Printable View
Figure I would get this one going again.
Round 1: [url]http://forum.bodybuilding.com/showthread.php?t=109374491[/url]
Round 2: [url]http://forum.bodybuilding.com/showthread.php?t=124520311[/url]
Round 3: [url]https://forum.bodybuilding.com/showthread.php?t=161832313[/url]
Let's find those deals!
greenville.craigslist.org/spo/d/power-rack/6252913198.html
To me (maybe some of the legend folks can chime in) this looks like a 3171. The two interior weight storage pins on each side are throwing me for a loop. If one of you pick it up, be sure to post some pictures. I'd like to see how it turns out.
[QUOTE=EHC1228;1516430131]greenville.craigslist.org/spo/d/power-rack/6252913198.html
To me (maybe some of the legend folks can chime in) this looks like a 3171. The two interior weight storage pins on each side are throwing me for a loop. If one of you pick it up, be sure to post some pictures. I'd like to see how it turns out.[/QUOTE]
all the commercial racks on CL in my area are listed close to or over a grand. in fact i bought my rack from the east coast and had it shipped for far cheaper than i've seen listed on CL. i'm so jealous that finds like this pop up for you guys.
[QUOTE=Domicron;1516487721]all the commercial racks on CL in my area are listed close to or over a grand. in fact i bought my rack from the east coast and had it shipped for far cheaper than i've seen listed on CL. i'm so jealous that finds like this pop up for you guys.[/QUOTE]
I have seen some Rogue equipment around my area in Los Angeles, but all the sellers seem to think they're worth new MSRP (without tax and shipping).
[QUOTE=EHC1228;1516430131]greenville.craigslist.org/spo/d/power-rack/6252913198.html
To me (maybe some of the legend folks can chime in) this looks like a 3171. The two interior weight storage pins on each side are throwing me for a loop. If one of you pick it up, be sure to post some pictures. I'd like to see how it turns out.[/QUOTE]
Probably a pretty solid rack, but it's definitely an ugly mofo. Don't like the use of 3x3 chunks on the ends of the pullup bar and other areas where the sections are bolted together. Makes it look like someone's home-built rack, cobbled together from scraps.
[img]http://www.hunt101.com/data/500/medium/00707_jaQxLGi33FR_1200x900.jpg[/img]
[QUOTE=Stasher1;1516496201]Probably a pretty solid rack, but it's definitely an ugly mofo. Don't like the use of 3x3 chunks on the ends of the pullup bar and other areas where the sections are bolted together. Makes it look like someone's home-built rack, cobbled together from scraps.
[img]http://www.hunt101.com/data/500/medium/00707_jaQxLGi33FR_1200x900.jpg[/img][/QUOTE]
paint anything battleship gray and it loses its luster
[QUOTE=Stasher1;1516496201]Don't like the use of 3x3 chunks on the ends of the pullup bar and other areas where the sections are bolted together. Makes it look like someone's home-built rack, cobbled together from scraps.
[img]http://www.hunt101.com/data/500/medium/00707_jaQxLGi33FR_1200x900.jpg[/img][/QUOTE]
Legend wisely got away from that silly looking design. Now it is a 3X3 plate that blends in just fine with the uprights. I've never been able to figure out a functional or aesthetic reason for that style
$150 broken Cable....
How hard is the cable to get?
[QUOTE=Ironskunk;1517027781]$150 broken Cable....
How hard is the cable to get?
[IMG]https://forum.bodybuilding.com/attachment.php?attachmentid=8734111&d=1503438850[/IMG]
[/QUOTE]
I suppose you have about three options:
1 - build your own cable (swage tool and cable available from the home center)
2 - get a marine supply shop to make a replacement
3 - buy original cable replacement from exercise repair shop on-line
Those are probably price ascending and quality ascending options. #1 and #2 probably will be much easier if you have the original broken cable to clone.
[QUOTE=Ironskunk;1517027781]$150 broken Cable....
How hard is the cable to get?[/QUOTE]
You're going to have to make your own or have someone do it for you. It's not going to be available online with that brand. If you do it alone here's what I'd estimate it will cost you
3/16" cable (at least 2000lb tensile strength) - $0.15 to $1.00 per foot, since you only need I'd say no more 12-15 ft I'd lean towards $6.00-$7.50
Swage tool - $29.00 to $39.00 (Department Store Vs local hardware store)
Sleeve Stop - $0.40 to $1.00 (You might need two depending on what the cable ends underneath the seat)
Cable Bolts - Hopefully you can just cut the wire that connects through this or else you'd probably be paying around $17 to $29 for this
I would RECOMMEND checking you're local Hardware Store (like Ace) as they will have all the stuff you need for making new cables, the only downfall is usually their cables are around 300-500 tensile strength
Good Luck!
