s sell around $200 in NY but I don't see any PBs in NJ where I am. If they sell PBs around you with stand around $300, I should offer like $375-400 to include the bench. I saw Dickssportinggoods had 15% off and free ship but with tax PBs came out to $272. Dicks doesn't sell Urethane models though. I only saw 2 websites selling U-90s for $379 but they charge shipping. They weren't offering any sales when I saw them. It doesn't look like that stand will fit the PBs when I upgrade them to more weight. I could live without the stand and I did see some better benches recommended here like Rep fitness and Rogue. However with the quality and amount of weight equipment I am seeing sold in NJ I don't think I will see U-90s or any good bench come up soon. Retail with tax for the straight bar and dumbbells is $203.[/QUOTE]
did you check other brick & mortar stores on the website that are near you? in most regions there are actual fitness stores that carry all the PB models.
[QUOTE=dskoo65;1535835931]did you check other brick & mortar stores on the website that are near you? in most regions there are actual fitness stores that carry all the PB models.[/QUOTE]
After I saw your post I looked for some. I found 2 that do sell them, they aren't close, 60+ miles away, but I can manage if its a good price. One website wouldn't load for me, so I don't know about that place and the couple others I found don't sell PBs. They don't list their prices on the website so I'd have to call or go there. The one website says closeout special on PB sport 5.0 and 9.0.
[QUOTE=cwcmac;1535808541]I don't think Dicks sells the versions that are expandable beyond 50. I'd avoid those unless you are just going with low weight options and something else for higher DB weights[/QUOTE]
Dicks sells elites, that are expandable to 90lbs. They just had a 25% off free ship for cyber monday but only on the sport model.
[QUOTE=Cleveland33;1535808531]In Philadelphia?
you have the all time king of the flippers plus all his copycats - it wasn't your post that brought it to anyone's attention.[/QUOTE]
So he purposely put that listing up to drive sellers PB prices down to flip them?
Sorry I can't embed pictures yet. What would you all pay for this double cage? It is a used BFS. I'm looking for a good cage, but don't want to pay too much.
[QUOTE=vobin;1535862411]Sorry I can't embed pictures yet. What would you all pay for this double cage? It is a used BFS. I'm looking for a good cage, but don't want to pay too much.[/QUOTE]
Well that set up it $4895, and it's 7 gauge. If youre just looking for a single rack I find that setup rather useless for a home user, TBH. I don't even know where I would price that for a home gym type rack. The rather 50% of new for used equipment I think doesn't really apply hear and would have to be way cheaper for 2 half racks in 1. Maybe 1000-1300? Idk
[QUOTE=SomeIronBoy;1535863061]Well that set up it $4895, and it's 7 gauge. If youre just looking for a single rack I find that setup rather useless for a home user, TBH. I don't even know where I would price that for a home gym type rack. The rather 50% of new for used equipment I think doesn't really apply hear and would have to be way cheaper for 2 half racks in 1. Maybe 1000-1300? Idk[/QUOTE]
Husband is 6'5" and I am 5'5', so thought the double would be a good idea since a regular cage is too short for him to do overhead lifting in? And we could work out together. However I am thrown by the 7 gauge, as in I have no idea what that means, how is it useless? I don't want useless. Thanks for the response. I did not think it was that costly to buy new.
Total noob here too, in case you hadn't surmised that yet. I noticed you said it is a half rack or two half racks in one. How is it not a full rack? Help me understand the difference please. I'm pretty sure I don't want a half rack.
Thanks for your help.
Edited to add. I see it does not have any safety catches, just the spotter arms on the one side. The other side just has jcups, so would be virtually useless for regular lifting I'm guessing. Is that what you are talking about? And I looked up 7 gauge.
[QUOTE=vobin;1535863701]Total noob here too, in case you hadn't surmised that yet. I noticed you said it is a half rack or two half racks in one. How is it not a full rack? Help me understand the difference please. I'm pretty sure I don't want a half rack.
Thanks for your help.
Edited to add. I see it does not have any safety catches, just the spotter arms on the one side. The other side just has jcups, so would be virtually useless for regular lifting I'm guessing. Is that what you are talking about? And I looked up 7 gauge.[/QUOTE]
If you have the room for a rack this size it's a good solid rack. 7 gauge refers to the metal thickness, 7 gauge being heavier. I would want the safety arms for both sides, if they aren't with the rack, you should be able to get some but factor that in as an additional expense. Pricing depends on how bad you want this particular rack. A couple of weeks ago there was a rack similar to this one made by Legend Fitness for sale in Columbus ( without the lifting platform) for $400, so if I wanted this one , I would pay up to about $700 max. and try for a lower price, this rack will be harder to sell than most because of the space it requires.
