The Official Craigslist Thread (Round 4)

[QUOTE=urbanlifter;1595882491]Honestly I'm not surprised, if I recall correctly that early model was rather rare and sought after. Sometimes I wish I would have kept my SuperPullover, but I still understand why I sold it. Fantastic machine but they take up so much space for such limited use. I decided to pass on the one in the picture even though it was rare, having to load plates in the rear would be a pain in the butt and eat up even more floor space.[/QUOTE]


thats why i love my polaris one. not too big a footprint. also shoulder and elbow adjustable for any size a person. ive never seen another like that.

[QUOTE=matrix563;1595893051]thats why i love my polaris one. not too big a footprint. also shoulder and elbow adjustable for any size a person. ive never seen another like that.[/QUOTE]

Take some pics and upload them. We'd love to see your gym.

Saw this, looked interesting:
Reading PA - Hammer Strength Ground Base Combo Incline $425
[url]https://baltimore.craigslist.org/spo/d/reading-hammer-strength-combo-incline/7065835532.html[/url]
[img]https://i.imgur.com/8nt66eu.jpg[/img]
Sort of a standing incline press and high row combo.
[youtube]rSA7NcZTskI[/youtube]
[url]https://lifefitness.com/facility/products/hammer-strength-plate-loaded/combo-incline[/url]
[quote]The Plate-Loaded Ground Base Combo Incline loads at opposite points allowing users to perform a twisting motion in an incline plane. And handles provide user stabilization during single-arm exercises. Ground Base equipment is designed to keep the exerciser firmly planted on the ground while maximizing power and explosiveness from the feet up.[/quote]

[QUOTE=ampire;1596742891]Saw this, looked interesting:
Reading PA - Hammer Strength Ground Base Combo Incline $425
[url]https://baltimore.craigslist.org/spo/d/reading-hammer-strength-combo-incline/7065835532.html[/url]
[img]https://i.imgur.com/8nt66eu.jpg[/img]
Sort of a standing incline press and high row combo.
[youtube]rSA7NcZTskI[/youtube]
[url]https://lifefitness.com/facility/products/hammer-strength-plate-loaded/combo-incline[/url][/QUOTE]

There was one of these in that general direction for $225 several months ago, but I passed on it. Since then I've seen a couple others go for $400-700, so $425 seems like a fair deal. I probably should have grabbed that one for $225 and flipped it. :p

[QUOTE=Duplicitous;1596749941]There was one of these in that general direction for $225 several months ago, but I passed on it. Since then I've seen a couple others go for $400-700, so $425 seems like a fair deal. I probably should have grabbed that one for $225 and flipped it. :p[/QUOTE]

Looks like it would be an appropriate machine for training high school and college athletes rather than for training bodybuilding. Still looked interesting due to the opposing push/pull dynamic.

Anyone seen a Universal leg press/hack squat? Doesn't look like the world's best leg press, but does look like it could fit into what little floor space I have left. Seller says it has no seat, just a back pad, which seems odd to me, but I can find absolutely no info on it. The only Universal equipment I've seen are their home gyms.

[img]https://forum.bodybuilding.com/attachment.php?attachmentid=9193951&d=1580501991[/img]

[QUOTE=murphyreedus;1596793261]Anyone seen a Universal leg press/hack squat? Doesn't look like the world's best leg press, but does look like it could fit into what little floor space I have left. Seller says it has no seat, just a back pad, which seems odd to me, but I can find absolutely no info on it. The only Universal equipment I've seen are their home gyms.

[img]https://forum.bodybuilding.com/attachment.php?attachmentid=9193951&d=1580501991[/img][/QUOTE]

It's hard to imagine it didn't have at least some type panel there. You could easily put one there if need be. I hope it's cheap cheap. :D

Life Fitness CMDAP functional trainer in San Diego, CA. This is a 1:4 unit, which I know some guys don't like, but these are smooth as butter and that's a great price even if you can't get him down.

[url]https://www.facebook.com/marketplace/item/640779026725538/[/url]

Sorinex power rack with flip-down safeties and weight storage in NY. $650

[url]https://www.facebook.com/marketplace/item/2554182608128832/[/url]

[QUOTE=Duplicitous;1598183991]Sorinex power rack with flip-down safeties and weight storage in NY. $650

[url]https://www.facebook.com/marketplace/item/2554182608128832/[/url][/QUOTE]

There's an Atlantis rack with storage near me for $750. It looks like it was never used.