[QUOTE=SomeIronBoy;1517050311]You're going to have to make your own or have someone do it for you. It's not going to be available online with that brand. If you do it alone here's what I'd estimate it will cost you
3/16" cable (at least 2000lb tensile strength) - $0.15 to $1.00 per foot, since you only need I'd say no more 12-15 ft I'd lean towards $6.00-$7.50
Swage tool - $29.00 to $39.00 (Department Store Vs local hardware store)
Sleeve Stop - $0.40 to $1.00 (You might need two depending on what the cable ends underneath the seat)
Cable Bolts - Hopefully you can just cut the wire that connects through this or else you'd probably be paying around $17 to $29 for this
I would RECOMMEND checking you're local Hardware Store (like Ace) as they will have all the stuff you need for making new cables, the only downfall is usually their cables are around 300-500 tensile strength
Good Luck![/QUOTE]
Thank You. Was hoping for a link to gym parts or something. LOL
So Yeah.. I guess Ill save the drive. Thank you!
[QUOTE=SomeIronBoy;1517050311]You're going to have to make your own or have someone do it for you. It's not going to be available online with that brand. If you do it alone here's what I'd estimate it will cost you
3/16" cable (at least 2000lb tensile strength) - $0.15 to $1.00 per foot, since you only need I'd say no more 12-15 ft I'd lean towards $6.00-$7.50
Swage tool - $29.00 to $39.00 (Department Store Vs local hardware store)
Sleeve Stop - $0.40 to $1.00 (You might need two depending on what the cable ends underneath the seat)
Cable Bolts - Hopefully you can just cut the wire that connects through this or else you'd probably be paying around $17 to $29 for this
I would RECOMMEND checking you're local Hardware Store (like Ace) as they will have all the stuff you need for making new cables, the only downfall is usually their cables are around 300-500 tensile strength
Good Luck![/QUOTE]
An alternative is to go to a marine store or marina, particularly one that sells sailing supplies. They typically have everything needed to make a cable on-site. Take the old cable with you, and you should be all set.
Our local hardware will make one to match your old one and only charges for the material. I found that Home Depot sells a crimping tool for $20 that works great . I bought one just for the convenience of making cables at the house.
[QUOTE=Ironskunk;1517067841]Was hoping for a link to gym parts or something.[/QUOTE]Study this parts page and you will figure out how to replace it.
[url]http://www.exercise-equipment-parts.com/cables-and-parts.html[/url]
[url]http://www.exercise-equipment-parts.com/replacement-cable.html[/url]
[QUOTE=deadwoodgregg;1517093251]Study this parts page and you will figure out how to replace it.
[url]http://www.exercise-equipment-parts.com/cables-and-parts.html[/url]
[url]http://www.exercise-equipment-parts.com/replacement-cable.html[/url][/QUOTE]
This.
Or call these guys
[url]https://tkstar.com/product-category/maxicam-cables-gym-parts/[/url]
They don't list the leg press but I wouldn't be surprised if they could tell you the dimensions.
[QUOTE=Ironskunk;1517067841]Thank You. Was hoping for a link to gym parts or something. LOL
So Yeah.. I guess Ill save the drive. Thank you![/QUOTE]
Are they asking $150 for it . The weight stack is worth that much. If you make the cable yourself you'll have less than $200 in the whole thing.
FYI, there is a Rogue Russian Boneyard bar selling in Texas that a guy is selling using MY PICS. Not cool. [B]It's not me[/B], just an FYI. He's not mentioning that it's a boneyard bar, which is kinda lame. I sold mine last week so I guess the guy is trying to sell it as a new Russian bar (not boneyard) and make a profit. Not cool, but whatever. It looks like somebody else already contacted him and called him out on it which is kinda funny. They created a separate post on CL as a "do not buy Russian bar". Lol.
Dude selling using my pics..
[url]https://sanantonio.craigslist.org/spo/d/rogue-28mm-mens-russian-bar/6268586728.html[/url]
Lol..
