The Official Craigslist Thread (Round 4)

[p0opstlnksal0t]

an airdyne will be last on the list if i even have enough room once i get my rack and other equip. not too mention about 1.5 hour drive one way. I'll pass on this one for now id lose money and not really worth my time to attempt to flip it an make 100 bucks

[RemainDieHard]

Over the past 3 years or so , I've bought 4 Airdynes ranging in price from $40 - $60 and sold all of them for $200 - $250. they're a great piece of equipment IMO and last forever. OP, if this was within an hour of me, I'd already have it in my garage.

About half of the used ones I've come across needed some sort of work, ranging from minor adjustments to replacing crank arms and wedge pins.

[irongrandpa]

About half of the used ones I've come across needed some sort of work, ranging from minor adjustments to replacing crank arms and wedge pins.

All the ones I've bought have been in good to great shape. My area is rated the most obese in the country so they probably weren't used much.

[RestoringTally]

About half of the used ones I've come across needed some sort of work, ranging from minor adjustments to replacing crank arms and wedge pins.

All the ones I've bought have been in good to great shape. My area is rated the most obese in the country so they probably weren't used much.

All but one that I've bought have been in great shape. The one had a crappy weld job done to the frame. I sold it to a cross-fit box, of all places. No telling how long it lasted. I believe all the rest were clothes-hangers before I got them.

[jormone]

Rack seems reasonable, and some bars look familiar

https://greensboro.craigslist.org/sp...547066187.html
power lift half rack - $650
power lift 0-90 bench - $250
Olympic 45 lb bars - $90

[Cleveland33]

That's one of my favorite racks right there

[RemainDieHard]

Rack seems reasonable, and some bars look familiar

https://greensboro.craigslist.org/sp...547066187.html
power lift half rack - $650
power lift 0-90 bench - $250
Olympic 45 lb bars - $90

That's a good price on the rack and bench. And a solid color scheme too. I wish I had a PL HR locally available when I downsized from my full PL rack.

[kllrbee]

https://milwaukee.craigslist.org/spo...549358710.html

Not sure if this goes here or CL dreamer thread.

Selling with the straps which have been pulled due to being defective. Kind of a dik move if u ask me.

Fwiw, I have the X3 stands, so im not trying to hate. I will use them until I can find a good deal on a legend or elitefts on CL, then Ill just put the X3 in the garage.

[kram1979]

What are your guys thoughts on this?

Powertec Dual hyper P-HC10 for $225

https://southjersey.craigslist.org/s...538866898.html

This is 5 minutes from me, which is nice. HC-10 looks to be the old model...latest versions look to be selling new for like $450

Currently have a Titan GHR which has been solid, but I've always liked 45 deg back extensions better & they take up less space. Been thinking about swapping it out for a 45deg.

[murphyreedus]

What are your guys thoughts on this?

Powertec Dual hyper P-HC10 for $225

https://southjersey.craigslist.org/s...538866898.html

This is 5 minutes from me, which is nice. HC-10 looks to be the old model...latest versions look to be selling new for like $450

Currently have a Titan GHR which has been solid, but I've always liked 45 deg back extensions better & they take up less space. Been thinking about swapping it out for a 45deg.

I got a slightly older version (different front foot design) through a flip:

https://www.amazon.com/Powertec-Fitn.../dp/B000P7ANRI

It's a solid bench. I got mine at no cost in a flip deal, but I'd say $150-200 seems fair for a used one. So far I've done hyper-extension deadlifts with up to 180, and I'm 245. Time will tell as I keep adding weight. There are a few for sale in the general area that have been sitting at $250+ for months. Amazon has a warehouse deals used newer model for $333 shipped right now. They also have the current model for $403 shipped:

https://www.amazon.com/Powertec-Fitn.../dp/B01N07F76L

[kram1979]

I got a slightly older version (different front foot design) through a flip:

https://www.amazon.com/Powertec-Fitn.../dp/B000P7ANRI

It's a solid bench. I got mine at no cost in a flip deal, but I'd say $150-200 seems fair for a used one. So far I've done hyper-extension deadlifts with up to 180, and I'm 245. Time will tell as I keep adding weight. There are a few for sale in the general area that have been sitting at $250+ for months. Amazon has a warehouse deals used newer model for $333 shipped right now. They also have the current model for $403 shipped:

https://www.amazon.com/Powertec-Fitn.../dp/B01N07F76L

Thanks! Glad you mentioned that about the added weight...I'm 220 & liked doing those as well. Nice to hear it's holding up.

[cwcmac]

Any northern Ohio/lower Michigan people looking for multi storage? Legend 3313 for $250. Not sure if the seller would budge on price but I'd jump on this for $200 if I needed something like this

https://toledo.craigslist.org/spo/d/...510360920.html

[easye7]

Hey guys - thoughts on these prices I am asking for?

Body-Solid Multi-Press Rack - $400
Powerblock (50# set with 70# expansion & stand) - $450
Lamar LS513 FID Bench - $100

[p0opstlnksal0t]

Anyone ever seen CAP plates like these? 500lbs with some cheap china bars locally for 350.00

[arkaa]

Hey guys - thoughts on these prices I am asking for?

Body-Solid Multi-Press Rack - $400
Powerblock (50# set with 70# expansion & stand) - $450
Lamar LS513 FID Bench - $100

Don't know anything about the rack, so no comment.