[QUOTE=irongrandpa;1598204431]There's an Atlantis rack with storage near me for $750. It looks like it was never used.[/QUOTE]

I had an Atlantis half rack with platform and an Atlantis Poliquin full rack in like new condition and I sat on them for months and had to lower the price to $550. I find that people on Ohio or this region have no clue who Atlantis is or how nice their equipment is.

[QUOTE=OSUDimond;1598550061]I had an Atlantis half rack with platform and an Atlantis Poliquin full rack in like new condition and I sat on them for months and had to lower the price to $550. I find that people on Ohio or this region have no clue who Atlantis is or how nice their equipment is.[/QUOTE]


Paint it black, slap a Rogue sticker on it, and use the word "crossfit" in your listing. It'll be gone in minutes for 3x what it's worth. :D

I haven't posted on here in forever, hoping to get some help as I will be moving and unfortunately will not have room for my pieces. I've posted a few on CL and I've probably overpriced a bit, but the Philly CL market is full over overpriced flippers last I recall.

Anyway, would anyone be up for exchanging some PM's and helping me price things out? I'd like to get everything moved over the next 4-6 weeks. I don't want to list out everything here and skirt on breaking the forum rules.

[QUOTE=snova031;1598555831]I haven't posted on here in forever, hoping to get some help as I will be moving and unfortunately will not have room for my pieces. I've posted a few on CL and I've probably overpriced a bit, but the Philly CL market is full over overpriced flippers last I recall.

Anyway, would anyone be up for exchanging some PM's and helping me price things out? I'd like to get everything moved over the next 4-6 weeks. I don't want to list out everything here and skirt on breaking the forum rules.[/QUOTE]

Reach out to Atty, he loves to take people under his wing.

[QUOTE=Stasher1;1598550251]Paint it black, slap a Rogue sticker on it, and use the word "crossfit" in your listing. It'll be gone in minutes for 3x what it's worth. :D[/QUOTE]

The Rogue used market blows my mind. Every single thing is then compared to Rogues prices so they dictate the used market pricing too for similar products from different brands. I am working towards doing more and more business with them so eventually it may really pay off that I'm 15 minutes from them.

I've been running out of room so I avoided c-list or fb marketplace, etc. Then, I see this thing on the curb, with a free sign on it, a couple houses down from me. Had to have it.

[url]https://imgur.com/gallery/jNNvcIC[/url]

[QUOTE=g8rlaw;1599344041]I've been running out of room so I avoided c-list or fb marketplace, etc. Then, I see this thing on the curb, with a free sign on it, a couple houses down from me. Had to have it.

[url]https://imgur.com/gallery/jNNvcIC[/url][/QUOTE]


Nice. Is it fully functional?

[QUOTE=Stasher1;1599350821]Nice. Is it fully functional?[/QUOTE]

Yes. Gave it a test run, and everything seems functional, except the electronic display which probably just needs a battery. A bit squeaky at higher speeds, but I'm sure I can take care of that pretty easily.

[QUOTE=g8rlaw;1599361341]Yes. Gave it a test run, and everything seems functional, except the electronic display which probably just needs a battery. A bit squeaky at higher speeds, but I'm sure I can take care of that pretty easily.[/QUOTE]


In the interest of retaining its resale value, I'd suggest disconnecting the "speedo" cable. They're no longer available, and typically bring about $50 on Ebay in good condition. The gauge isn't really suitable for HIIT training anyway, because high RPM ranges will make the gauge spin all the way around. :D

The electronic timer may need a battery, but it may also need a new polarizing filter. If you remove the outer piece of plastic on that display, the screen will appear blank. It's only visible thru the polarized filter. I wouldn't have thought it possible, but the original timer on the one I just sold was just in need of a new filter. It was easier for me to replace the timer with a functioning used one, but a piece of filter would've worked as well.

If you plan on keeping it and using it for HIIT or tabatas, I'd upgrade it to a newer electronic console.

[QUOTE=Stasher1;1599365111]In the interest of retaining its resale value, I'd suggest disconnecting the "speedo" cable. [I]They're no longer available, and typically bring about $50 on Ebay in good condition[/I]. The gauge isn't really suitable for HIIT training anyway, because high RPM ranges will make the gauge spin all the way around. :D

The electronic timer may need a battery, but it may also need a new polarizing filter. If you remove the outer piece of plastic on that display, the screen will appear blank. It's only visible thru the polarized filter. I wouldn't have thought it possible, but the original timer on the one I just sold was just in need of a new filter. It was easier for me to replace the timer with a functioning used one, but a piece of filter would've worked as well.

