The Official Craigslist Thread (Round 4)

^LOL

[QUOTE=cwcmac;1613327141]I suspect Don's is 5'10" uprights, just looks bigger since it is in a basement that likely has a lower ceiling.[/QUOTE]

Looks like you're right. I compared his picture to the Pro-Elite website and the BFS.. Dom's center uprights have the same amount of hook placements as the BFS, the front uprights are just shorter. Repped.

[QUOTE=urbanlifter;1613327731]Completely understand, ironically I picked up one of those BFS racks for around $150-$200 myself and did a quick refurb to flip. The monolift was part of my issue with it as well, you'd have to be willing to tap a hole in the uprights and shim a pair of Titan or Rogue mono's to make it work. Dom's rack was a slightly different version I think, where the front uprights were a little shorter than the back. Either way I had a hard time letting go of that beast, but I've never been able to justify having a two rack setup.[/QUOTE]

Yep, I'm looking to buy a pair of REP 3x3 monolifts when they release and modify the flanges to wrap around 3x4 uprights. It was tough to pass on the BFS, but looks like I'll be staying in the half rack club for a bit longer.. a club I joined mostly because of your Pendlay Elite half rack reviews!

[QUOTE=murphyreedus;1613328301]One of these popped up by me for $500 (pre-COVID), and I passed on it for many of these reasons. Massive footprint, no pullup bar, uprights too low, large spacing. My York 3/4's front uprights are around 60", I think, and way too low to use monolifts for squats. 5'10" might work depending on your height. You'd have to still find/make monolifts that would fit.[/QUOTE]

Yeah, it'd be perfect with pull-up height center uprights.

[QUOTE=boxer_for_life;1613359201]Yep, I'm looking to buy a pair of REP 3x3 monolifts when they release and modify the flanges to wrap around 3x4 uprights. It was tough to pass on the BFS, but looks like I'll be staying in the half rack club for a bit longer.. a club I joined mostly because of your Pendlay Elite half rack reviews![/QUOTE]

Half rack crew checking in!!! I'm REALLY interested to see what REP comes up with, considering they have drawn ALOT of inspiration from this forum and feedback on product design. Since I'm in the market for another pair of Mono's for my new rack part of me is hoping they took a page out of Mech's playbook and designed their mono's to his specifications. I'll go Rogue if there is no other option, I'm just hoping they ditch the stupid hockey stick and increase the ROM for the swing arm.

All things considered with COVID, even in a regular market this isn't a bad deal. Full Powerlift Rack + bench for $1500, could do alot worse...

[url]https://www.facebook.com/marketplace/item/3426638064087637/[/url]

[QUOTE=boxer_for_life;1612949871]Beat up BFS open top rack (by Pro-Elite), asking $800 in San Bernardino County: [url]https://offerup.co/eElFFs41M8[/url][/QUOTE]

[QUOTE=urbanlifter;1613282981]I'd be tempted to pay $800 for that rack, it's a diamond in the rough. You will be hard pressed to find a more bomb proof rack that the BFS Open top rack. It's easily the most overbuilt rack I have ever laid hands on......[/QUOTE]

I agree. i sold that same rack to a friend that has a commercial gym a couple years ago for $500. In these times $800 isn't bad. It's good for low ceilings also.

[QUOTE=boxer_for_life;1612949871]Beat up BFS open top rack (by Pro-Elite), asking $800 in San Bernardino County: [url]https://offerup.co/eElFFs41M8[/url][/QUOTE]

[QUOTE=murphyreedus;1613328301] 5'10" might work depending on your height. You'd have to still find/make monolifts that would fit.[/QUOTE]

The middle uprights on Doms rack are 5'10". The tubing is 2"x3" but when you factor in the bolt on piece that has the drop in slots it's right at 3"x3". For my 3"x3" drop in 1/2 rack i bought 3"x3" attachments with 1" pins and cut the pins for the correct depth. Worked great.

Ive been out of the game for a bit but diving back in and getting a new rack set up. I regret missing out on the Rogue Trolley Arm deal a few years ago for $200. i would have bought both 35 and 48 inch back then. I will be on the hunt now for a 35 inch and a 48 inch set deals to go inside and outside the rack. Anyone see any, have any or know someone looking to move a set please let me know. This would be Monster sets(1 inch) versions. If i have to Ill go new over time but if I can find some used or not being used cheaper id consider a deal for sure. Im in the South Jersey area.

Thank you

Can anyone ID this leg press/hack squat combo? I thought it was a Bodysmith/Parabody at first, but it doesn't quite match the Bodysmith models I've seen. Guessing it's of similar quality with the rollers, though. The sticker on it looks to be from a fitness equipment reseller called "Iron Works":


[img]https://forum.bodybuilding.com/attachment.php?attachmentid=9262161&d=1600440891[/img]
[img]https://forum.bodybuilding.com/attachment.php?attachmentid=9262171&d=1600440901[/img]
[img]https://forum.bodybuilding.com/attachment.php?attachmentid=9262181&d=1600440912[/img]

[url]https://pittsburgh.craigslist.org/spo/d/pittsburgh-squat-rack/7200420091.html[/url]

Parabody rack. Pre-Covid the price would've been on the high side, but now with equipment in short supply maybe not a bad pick up for somebody in the market for a rack.

[QUOTE=aloosecannon;1617547321][url]https://pittsburgh.craigslist.org/spo/d/pittsburgh-squat-rack/7200420091.html[/url]

Parabody rack. Pre-Covid the price would've been on the high side, but now with equipment in short supply maybe not a bad pick up for somebody in the market for a rack.[/QUOTE]

That's the newer version of that rack. It is a good rack for a home gym. Price is a little high but as you said , in todays market not bad for a solid rack.