[QUOTE=BmXr;1535861701]So he purposely put that listing up to drive sellers PB prices down to flip them?[/QUOTE]
No, I am saying that Philadelphia is a very competitive market - possibly the most competitive in the country - posting about a listing in this thread didn't bring it to anyone's attention. If it was a good deal, you wouldn't have had time to think about it, let alone post about it.
The spotters for each side are shown in the pics, so if the price is right, you have the room for it, and can pick it up, go for it.
[QUOTE=Cleveland33;1535808531]In Philadelphia?
you have the all time king of the flippers plus all his copycats - it wasn't your post that brought it to anyone's attention.[/QUOTE]
I'm assuming you're talking about that jerkoff Jeff from "Fitness Equipment Empire"?
[QUOTE=DongCorleone;1535886331]I'm assuming you're talking about that jerkoff Jeff from "Fitness Equipment Empire".[/QUOTE]
You don't enjoy scrolling thru his same 20+ ads of gym equipment at super low prices.....
[QUOTE=DongCorleone;1535886331]I'm assuming you're talking about that jerkoff Jeff from "Fitness Equipment Empire"?[/QUOTE]
Uhh, no. He's not moving nearly as much gear as one of our members here, though he doesn't post frequently and rarely sells on CL.
[QUOTE=tical523;1535888401]You don't enjoy scrolling thru his same 20+ ads of gym equipment at super low prices.....[/QUOTE]
do you even know how to search, brah?
[QUOTE=Cleveland33;1535894081]do you even know how to search, brah?[/QUOTE]
Getting better but still learning the ropes.
[QUOTE=irongrandpa;1535879891]If you have the room for a rack this size it's a good solid rack. 7 gauge refers to the metal thickness, 7 gauge being heavier. I would want the safety arms for both sides, if they aren't with the rack, you should be able to get some but factor that in as an additional expense. Pricing depends on how bad you want this particular rack. A couple of weeks ago there was a rack similar to this one made by Legend Fitness for sale in Columbus ( without the lifting platform) for $400, so if I wanted this one , I would pay up to about $700 max. and try for a lower price, this rack will be harder to sell than most because of the space it requires.[/QUOTE]
Good information, thank you. I don't see how the safety arms would fit, I don't know much about racks, but I don't see how you would fit or adjust them, ie...I don't see any way to attach more. Can you explain what I don't know. I don't have to set up the lifting platform, is that correct? It won't affect the stability of it, that is just an extra right?
[QUOTE=Stasher1;1535883481]The spotters for each side are shown in the pics, so if the price is right, you have the room for it, and can pick it up, go for it.[/QUOTE]
Stasher, thanks for responding. Forgive my lack of knowledge on the subject, but I only see jcups on one side for storing a bar and front spotters on the other side for working out in front of the bar. Is that what you are talking about? Is there even enough room to lift inside this cage on either side if I wanted to or is it just built for lifting on the outside? Thanks for any information you can give me.
[QUOTE=vobin;1535862411]I'm looking for a good cage, but don't want to pay too much.[/QUOTE]Where are you located? I think this setup is a beauty. Nebula open top rack with plate storage, spotter stands, and bench for nine fiddy in Atlanta (Kennesaw).
[img]https://i0.wp.com/csmfitnessgeorgia.com/wp-content/uploads/2017/10/AtlantisOlympicAdjustableBench_57680.jpg[/img]
[QUOTE=vobin;1535926141]Good information, thank you. I don't see how the safety arms would fit, I don't know much about racks, but I don't see how you would fit or adjust them, ie...I don't see any way to attach more. Can you explain what I don't know. I don't have to set up the lifting platform, is that correct? It won't affect the stability of it, that is just an extra right?[/QUOTE]
After looking at the pictures again , the j-hooks and safeties are all accounted for , for both sides of the rack. This rack configuration is referred to as a double 1/2 rack. You lift on both sides on the outside of the uprights. Each side has adjustable j-hooks and adjustable safeties.
[QUOTE=deadwoodgregg;1535942081]Where are you located? I think this setup is a beauty. Nebula open top rack with plate storage, spotter stands, and bench for nine fiddy in Atlanta (Kennesaw).
[img]https://i0.wp.com/csmfitnessgeorgia.com/wp-content/uploads/2017/10/AtlantisOlympicAdjustableBench_57680.jpg[/img][/QUOTE]
That rack is a nice one. I have a Magnum multi rack that’s very similar except I have a top cross member with a pull up bar.
[QUOTE=irongrandpa;1535946751]After looking at the pictures again , the j-hooks and safeties are all accounted for , for both sides of the rack. This rack configuration is referred to as a double 1/2 rack. You lift on both sides on the outside of the uprights. Each side has adjustable j-hooks and adjustable safeties.[/QUOTE]
Ah, yes I see them now. Thank you. Is there anything this rack cannot do, that a full rack can?
