Pics also posted in the Cost No Object Thread. It's been an ambition of mine to pick up some Panatta equipment for some time, the strange thing is that the covid Pandemic was the catalyst for this purchase.
With the commercial equipment sector under pressure, Panatta decided to offer some very large discounts, the opposite is true for the used market, I traded out some of my Watson and Hammer Strength machines at very favourable prices, the balance between the new Panatta pieces and the units I sold on the used market was surprisingly small.
Panatta Deltoid Press
Panatta Power Squat
Panatta Vertical Chest Press
Panatta High Row
|
-
11-08-2020, 12:51 PM #3931
-
11-08-2020, 02:31 PM #3932
-
-
11-11-2020, 09:15 AM #3933
-
11-11-2020, 09:40 AM #3934
-
11-11-2020, 10:47 AM #3935
-
11-11-2020, 02:05 PM #3936
-
-
11-14-2020, 11:41 AM #3937
-
11-14-2020, 03:46 PM #3938
-
11-15-2020, 09:49 AM #3939
-
11-15-2020, 11:41 AM #3940
-
-
11-16-2020, 07:34 PM #3941
Finished putting together my new Rogue Rhino today..Never tried a belt squat before so I played with it for while . Nice machine .Really hits the legs and it seems like it can be pretty versatile for other things using cable attachments . Can’t wait to start using it.
Couple of very minor issues that I should point out. First issue is the length of the machine screws that hold the plate around the platform opening. They are a bit too short and barely grab a thread so I just grabbed 4 1/4-20 x 3/4” long stainless machine screws for $5.
Last issue is just me nitpicking as it’s about the stupid stickers. The front warning sticker is tilted and so are the Rhino Stickers. Pretty easy to put these on straight so I’m guessing they must be crazy busy trying to get stuff out the door.
-
11-17-2020, 03:26 AM #3942
-
11-17-2020, 05:03 AM #3943
-
11-17-2020, 07:15 AM #3944
Little stuff like that bugs me also, especially at Rogue's pricing. I ordered an RML-490 a couple years ago on MBF and my stickers were also skewed. I had some other issues as well and the initial shoulder-shrug response from Rogue had me fuming. However, the ticket was escalated to someone else a couple days later and everything was sorted out. Overall, they're still one of the better companies in the industry to deal with in my experience though my bar is set pretty low after dealing with the likes of Vulcan and BWTG.
-
-
11-17-2020, 01:25 PM #3945
I hear ya..$2000 grand is not cheap so I expected more.. this was my first Rogue piece as I think they are overpriced even at the used market but the Rhino had a lot to offer and it fit in my space.
The machine itself is well designed and is a really nice machine. It’s a minor thing about the stickers but it shouldn’t even be an issue..The short machine screws is a little concerning as it’s a cheap fix and I’m not the only one that noticed it. I saw a you tube video about it.They just barely grab so 1/4” longer is a real easy fix.
-
11-22-2020, 03:54 PM #3946
-
11-22-2020, 04:03 PM #3947
-
11-22-2020, 06:36 PM #3948
-
-
11-27-2020, 02:56 PM #3949
-
11-28-2020, 04:43 AM #3950
-
11-28-2020, 06:47 AM #3951
-
11-28-2020, 07:02 AM #3952
-
-
11-28-2020, 01:07 PM #3953
Still pretty sparse around here. These were for what a normal price would have been a year ago and 5 minutes away, so I wasn't going to pass them up especially since I can flip the dregs for a few bucks. The split sleeve bar is pretty straight, too, which is always surprising. Single set screw holding each donut on, no branding on it.
-
11-28-2020, 06:11 PM #3954
-
11-30-2020, 05:55 PM #3955
I wanted a pull up bar with Knurled handles. So tried with my local welder. I could have gone with 1.5 pipe ( OD 1.9") on the back bar but i don't think we will be using that very much. Already regular 1.25" rogue pull up bar. I am really impressed with knurling. He forgot to put the knurling on the front bar between the neutral handles. Cost wise I would say it is lot cheaper than Dean's one which is without knurling.
All the 4 neutral handles are knurled and the front angled portion.
This is for Rogue Monster rack. It needs to cleaned as it has some shop dust on it. I am plan on leaving it like the way it is for now. Need to find a textured or non slip Red paint for future . Any suggestions ?
[M]===[6]▪ Mech6 Crew #35 ▪[M]===[6]
[]------[] York Barbell Club #80 (DD)[]-----[]
-
12-02-2020, 01:52 PM #3956
-
-
12-02-2020, 03:40 PM #3957
- Join Date: Sep 2011
- Location: Knoxville, Tennessee, United States
- Age: 68
- Posts: 1,732
- Rep Power: 26354
O─O York Barbell Crew #53 O─O
─█────█─ Ivanko Barbell Crew #63 ─█────█─
─────────────────────────────────────────────────────────
My goal is to have so much equipment that I don't have room to workout. I am almost there. :)
──────────────────────────────────-───────────────────────
1st Meet Nov 2014 Push-Pull: 225 - 325 @ 194 Masters 59
-
12-02-2020, 06:57 PM #3958
-
12-03-2020, 05:46 AM #3959
-
12-03-2020, 08:41 AM #3960
Similar Threads
-
*** Consider this an invitation....to the Gangsta Nation: Deux****
By KingOfChaos in forum Misc.Replies: 9092Last Post: 10-04-2009, 02:50 PM
Bookmarks