If you plan on keeping it and using it for HIIT or tabatas, I'd upgrade it to a newer electronic console.[/QUOTE]

I did not know about the speedo cable. I'll set it aside as I plan to do a teardown and clean and respray everything. I guess I can try to part the cable separately and use that to help buy a newer electronic console. If I keep it, I plan to upgrade the pedals (looks like a dog chewed on one), the foam on the handlebars, and possibly the seat.

The handlebar foam is available from Amazon in a four pack for pretty cheap, and the pedals are the smaller diameter BMX-style threads (1/2"?).

If you decide to do a console upgrade, decide whether you want to go with the (newer) original style or if you want to invest the $$ in an Assault bike style console. The magnetic sending unit on the fan is the same either way, so it's just a matter of how original you want to keep it. The Xebex Air Bike console is only $60 or so, works great, and fits the original brackets with a little bit of modding.

I also have a fully functional Airdyne console with cable and pickup that I took off mine, and probably have an extra set of new grips too, if you're looking to keep it more original.

How much should i sell these for? Someone is offering 29 dollars for them right now. But i think i can ask for due to the corona virus hype and every gym being closed.

20 lbs per db.
4 plates of 2.2 lbs.
4 plates of 1.1 lbs.
the handles and the spinlocks.

[img]https://i.postimg.cc/c4cZMBFg/k.png[/img]

[QUOTE=backinthegymbro;1600528481]How much should i sell these for? Someone is offering 29 dollars for them right now. But i think i can ask for due to the corona virus hype and every gym being closed.

20 lbs per db.
4 plates of 2.2 lbs.
4 plates of 1.1 lbs.
the handles and the spinlocks.

[img]https://i.postimg.cc/c4cZMBFg/k.png[/img][/QUOTE]


They appear to be cheap, Chinese spinlocks. I think their offer is about 50% more than they're worth.

You might be able to get more for them if you find a small, weak, desperate woman looking for low-end adjustable dumbbells...but that's your call.

[QUOTE=Stasher1;1600529161]They appear to be cheap, Chinese spinlocks. I think their offer is about 50% more than they're worth. [/quote]

Not sure what's cheap about them. It's just basic cast iron plates.
The highest bid just got bumped to $37. Within an hour of listing it total.
I think i'll sell it tomorrow and see how much further it goes up.

Thanks for the reply!

[QUOTE=backinthegymbro;1600528481]How much should i sell these for? Someone is offering 29 dollars for them right now. But i think i can ask for due to the corona virus hype and every gym being closed.

20 lbs per db.
4 plates of 2.2 lbs.
4 plates of 1.1 lbs.
the handles and the spinlocks.

[img]https://i.postimg.cc/c4cZMBFg/k.png[/img][/QUOTE]

I just sold a set at .70/lb + $15 for a set of inferior handles. I think you could get $45-50 for them.

[QUOTE=Duplicitous;1600530591]I just sold a set at .70/lb + $15 for a set of inferior handles. I think you could get $45-50 for them.[/QUOTE]

I just sold them for $93. Crazy what people are willing to pay for them.

[QUOTE=backinthegymbro;1600728101]I just sold them for $93. Crazy what people are willing to pay for them.[/QUOTE]

Wow. Congrats.

If any good bros find any good deal in Arizona hit me up :D

I'm in the process of rebuilding my garage gym. I have my power rack that I ordered. I'm piecing together everything else.

Thanks fellas.

[QUOTE=Anthony21;1600749031]If any good bros find any good deal in Arizona hit me up :D

I'm in the process of rebuilding my garage gym. I have my power rack that I ordered. I'm piecing together everything else.

Thanks fellas.[/QUOTE]

I just saw a 50-lb set of "The Block" Powerblocks sell for $1K firm in just a few hours. Good luck finding deals right now. :x

[QUOTE=Duplicitous;1600750151]I just saw a 50-lb set of "The Block" Powerblocks sell for $1K firm in just a few hours. Good luck finding deals right now. :x[/QUOTE]

Yeah I know this isn't the best time for that. I've been wanting to piece together my garage gym again and this Covid-10 crap was the push I needed.