The Official Craigslist Thread (Round 4)

[nnclark11]

https://akroncanton.craigslist.org/s...914187899.html

Gen 1 plate loaded nautilus pullover - $400

This is the most desirable of all the pullovers, and usually sell for 1k+ on Craigslist. So many good deals in Ohio.

Thanks for the link. Need to do a total refurb on this and the sp08 1st gen. Offered 300 more thinking I wasn’t first to reply and it worked. I owe you

[ampire]

my first commercial bench. i paid $300 and have zero regrets. it's probably better suited as a dumbbell bench. I prefer a wider pad for benching, but it's real heavy, it's pretty, and it's well made.

Yeah I tested one of them out a few years ago its a good design.



Here is an ironmaster stand for pretty cheap, if anyone in the MD area needs a dumbbell stand or just an equipment holder. https://baltimore.craigslist.org/spo...913549877.html

[JustTheDad]

Power-Lift adjustable bench for 250. Looks to be in great shape.
https://raleigh.craigslist.org/spo/d...906138871.html

[BulkMore]

Im surprised no on bought these yet, or maybe they did. Rh's for $0.73/lb

https://www.********.com/marketplace...9441639495616/

[cwcmac]

Any ever use this old trotter F/I bench. Thoughts?

Has a pin to support it as opposed to a pop pin or ladder system. Seems like they kept the frame design with Cybex but changed the pin mechanism

[SomeIronBoy]

Any ever use this old trotter F/I bench. Thoughts?

Has a pin to support it as opposed to a pop pin or ladder system. Seems like they kept the frame design with Cybex but changed the pin mechanism

Heavy af bench. Wheels are also ball shaped which is weird and I don't care for it much because the ones I've tried pads are squishy. But that could be just the bench I used, from heavy use overtime

[urbanlifter]

Certain areas of the country seem to be the mecca of gym equipment deals and Ohio is definitely one of them. I might have made the drive had I seen that 7 days ago.

Columbus Ohio specifically, home of the legendary KEETMAN! Here is more proof, $300 for this bad boy.....



https://columbus.craigslist.org/spo/...915782652.html

Then check this bad@ss rack, that price is on point for a commercial setup!



https://columbus.craigslist.org/spo/...915776281.html

[irongrandpa]

Columbus Ohio specifically.

Then check this bad@ss rack, that price is on point for a commercial setup!



https://columbus.craigslist.org/spo/...915776281.html

You are right of coarse, BUT, for only $250 more you could get a Titan rack with no plate storage or landmine.

[Duplicitous]

You are right of coarse, BUT, for only $250 more you could get a Titan rack with no plate storage or landmine.

So for more money you could get a significantly lesser rack. I own a few Titan accessory pieces and must say I wouldn't trust those welds when lifting alone in the basement of my rural home. None of the accessory pieces I have bought have been powder coated either. They're just spray painted. :/

[urbanlifter]

You are right of coarse, BUT, for only $250 more you could get a Titan rack with no plate storage or landmine.

OR, they could have bought my old Magnum rack for $300 that someone is now trying to flip on CL for $900. Similar deal to the Sorinex one OSU picked up that I posted about, would have been a KILLER deal for someone wanting a rock solid setup @ less than Titan prices.

[irongrandpa]

My point was to say you can find awesome deals on used commercial racks and not spend more than you would on cheap new stuff.

[JustTheDad]

If anyone has a ton of space and wants to split up this:
https://www.********.com/marketplace...1927421281241/

13 pieces of Freemotion equipment including a cable crossover for $3900 total. Janelle needs the space.

IronGrandpa,
I appreciated the sarcasm.
Todd

[urbanlifter]

My point was to say you can find awesome deals on used commercial racks and not spend more than you would on cheap new stuff.

I figured that was your point...