[url]https://sanantonio.craigslist.org/spo/d/warningdo-not-buy-rogue/6276261584.html[/url]
[QUOTE=thejosef;1517103261]FYI, there is a Rogue Russian Boneyard bar selling in Texas that a guy is selling using MY PICS. Not cool. [B]It's not me[/B], just an FYI. He's not mentioning that it's a boneyard bar, which is kinda lame. I sold mine last week so I guess the guy is trying to sell it as a new Russian bar (not boneyard) and make a profit. Not cool, but whatever. It looks like somebody else already contacted him and called him out on it which is kinda funny. They created a separate post on CL as a "do not buy Russian bar". Lol.
Dude selling using my pics..
[url]https://sanantonio.craigslist.org/spo/d/rogue-28mm-mens-russian-bar/6268586728.html[/url]
Lol..
[url]https://sanantonio.craigslist.org/spo/d/warningdo-not-buy-rogue/6276261584.html[/url][/QUOTE]
Wait - how do you know his bar is from the boneyard?
[QUOTE=Cleveland33;1517105461]Wait - how do you know his bar is from the boneyard?[/QUOTE]
because you'd have to be one dumb sob to include a picture of double tracked knurling from a boneyard bar if the one you're selling doesn't have double tracked knurling.
[QUOTE=Cleveland33;1517105461]Wait - how do you know his bar is from the boneyard?[/QUOTE]
[QUOTE=cwcmac;1517110521]because you'd have to be one dumb sob to include a picture of double tracked knurling from a boneyard bar if the one you're selling doesn't have double tracked knurling.[/QUOTE]
And the black endcap that you can barely see. Russian bar has red endcaps. And I sold my boneyard bar to this guy last week. Lol. I really don't care that he wants to flip it, or whatever, but not mentioning it's a boneyard bar AND using my photos kinda sucks. I've already had two guys text me that they saw my gym and bar on there..
[QUOTE=cwcmac;1517110521]because you'd have to be one dumb sob to include a picture of double tracked knurling from a boneyard bar if the one you're selling doesn't have double tracked knurling.[/QUOTE]
yea but they aren't his pics anyway
[QUOTE=thejosef;1517110811]And the black endcap that you can barely see. Russian bar has red endcaps. And I sold my boneyard bar to this guy last week. Lol. I really don't care that he wants to flip it, or whatever, but not mentioning it's a boneyard bar AND using my photos kinda sucks. I've already had two guys text me that they saw my gym and bar on there..[/QUOTE]
Ah - you didn't specify that it was the same guy/bar flipping it. I thought he was only using your pics out of being lazy.
See a lot of ads that use pics taken from here that I know aren't that seller's.
[QUOTE=Cleveland33;1517114351]
See a lot of ads that use pics taken from here that I know aren't that seller's.[/QUOTE]
Yup. Found a pic of my previous basement gym in a listing on the Atlanta CL. Guy was cool about it and took it down as soon as I contacted him, but it's a bit shocking to click on a CL listing and see your stuff.
[QUOTE=Stasher1;1517131111]Yup. Found a pic of my previous basement gym in a listing on the Atlanta CL. Guy was cool about it and took it down as soon as I contacted him, but it's a bit shocking to click on a CL listing and see your stuff.[/QUOTE]
If I saw my stuff on CL I'd just assume I really did something bad to piss my wife off that much
[QUOTE=Stasher1;1517131111]Yup. Found a pic of my previous basement gym in a listing on the Atlanta CL. Guy was cool about it and took it down as soon as I contacted him, but it's a bit shocking to click on a CL listing and see your stuff.[/QUOTE]
We looked at a new construction house up in dunwoody one time 7-8 yrs ago. I then noticed a contractor ad in the local newspaper/magazine that used a photo from the new construction house listing that the contractor obviously just borrowed. I contacted the builder and in the next month newspaper the ad was different. People are shady.
[QUOTE=Cleveland33;1517114351]
Ah - you didn't specify that it was the same guy/bar flipping it. I thought he was only using your pics out of being lazy.
See a lot of ads that use pics taken from here that I know aren't that seller's.[/QUOTE]
I really didn't think it was the same bar at first.. The guy was a repeat customer and very excited about the Russian bar. But I did confirm that it was the same guy and the same bar I sold.. only 1 week ago. Ah well.. not a huge deal. Just lame that he's lying and using my pics. However, being that he's using my pics, he's actually hurting his lie. He's not mentioning it's a boneyard bar, but I clearly had a shot of the messed up knurl, which he put in his listing. Lol.
Saw these on CL...Pendlay Competition bumpers...what would be a smokin' deal for this 90 Kg set?