The Lamar LS513 is a pretty decent bench, a bit tall but otherwise quite capable. I think $100 is a good price. Depending on the condition of the bench and your location you can probably get more. If the finish & upholstery is good, I'd probably List it at $150 and see how it goes before dropping price.

Which Powerblock series? If it is U-series, then I think is a fair price. If it is the Elite or Sport series, then I think they may be a tad over-priced..... but you are also giving the stand so someone might bite. IMO, the PowerBlock stand is waaay over-priced to begin with - I wouldn't pay extra for the stand if I were buying but if the stand is included with the dumbbells then that might help the deal.

[easye7]

Don't know anything about the rack, so no comment.

The Lamar LS513 is a pretty decent bench, a bit tall but otherwise quite capable. I think $100 is a good price. Depending on the condition of the bench and your location you can probably get more. If the finish & upholstery is good, I'd probably List it at $150 and see how it goes before dropping price.

Which Powerblock series? If it is U-series, then I think is a fair price. If it is the Elite or Sport series, then I think they may be a tad over-priced..... but you are also giving the stand so someone might bite. IMO, the PowerBlock stand is waaay over-priced to begin with - I wouldn't pay extra for the stand if I were buying but if the stand is included with the dumbbells then that might help the deal.

Thanks for the response.

The bench has been pretty good for me. I think I paid $80 for it a couple years back. I believe there is a small tear in the seat pad. Maybe I'll bump that up to $125.

Good point about the stand. I do think it's crazy expensive considering what it is. Based on the Powerblock website, they look to be the Elite 5-50 set (square-shaped). Maybe knock the whole set down to $400 even? With the expansion, I paid less than $300 for everything...

I should say, I am getting rid of this stuff out of some degree of necessity. I'm not primarily flipping, but making a few bucks wouldn't hurt.

[urbanlifter]

Getting a strong 'It puts the lotion on the skin' vibe from this one, any takers? LOL

https://dayton.craigslist.org/spo/d/...550414910.html

[Cleveland33]

Getting a strong 'It puts the lotion on the skin' vibe from this one, any takers? LOL

https://dayton.craigslist.org/spo/d/...550414910.html

a circular saw blade on a stick?

That guy ain't making it past week 1 of the zombie apoc

[p0opstlnksal0t]

Getting a strong 'It puts the lotion on the skin' vibe from this one, any takers? LOL

https://dayton.craigslist.org/spo/d/...550414910.html

LOL those fabrication skills

[Stasher1]

LOL those fabrication skills

He screwed up posting pics without first filing for a patent. Titan's team of 8 year old barefooted welders is already hard at work building a cheaper, shoddier version.

[urbanlifter]

LOL, patents for sure! What worried me most was the 'want to share with you' comment, only on Craigslist!!!

[murphyreedus]

Getting a strong 'It puts the lotion on the skin' vibe from this one, any takers? LOL

https://dayton.craigslist.org/spo/d/...550414910.html

What fun is it if there's no risk of being turned into a lamp shade?

[urbanlifter]

What fun is it if there's no risk of being turned into a lamp shade?

I will say that's the one thing I REALLY like about ******** marketplace. I made a couple Craigslist runs before I got my CCW that could have went terribly wrong. The PB's I picked up Sunday was a more pleasant transaction, being able to basically look at the guy's profile and see all his personal information before meeting up is reassuring.

[urbanlifter]

Cincinnati folks, or those not too far away, full Hammer Strength racks w/bench for $700 a piece? Seems like a legit deal, no pics of the benches though.

https://cincinnati.craigslist.org/sp...548787572.html

[irongrandpa]

Cincinnati folks, or those not too far away, full Hammer Strength racks w/bench for $700 a piece? Seems like a legit deal, no pics of the benches though.

https://cincinnati.craigslist.org/sp...548787572.html

If I didn't have my Magnum rack, i'd be taking my wife to lunch in Cinncy.

[urbanlifter]

If I didn't have my Magnum rack, i'd be taking my wife to lunch in Cinncy.

Heck yeah, same boat here. He seems open to negotiation so I bet you could snag them both for $500-ish together by offering up an even $1k. Relisting with better pictures and fully assembled you might be able to get away with a free Hammer Strength setup, not a bad proposition

[BulkMore]

Cincinnati folks, or those not too far away, full Hammer Strength racks w/bench for $700 a piece? Seems like a legit deal, no pics of the benches though.

https://cincinnati.craigslist.org/sp...548787572.html

I love this rack. If I were close id gladly pay $700 for it. Depending on what kind of bench is included...this may be a steal...although $700 for the rack alone basically a steal.

[dskoo65]

LOL, patents for sure! What worried me most was the 'want to share with you' comment, only on Craigslist!!!

thats what i first noted. "sharing" isnt selling...is it? I think he has a freezer he want to "share" as well.

[Asjogren]

good deal on a beefy rack in Massachusetts...Looks like a Wynmor,York...looks heavy

https://worcester.craigslist.org/spo...550425370.html

[Deep-Voiced-One]

Got my 420 lbs of Ivanko 02B's on Easter and took a pic of them separated neater once unloaded off my sister's SUV, since taking a closer look at them I totally dig the old-school and traditional look of them so much that I'm gonna make these my rack plates and use the Troy GOs on the rower when I get it, also I'm gonna see if they'll ship out a pair of 2.5 lbs to complete the set...