[QUOTE=deadwoodgregg;1535942081]Where are you located? I think this setup is a beauty. Nebula open top rack with plate storage, spotter stands, and bench for nine fiddy in Atlanta (Kennesaw).][/QUOTE]
I'm in the southwest. Nice setup. There is a similar one I have seen for sale, but I know so little about racks, I don't know that I would prefer an open top.
[QUOTE=deadwoodgregg;1535942081]Where are you located? I think this setup is a beauty. Nebula open top rack with plate storage, spotter stands, and bench for nine fiddy in Atlanta (Kennesaw).
[img]https://i0.wp.com/csmfitnessgeorgia.com/wp-content/uploads/2017/10/AtlantisOlympicAdjustableBench_57680.jpg[/img][/QUOTE]
That's just like mine. It's a Nebula 6021 Phase rack and matching 6021-B bench.
Solid mofo and well worth the asking price, imo.
Not a bad deal
[url]https://providence.craigslist.org/sgd/d/legend-multi-functional-press/6387072732.html[/url]
[img]https://forum.bodybuilding.com/attachment.php?attachmentid=8798291&d=1512044889[/img]
[QUOTE=vhd16;1536093841]Not a bad deal
[url]https://providence.craigslist.org/sgd/d/legend-multi-functional-press/6387072732.html[/url]
[img]https://forum.bodybuilding.com/attachment.php?attachmentid=8798291&d=1512044889[/img][/QUOTE]
Agreed, especially if it includes both sets of bar hooks and spotters shown in the pic.
[QUOTE=Stasher1;1536095641]Agreed, especially if it includes both sets of bar hooks and spotters shown in the pic.[/QUOTE]
from personal experience welded racks are very hard to move becasue they only fit in garages or commercial gyms. only pickups or trailers can fit them in... i had an icarian that took forever to sell, and i only got around 150 for it in NJ...
[QUOTE=crutoi;1536110301]from personal experience welded racks are very hard to move becasue they only fit in garages or commercial gyms. only pickups or trailers can fit them in... i had an icarian that took forever to sell, and i only got around 150 for it in NJ...[/QUOTE]
Was the Icarian commerical? The height and weight of those can be a real pain and eliminate a lot of people from the market. The Legend sides aren't that tall or that heavy so they probably have more of a home gym appeal as opposed to a fully commerical rack.
[QUOTE=Stasher1;1536095641]Agreed, especially if it includes both sets of bar hooks and spotters shown in the pic.[/QUOTE]
And also these guys will discount the price from listed price may not be that much but at least $50 to $100. Bought my OBS-20kg from them. First SS barbell. Only thing is they will charge is you sales tax. So $50 discount got offset by the sales tax.
[url]https://phoenix.craigslist.org/evl/spo/d/cybex-commercial-grade/6416172616.html[/url]
Cybex commercial grade adjustable bench $120
[quote][img]https://images.craigslist.org/00303_eqi6HaIjuwf_1200x900.jpg[/img][/quote]
[url]https://detroit.craigslist.org/okl/spo/d/hammer-strength-full-90/6415548681.html[/url]
Hammer Strength full 90 degree incline workout bench - $200
[quote][img]https://images.craigslist.org/00p0p_5FUGyJ45fW9_1200x900.jpg[/img][/quote]
[QUOTE=jormone;1536812501][url]https://phoenix.craigslist.org/evl/spo/d/cybex-commercial-grade/6416172616.html[/url]
Cybex commercial grade adjustable bench $120
[/QUOTE]
This doesnt make sense...these benches go for $400+ according to members. Must be at typo. Should be $420.
[QUOTE=BulkMore;1536812891]This doesnt make sense...these benches go for $400+ according to members. Must be at typo. Should be $420.[/QUOTE]
because they would never EVER go for more than you have sold them for
[QUOTE=Cleveland33;1536813211]because they would never EVER go for more than you have sold them for[/QUOTE]
I never sold one n00b. 7 years bad luck if you ever sell one of these bad boys.
[QUOTE=jormone;1536812501][url]https://phoenix.craigslist.org/evl/spo/d/cybex-commercial-grade/6416172616.html[/url]
Cybex commercial grade adjustable bench $120
[url]https://detroit.craigslist.org/okl/spo/d/hammer-strength-full-90/6415548681.html[/url]
Hammer Strength full 90 degree incline workout bench - $200[/QUOTE]
I called about the Hammer Strength about an hour after it was up and he already had someone coming to pick it up this afternoon. Would have loved to have it but somehow it didn't come through in my CL automated e-mails and I was a little late on the call.
Crazy thing is he's selling other stuff and it is all reasonably priced or over priced but he's selling this bench cheap.
[QUOTE=BulkMore;1536814011]I never sold one n00b. 7 years bad luck if you ever sell one of these bad boys.[/QUOTE]
So what's your excuse if you never sold one?