[solarfuel]

https://kpr.craigslist.org/spo/d/ken...917985540.html

https://kpr.craigslist.org/spo/d/ken...917996785.html

Ivanko and rogue bumper plates - $1/lb

Ivanko OM and other misc steel - $.60/lb

Nice deal in Washington state

[dskoo65]

thinking of picking this lat machine up. guy says brand is spirit. anybody ever used one. looks like the mechanism would be very smooth but ive never seen a carriage like that. Im assuming the carriage was replaced at some point, unless the manufacturer bizarrely went with a two color scheme. i did some research but came up with squat about this particular unit.

[MikeNick]

With pulleys the movement must be very smooth. This kind of mechanism is what I want to do with an old lat machine I own for about 30 years (seen below). The movement runs basically on friction so I have bought 4 pulleys to make it like the one you ask. The only think I don't like much is the open upper part of the carriage. With some weight in it it may bend (?)
If the price is ok I would buy it.

[OSUDimond]

Columbus Ohio specifically, home of the legendary KEETMAN! Here is more proof, $300 for this bad boy.....



https://columbus.craigslist.org/spo/...915782652.html

Then check this bad@ss rack, that price is on point for a commercial setup!



https://columbus.craigslist.org/spo/...915776281.html

Just listed the matching half rack today also. In the last few years the price I can sell racks for has plummeted. I think the majority of people just compare to Rogue prices and wont consider paying more than Rogue even if it's justified. Thanks for being my hype man selling stuff for me lol.

[JustTheDad]

https://www.********.com/marketplace...ssenger_banner

$400 or less for a paramount FT seems like a good deal. She sent me more pics, and it doesn't appear to have rusted yet. Guess she needs it gone. Unfortunately, it won't fit in my gym.

[solarfuel]

https://www.********.com/marketplace...7564552055835/

Atlantis Chest Press - p140 - $300

[ampire]

Paramount Commercial Incline Adjustable Bench $65 Baltimore MD
https://baltimore.craigslist.org/spo...927354081.html

[dskoo65]

detroiters. $45. Precor Icarian bench? a little well used but for that price, so what.

https://www.********.com/marketplace...5428081739277/

[Liquidsilver96]

Looking for advice on if this power rack is any good. The buyer doesn't know the brand or any info. He is asking $180, I figure I can talk him down to $150 or lower.

[SomeIronBoy]

Looking for advice on if this power rack is any good. The buyer doesn't know the brand or any info. He is asking $180, I figure I can talk him down to $150 or lower.

It's Northern Lights. A Great Deal at $180 Honestly

[Liquidsilver96]

It's Northern Lights. A Great Deal at $180 Honestly

You are the reason I love the internet. I had been searching through google images for hours and couldn't find an exact match, and it driving me crazy. Thank you so much.

[ampire]

https://baltimore.craigslist.org/spo...929244824.html

50 lb powerblock rexan $75

[JustTheDad]

Maybe for you really strong guys. If this were 40,45,50,55,60, I'd get them. But it's 70, 75, 80, 90,100lb Ivanko Dumbbells, pairs, for $400.
Seems like a good price, right?
Just under $0.50/lb ?
https://www.********.com/marketplace...1297821388719/

[solarfuel]

https://chicago.craigslist.org/nwc/s...931660848.html

Nebula linear leg press - 2250 - Chicago

[BulkMore]

https://chicago.craigslist.org/nwc/s...931660848.html

Nebula linear leg press - 2250 - Chicago

Pictures available upon request. wtf kind of logic is that? how difficult is it to post a picture or two? cant fix stupid.

[solarfuel]

Somebody should snatch this up QUICK. $35 for an Atlantis Dip Station in Allendale NJ. One of the best dip stations ever made. Super versatile, check it out on the cost no object thread.

https://www.********.com/marketplace...6176020765478/

[ArnoldHAMnEGGer]

Somebody should snatch this up QUICK. $35 for an Atlantis Dip Station in Allendale NJ. One of the best dip stations ever made. Super versatile, check it out on the cost no object thread.

https://www.********.com/marketplace...6176020765478/

is it really gone already? that's an amazing pickup!