[img]http://i.imgur.com/xqurBrB.jpg[/img]
[QUOTE=401Delta;1517184281]Saw these on CL...Pendlay Competition bumpers...what would be a smokin' deal for this 90 Kg set?
[img]http://i.imgur.com/xqurBrB.jpg[/img][/QUOTE]
They would've been about $3/lb for new ones shipped. They're really nice plates , so what you're willing to pay is up to you. Typically, 1/2 retail is a starting point if they're in great shape, less is better.
Anyone used Intek Urethane Armor bumpers before? How are they?
[Img]https://forum.bodybuilding.com/attachment.php?attachmentid=8735721&stc=1&d=1503605948[/img]
I've used and own some of their urethane Olympic plates. I love them! I like the somewhat flat finish on them, compared to a glossy finish.
[QUOTE=irongrandpa;1517206631]They would've been about $3/lb for new ones shipped. They're really nice plates , so what you're willing to pay is up to you. Typically, 1/2 retail is a starting point if they're in great shape, less is better.[/QUOTE]Thanks for the advice...he's asking almost retail, but I figured they'll sit there for a while. Just wanted a second opinion on making an offer if they do.
Poverty reps to you :).
[QUOTE=murphyreedus;1517252301]Anyone used Intek Urethane Armor bumpers before? How are they?
[Img]https://forum.bodybuilding.com/attachment.php?attachmentid=8735721&stc=1&d=1503605948[/img][/QUOTE]Don't know about the bumpers, but I have Intek urethane grip plates and they're top tier.
Older westside reverse hyper for $550 seem like a decent deal? Been watching for one since the end of February after missing out on good deal for a rogue unit and at this point I kinda just want to be done with the search.
[QUOTE=tedfords;1517372541]Older westside reverse hyper for $550 seem like a decent deal? Been watching for one since the end of February after missing out on good deal for a rogue unit and at this point I kinda just want to be done with the search.[/QUOTE]
Only you can determine its value to you.
Market, want, need,
to me in the So. Ca. market I would offer less... of course.
it looks clean though well used.. but I wonder how much more a new is. RH-2 is $795 personally Id be at 350 - 400 or saving another $250+ shipping... thats me...
[QUOTE=Ironskunk;1517376201]Only you can determine its value to you.
Market, want, need,
to me in the So. Ca. market I would offer less... of course.
it looks clean though well used.. but I wonder how much more a new is. RH-2 is $795 personally Id be at 350 - 400 or saving another $250+ shipping... thats me...[/QUOTE]
Definitely, I'm second in line to check it out tomorrow so I guess I'll see what happens. At this point I might just end up grabbing the rogue on black friday
[QUOTE=401Delta;1517259721]Thanks for the advice...he's asking almost retail, but I figured they'll sit there for a while. Just wanted a second opinion on making an offer if they do.
Poverty reps to you :).[/QUOTE]
These are the Classic colored competition plates, use to be sold by MDUSA. While they are probably the same as other competition plates, that was always a very popular graphic design, and the Pendlay brand has a loyal following, but probably not as big as Rogue. Some company bought out the stock from MDUSA and they were selling that set for $750 plus shipping. I think they are destined to be a classic, and if you could get them for a good price, should always be worth what you paid whenever you sell.
Anybody experience with Superior barbell plates?
The only thread I could find was this
[url]https://forum.bodybuilding.com/showthread.php?t=143406043[/url]
But the plates I am referring to have Made in USA on them, similar to Olympian plates. They DD plates. 2" outside and 1.25" inside , so they are deeper than unbranded ivanko.
Question
1. Are the holes machined?
2. If anybody has them , could please please post the pics. Someironboy and others ?
[img]https://forum.bodybuilding.com/attachment.php?attachmentid=8737141&d=1503792803[/img]
Full 255lb set minus pair of 45's.
5 pairs of BFCO 100s for $125 pair.
[url]https://inlandempire.craigslist.org/spo/d/100-lb-olympic-barbell-weight/6196515043.html[/url]
Nautilus package (11 machines) up for sale, first and second generation stuff!
[url]https://cincinnati.craigslist.org/spo/d/11-classic-nautilus-machines/6277634282.html[/url]
Yesterday I saw a craigslist post in San Diego selling SML-2 squat stand with Rogue crossfit games competition bumpers (25kg and I think 15kg pair) for $340.
Amazing deal, but someone picked them up as soon as it was posted.
[QUOTE=vhd16;1517492091]Anybody experience with Superior barbell plates?
