The Official Craigslist Thread (Round 4)

Magnum 3/4 Rack, $300 seems fair :)

Two days of work and $50 worth of paint...

[url]https://www.facebook.com/marketplace/item/276999316170334[/url]

Why are you so good at this? Find me a Powertec tower for 200 in Mass while you're at it since your posts sold me on it lol

[QUOTE=Za78;1552390391]Why are you so good at this? Find me a Powertec tower for 200 in Mass while you're at it since your posts sold me on it lol[/QUOTE]

Just lucky. Persistence is key though, alot of areas have quality equipment but most people are not dedicated enough to check CL, Facebook, Gov Deals, and eBay several times a day to snag them. Using the right keywords helps too, some people don't really know what they have so you have to get creative to find stuff. A Powertec really shouldn't be that hard to find, given they were sold at DSG for a long time.

Case in point: Posted 12 days ago, Health and Beauty section, NAUTILUS equipment, and I personally would want to have a closer look at this stuff. First Gen Pullover?

[url]https://boston.craigslist.org/bmw/hab/d/nautilis-gym-equipment-cybex/6588803065.html[/url]

Another.....Posted 6 hours ago, LOTS to look at (weights $0.60lb, pulldown for $350 is likely the SLM300G based on description ($1,600 machine)

[url]https://boston.craigslist.org/gbs/spo/d/weights-bars-machines/6599542222.html[/url]

You really do have to keep an eye on health and beauty section, I've seen a lot of stuff there that you would think would be in sporting goods

Good tips!

Managed a little score of my own today. Pairs of 2.5 through 45 of the Rubos with a crappy bar for 50. Should be net 30 after the bar sells.

[img]https://forum.bodybuilding.com/attachment.php?attachmentid=8920251&d=1527376535[/img]

If I was anywhere near Ohio, that 275 bench would be gone.

[i]Gov Deals,[/i]

Never even thought of that one

[QUOTE=Za78;1552390391]Why are you so good at this? Find me a Powertec tower for 200 in Mass while you're at it since your posts sold me on it lol[/QUOTE]

Here you go, but you need to be savvy to pull it off. Comes with 400lbs, bench and leg extension. Let's say you offer $600 cash (or $500 if your ballsy), flip the weights for $0.50/$0/75lb, dump the bench for $200-$250 with the leg extension, and what do you have leftover? A $200-$300 Powertec that you can use with your existing bench, dats how it's done mayne ;)

[url]https://providence.craigslist.org/spo/d/powertec-workbench-levergym/6585263900.html[/url]

Alright Urban, email sent, let’s see if I can make you proud.

[QUOTE=Za78;1552487371]Alright Urban, email sent, let’s see if I can make you proud.[/QUOTE]

Haha, good luck! You never know what can happen with deals like this, might walk in and find out the 400lbs of plates are Ivanko Revolvers LOL.

[QUOTE=urbanlifter;1552513151]Haha, good luck! You never know what can happen with deals like this, might walk in and find out the 400lbs of plates are Ivanko Revolvers LOL.[/QUOTE]

reading the ad, i think the guy is selling an older model thats not made to be free standing with ones own bench. Ive no idea if those older machines are designed in such a way that using your own bench wouldnt work????? or is either machine the same regardless?

This has to be someone here...reveal yourself

[url]https://phoenix.craigslist.org/evl/spo/d/bumper-plates-bars-storage/6599960667.html[/url]

[quote]Selling some of my excess equipment;

-Vulcan strength standard multi use barbell. Barely used. $200

-American Barbell Grizzly Power Bar. Brand new $215

-American Barbell stainless steel precision oly bar. New. $400

-Full set of diamond pro crumb rubber bumpers. 2-45,2-35,2-25,2-15,2-10 $300

-rep Fitness Bumper plate rack $60

-rogue bumper plate rack $120

-xmark curl bar $50[/quote]

[img]https://images.craigslist.org/00V0V_5wjEG1J8VsS_600x450.jpg[/img]

[url]https://providence.craigslist.org/spo/d/strongman-equipment/6601645688.html[/url]

Some heavy duty strongman gear in RI

[QUOTE=keyboardworkout;1552551561]This has to be someone here...reveal yourself

[url]https://phoenix.craigslist.org/evl/spo/d/bumper-plates-bars-storage/6599960667.html[/url]



[img]https://images.craigslist.org/00V0V_5wjEG1J8VsS_600x450.jpg[/img][/QUOTE]

Not a bad problem to have if those are the excess bars

[QUOTE=dskoo65;1552547911]reading the ad, i think the guy is selling an older model thats not made to be free standing with ones own bench. Ive no idea if those older machines are designed in such a way that using your own bench wouldnt work????? or is either machine the same regardless?[/QUOTE]

Its possible, might even be better if it's older like mine because you can more easily convert it to work as belt squat and still use a bench for incline / flat work.

[QUOTE=magicmatt;1552552441]Not a bad problem to have if those are the excess bars[/QUOTE]


Life is suffering...I think Arnold said that.

Is an old Nautilus hip and back machine worth looking at?

[Img]https://forum.bodybuilding.com/attachment.php?attachmentid=8922351&d=1527631259[/img]

The older ones I've seen look like they have a stack. Can't find much on this model.

[QUOTE=murphyreedus;1552629331]Is an old Nautilus hip and back machine worth looking at?

The older ones I've seen look like they have a stack. Can't find much on this model.[/QUOTE]I don't know much about them, but Nautilus offered several pieces as home models. Not sure how the resistance was created. I think that may be the abdominal beside the hip and back. Those are pretty common on craigslist or FB marketplace.