Those pop-pin racks are super nice to adjust, bet someone could even add additional 2x3 attachments with everything we have available on the market today.

They also have an extra set of bar hooks on the front of the spotter arms that work well for racking a bar before/after skull crushers or LTE.

I liked that feature so much, I added a set to my current rack. .

[url]https://www.facebook.com/marketplace/item/949913052182800[/url]

Bought for $250. Will be a nice flip if someone buys at asking.

[QUOTE=BulkMore;1617838181][url]https://www.facebook.com/marketplace/item/949913052182800[/url]

Bought for $250. Will be a nice flip if someone buys at asking.[/QUOTE]

I bought 2 of these - 1 for $475 and 1 for $550. I sold the $550 one for $800 and kept the other one. All of this was pre-COVID though.

Wonder why he's selling all his weights.....LOL

Resellers are starting to come down though.

[url]https://dayton.craigslist.org/spo/d/dayton-olympic-weight-benches-weight/7201877755.html[/url]

[url]https://pittsburgh.craigslist.org/spo/d/wexford-legend-fitness-flat-bench/7205049403.html[/url]

Legend flat bench for $90.

Cybex row in Romeo, MI for $150

[url]https://www.facebook.com/marketplace/item/2770781723164824[/url]

I was poking around eBay and found this
[url]https://www.ebay.com/itm/Nautilus-Flat-Bench/392919871915?hash=item5b7bd971ab:g:My8AAOSwJF1fRV1c[/url]
[img]https://i.imgur.com/4j0V3ix.jpg[/img]
Commercial Nautilus Flat Utility Bench York PA
$150

Looks like a good deal for a really solid commercial flat utility bench. Model #F2FU when Nautilus Commercial made some good stuff.


Sort of dreading moving to a small apartment with my Nautilus F2 FW090.

Icarian hyper in White Hall, MD. Needs pads, but only $50.

[url]https://www.facebook.com/marketplace/item/2667732556825233[/url]

[QUOTE=Duplicitous;1620666121]Icarian hyper in White Hall, MD. Needs pads, but only $50.

[url]https://www.facebook.com/marketplace/item/2667732556825233[/url][/QUOTE]

Pad doesn't even look that bad. Looks like a great deal.

[QUOTE=Duplicitous;1620666121]Icarian hyper in White Hall, MD. Needs pads, but only $50.

[url]https://www.facebook.com/marketplace/item/2667732556825233[/url][/QUOTE]

This was bought and resold for $150...at least thats what it was listed for.

[QUOTE=BulkMore;1621138631]This was bought and resold for $150...at least thats what it was listed for.[/QUOTE]

I saw that. :)

Elkhorn, KY. Nautilus XPLOAD plate loaded leg press for $600.

[url]https://www.facebook.com/marketplace/item/1076969482740085[/url]

[QUOTE=Duplicitous;1621139231]Elkhorn, KY. Nautilus XPLOAD plate loaded leg press for $600.

[url]https://www.facebook.com/marketplace/item/1076969482740085[/url][/QUOTE]

I have the same leg press. The articulating foot platform makes it easier on the knees. I scored mine for $750 with 1100lbs of plates.

The 'Vintage' tag on eBay is getting out of control, since when did these modern Hampton plates become vintage? You'd think they had a set of York DD's.....LOL

[url]https://www.ebay.com/itm/Vintage-Hampton-DEEP-DISH-4-45lb-2-35lb-4-25lb-Olympic-Weight-Plates-380lb/353236657989?hash=item523e8ba745:g:fN0AAOSw7cdfhe3y[/url]

[QUOTE=urbanlifter;1621158161]The 'Vintage' tag on eBay is getting out of control, since when did these modern Hampton plates become vintage? You'd think they had a set of York DD's.....LOL

[url]https://www.ebay.com/itm/Vintage-Hampton-DEEP-DISH-4-45lb-2-35lb-4-25lb-Olympic-Weight-Plates-380lb/353236657989?hash=item523e8ba745:g:fN0AAOSw7cdfhe3y[/url][/QUOTE]

Well, they came from a school gym, that ages them 4 times as quickly, right??!?

[QUOTE=rlundregan;1621159661]Well, they came from a school gym, that ages them 4 times as quickly, right??!?[/QUOTE]

Can see it now, I'll login 20 years from now and all these young kids will be saying "I remember lifting with those when I was a kid" LOL

[QUOTE=urbanlifter;1621162111]Can see it now, I'll login 20 years from now and all these young kids will be saying "I remember lifting with those when I was a kid" LOL[/QUOTE]

I've seen newer Ivanko OMs labeled as "Vintage" too. I mean it's not like you can buy these new NOW... ofc it's a different circumstance currently, lol. I'm guessing they're "Vintage" Style... in that case, the Brand New Rogue Plates are "Vintage" as well Haha.

Next time I sell something I'm going to label it 'Future Vintage', see if I can draw a premium. Bwhaha

My favorite is when someone posts Ivankos for sale and says they are made in the USA. :) I do love that the made in china sticker nearly falls off but "C'mon man..."

I'm going to go dig up some of my vintage welder 1" plates... The rust is what will make them vintage, right?

[QUOTE=NHAngler;1622056631]My favorite is when someone posts Ivankos for sale and says they are made in the USA. :) I do love that the made in china sticker nearly falls off but "C'mon man..."

I'm going to go dig up some of my vintage welder 1" plates... The rust is what will make them vintage, right?[/QUOTE]

There are some vintage Weider deep dish standards that I've had no trouble selling for $3/lb, but most of them are indeed crap.