1. Are the holes machined?
2. If anybody has them , could please please post the pics. Someironboy and others ?[/QUOTE]
I owned a full set of those, GREAT plates and they seemed pretty accurate weight wise. At least much better cast than some of the older stuff like Billard and Canadian International, you could tell right away when picking them up that they were quality. Can't remember if they were machined holes, I think some of the plates were lightly machined on the back but not all of them (35's didn't I think).
[img]http://i.imgur.com/BurI935l.jpg[/img]
[img]http://i.imgur.com/7ldsVYFl.jpg[/img]
[img]http://i.imgur.com/IFcL7BTl.jpg[/img]
[img]http://i.imgur.com/ni0WZIOl.jpg[/img]
[QUOTE=urbanlifter;1517601761]Nautilus package (11 machines) up for sale, first and second generation stuff!
[url]https://cincinnati.craigslist.org/spo/d/11-classic-nautilus-machines/6277634282.html[/url][/QUOTE]
This guys in my area in Illinois - he's really posting that ad everywhere! He's had them for sale for awhile now, so someone might be able to talk him down (I think he started at around $11K for everything). I don't have room for everything, although I'd love to have a few of those pieces!
Has anybody ever tried the Double Chest machine?
[QUOTE=urbanlifter;1518012901]I owned a full set of those, GREAT plates and they seemed pretty accurate weight wise. At least much better cast than some of the older stuff like Billard and Canadian International, you could tell right away when picking them up that they were quality. Can't remember if they were machined holes, I think some of the plates were lightly machined on the back but not all of them (35's didn't I think).
[/QUOTE]
Tx. PM sent.
[QUOTE=swimmer32;1518014651]This guys in my area in Illinois - he's really posting that ad everywhere! He's had them for sale for awhile now, so someone might be able to talk him down (I think he started at around $11K for everything). I don't have room for everything, although I'd love to have a few of those pieces!
Has anybody ever tried the Double Chest machine?[/QUOTE]
Not sure about the chest machine, looks kinda weird, but that pullover needs bought ASAP!
we had the double chest (and probably everything else) in my HS weight room. I remember using it and thinking it was nice, but that was a long time ago and I didn't have anything to compare it to.
any idea on the make of these plates and the bar?
[url]https://kansascity.craigslist.org/spo/d/solid-steel-olympic-weights/6285688537.html[/url]
i'm not interested except out of curiosity. i haven't seen many cheap bars with a roll pin through the end and the plates look decently deep.
[QUOTE=Domicron;1518055191]any idea on the make of these plates and the bar?
[url]https://kansascity.craigslist.org/spo/d/solid-steel-olympic-weights/6285688537.html[/url]
i'm not interested except out of curiosity. i haven't seen many cheap bars with a roll pin through the end and the plates look decently deep.[/QUOTE]
Remember seeing them in vintage iron thread.
Found it . I would get those and get rid of the bar and the tree.
[url]https://forum.bodybuilding.com/showthread.php?t=147360213&p=1136957763&highlight=USA#post1136957763[/url]
York 25 KG bumpers for $110 in Phoenix.
[url]https://phoenix.craigslist.org/nph/spo/d/york-barbell-olympic-bumper/6262110486.html[/url]
[img]https://images.craigslist.org/00j0j_cjeKDAghzrz_600x450.jpg[/img]
Also a York power bar for $160.
[url]https://phoenix.craigslist.org/nph/spo/d/york-split-sleeve-olympic/6287969694.html[/url]
[img]https://images.craigslist.org/00c0c_i7usUmPk0hK_600x450.jpg[/img]
Powertec shape system - plate loaded crossover with bench for $250, any input/opinions? Couldn't find too much info on it on the forums and the "smaller" footprint would be nice
Other option is buying two valor BD-62 for around $400
A rusted? old looking Texas Power bar, apparently MAc version, on sale for $150.
[img]http://i.imgur.com/oLCwd8R.jpg[/img]
[img]http://i.imgur.com/gn9o14t.jpg[/img]
[img]http://i.imgur.com/AxbqN6W.jpg[/img]
I like power bars but not sure about this kind of condition.
[QUOTE=pbk3jg0;1518354911]A rusted? old looking Texas Power bar, apparently MAc version, on sale for $150.
[img]http://i.imgur.com/oLCwd8R.jpg[/img]
[img]http://i.imgur.com/gn9o14t.jpg[/img]
[img]http://i.imgur.com/AxbqN6W.jpg[/img]
I like power bars but not sure about this kind of condition.[/QUOTE]
In the time it took you to post these low rez photos I would have already scheduled a time to check it out.