[QUOTE=deadwoodgregg;1552631761]I don't know much about them, but Nautilus offered several pieces as home models. Not sure how the resistance was created. I think that may be the abdominal beside the hip and back. Those are pretty common on craigslist or FB marketplace.[/QUOTE]

Thanks. That makes sense. I couldn't figure out any more resistance than my legs pushing on it, and the shop knew nothing about it. It was the ab unit next to it. Both were very inexpensive, but I am not sure where I'd find the room anyway.

[Img]https://forum.bodybuilding.com/attachment.php?attachmentid=8922521&d=1527643842[/img]

[QUOTE=urbanlifter;1552478681]Here you go, but you need to be savvy to pull it off. Comes with 400lbs, bench and leg extension. Let's say you offer $600 cash (or $500 if your ballsy), flip the weights for $0.50/$0/75lb, dump the bench for $200-$250 with the leg extension, and what do you have leftover? A $200-$300 Powertec that you can use with your existing bench, dats how it's done mayne ;)

[url]https://providence.craigslist.org/spo/d/powertec-workbench-levergym/6585263900.html[/url][/QUOTE]

I'll take a legend pro series half rack for ~$400 while you're at it lol...

Scored a set of Pro-Rexan Powerblocks 5-85lb with the stand for $250.

Two of the selections stick a bit on one. Gotta grease them up and maybe tweak the plate angle a touch. All in all, I'm happy.

[QUOTE=Bignick31985;1552697601]Scored a set of Pro-Rexan Powerblocks 5-85lb with the stand for $250.

Two of the selections stick a bit on one. Gotta grease them up and maybe tweak the plate angle a touch. All in all, I'm happy.[/QUOTE]

Sweet pickup, you got an awesome deal! I love my Pro-Rexan set, they have replaced the original 'The Block' as my favorite adjustable dumbbell. You should be able to square them up pretty easy (put one corner on the ground, then drop a knee on the opposite corner), I have done this with numerous smaller sets that I bought damaged to resell. Quick fix and they will work like new when you are done. Enjoy the DB's, they are keepers!

[b]THIS is NOT a CLASSIFIED SECTION!!!
THIS IS NOT THE PLACE TO POST STUFF YOU HAVE FOR SALE!!![/b]

I'm seeing a lot of people and (some not noobs!) posting items they have for sale in this section. That is not what it is for and is against board rules. There is a craigslist sticky for posting great deals you see but if it isn't a great deal expect it to be commented on negatively.


From this point forward any "for sale" threads in this section will result in the threads deletion and a moderator neg.

A second offense will result in a ban.

Third offenses will result in your permanent removal as a spammer.

Somebody grab these, Hammer Strength DL for $75 and commercial grade leverage squat for $100!!!

[url]https://cincinnati.craigslist.org/hab/d/gym-equipment/6603357052.html[/url]

[QUOTE=urbanlifter;1552864151]Somebody grab these, Hammer Strength DL for $75 and commercial grade leverage squat for $100!!!

[url]https://cincinnati.craigslist.org/hab/d/gym-equipment/6603357052.html[/url][/QUOTE]

i saw a hammer DL a year or so ago but they were asking several hundred. for $75 i'd buy that in a second to test it out

[QUOTE=Domicron;1552882411]i saw a hammer DL a year or so ago but they were asking several hundred. for $75 i'd buy that in a second to test it out[/QUOTE]

I have used one before, they are REALLY nice for shrugs and DL's. Would have picked it up if I didn't already have my Powertec, which essentially allows me to do the same thing with my elevated platform. I was more tempted by the leverage squat, looks like a nice unit (similar looking to the Bear Squat), but again thanks to the Powertec I have that already. Someone should buy that Hammer and flip, that's easy profit right there.

Theres this old standing calf raise in Baltimore, looks pretty vintage
[url]https://baltimore.craigslist.org/spo/d/standing-calf-raise/6587955692.html[/url]

Dan Lurie fixed dumbbells 25-85 set (??)... somebody please tell me these aren't worth anything so I won't pick them up... The color looks odd (spray painted?), but honestly I know Zero about these other than the name...

[img]https://scontent-dfw5-2.xx.fbcdn.net/v/t34.0-12/26755442_398150973976008_1166577881_n.jpg?_nc_cat=0&oh=7d49e1a380fc5a205a2a1845e94c6233&oe=5B159406[/img]

[img]https://scontent-dfw5-2.xx.fbcdn.net/v/t1.0-9/26229886_1542792442506099_8358563297079931585_n.jpg?_nc_cat=0&oh=691fc49e257d640d1ecc4c043aa738d8&oe=5BB3C783[/img]

[QUOTE=thejosef;1552920621]Dan Lurie fixed dumbbells 25-85 set (??)... somebody please tell me these aren't worth anything so I won't pick them up... The color looks odd (spray painted?), but honestly I know Zero about these other than the name...

[img]https://scontent-dfw5-2.xx.fbcdn.net/v/t34.0-12/26755442_398150973976008_1166577881_n.jpg?_nc_cat=0&oh=7d49e1a380fc5a205a2a1845e94c6233&oe=5B159406[/img]

[img]https://scontent-dfw5-2.xx.fbcdn.net/v/t1.0-9/26229886_1542792442506099_8358563297079931585_n.jpg?_nc_cat=0&oh=691fc49e257d640d1ecc4c043aa738d8&oe=5BB3C783[/img][/QUOTE]

I don’t have any info on them but if the price is good go get them.

Took a while but finally got some pics from the WB-LS seller. It is a much older model. He said the bench swings out or unbolts. This is pre weight storage as well. The weights with it are DSG from 10-15 years ago and worth the minimum. Thoughts?

[img]https://forum.bodybuilding.com/attachment.php?attachmentid=8924991&d=1527979013[/img]

[img]https://forum.bodybuilding.com/attachment.php?attachmentid=8925001&d=1527979045[/img]