Misc Firearms Crew LV: Come for the Guns, Stay for the Grammar Lessons

[4ea]

Rule 1: Don't come in here to troll or bash firearms owners. You will be swiftly negged.
Rule 2: Don't be afraid to ask questions, but do a little research on your own first. Semi-intelligent questions are welcome.
Rule 3: Do simply not ask what gun you should buy for concealed carry. This question is very difficult to answer as individual needs and preferences vary greatly, and we're all tired of repeating ourselves. Do some research first, even if it's just reading the MFC for awhile, or searching gun forums to get a general idea.
Rule 4: DON'T BASH OTHER POSTERS ABOUT THEIR PURCHASES.
Rule 5: Do NOT link to any illegal firearms instructions or sites.
Rule 6: DO NOT THREATEN OTHER POSTERS.
Rule 7: FIRST PAGE POSTS MUST CONTAIN A PIC OF A FIREARM. YOU WILL BE NEGGED IF YOU FAIL THIS RULE


FOUR RULES OF SAFE GUN HANDLING:
1. All guns are always loaded.
2. Do not allow the muzzle to point at anything you are not willing to destroy.
3. Keep your finger off the trigger until your sights are on the target.
4. Know your target and your backstop.

Valuable links and resources
Information
www.opencarry.org
www.handgunlaw.us <--Check here for your state's carry laws and instructions on how to apply for a carry license!
www.guncite.com
www.theboxotruth.com
www.appleseedinfo.org
appleseedinfo.org/search-states-map.php
home.nra.org
www.brassfetcher.com

Good places to order ammunition (and other stuff)
slickguns.com
wikiarms.com
gunbot.net
sgammo.com
aimsurplus.com
natchezss.com
tds-us.com
midwayusa.com
cabelas.com

Gun forums to visit, search, post in, etc.
www.defensivecarry.com
www.thehighroad.org
www.m4carbine.net
www.xdtalk.com
www.glocktalk.com
www.ar15.com
www.calguns.net/
www.rimfirecentral.com

Other good online retailers of ammunition, firearms, accessories, etc
bravocompanyusa.com
palmettostatearmory.com
primaryarms.com
botachtactical.com
riflegear.com
jgsales.com
windhamweaponry.com
rainierarms.com
brownells.com
opticsplanet.com
grabagun.com
classiccityfirearms.com

Belts and holsters (a GOOD stiff carry belt is critical to carrying comfortably day in and day out, trust us)
www.comp-tac.com
www.thebeltman.net
www.thewilderness.com
www.miltsparks.com
www.whitehatholsters.com
www.crossbreedholsters.com


For California
www.calgunsfoundation.org/
www.gunownersca.com/
www.calgunlaws.com/

OUR LEGACY:

Misc Firearms Crew: If you own/like guns GTFIH (uracowman)
Misc Firearms Crew II: Aye' Bro, Throwing You a Mag (uracowman)
Misc Firearms Crew III: Covering Fire! (LAWLER89)
Misc Firearms Crew IV: Dial "0" For Operator (LAWLER89)
Misc Firearms Crew V: What AR-15 should I get? How about a Mosin 91/30 and some ammo (Farley1324)
Misc Firearms Crew VI: Shh, no shooting... only hoarding now (Hola Bola)
Misc Firearms Crew VII: Backordered Until 2016 (Hola Bola)
Misc Firearms Crew VIII: Prices droppin, flippers floppin. (Farley1324)
Misc Firearms Crew IX: In b4... the Ban (proconsul)
Misc Firearms Crew X: We prefer dangerous freedom over peaceful slavery (hutch1999)
Misc Firearms Crew XI: In after... the bans (chevy72blu)
Misc Firearms Crew XII: I'm from the government, and I'm here to help (joecam18)
Misc Firearms Crew XIII: Banned Of Brothers (nick911sc)
Misc Firearms Crew XIV: Obamakua, Tactical Thumbs, Broken Ankles, and Plastic AK's. (nick911sc)
Misc Firearms Crew XV: I Salute the homie that did that (erick15)
Misc Firearms Crew XVI: Love that thread, but man Farley is a prick (Farley1324)
Misc Firearms Crew XVII: Livebrah - can we see your guns yet? (R3L3NTL3SS)
Misc Firearms Crew XVIII: If I had a son, he would look like Geoff... believe that. (back2bassiks)
Misc Firearms Crew XIX: Aloha from the Snackbar in Syria.(2k10SS)
Misc Firearms Crew XX: From Deep Behind Enemy Lines; California, You Ignorant Sloot(hpdcoop)
Misc Firearms Crew XXI: Vendettas & Bromances(BlueNinjaGo)
Misc Firearms Crew XXII:Zero Dark Farley(tmac2206)
Misc Firearms Crew XXIII: Secret Santas and Grammer Fights(Joecam18)
Misc Firearms Crew XXIV: The Real Housewives of Operator County/Banned of Brothers II(Goldbrah)
Misc Firearms Crew XXV: Tactical Tedds, Tiny Convo, Reporting Reporters, No Livebrah (PizzaForCutting)
Misc Firearms Crew XXVI: In Memory of Comrade Kalashnikov никогда не забыли (LAWLER89)
Misc Firearms Crew XXVII: The Battle of Igmann's Bulge/Banned Of Brothers III(tactical45)
Misc Firearms Crew XXVIII: Back from the brink, operating at full strength(Dan***er)
MISC Firearms Crew XXIX: Head of Household Since 2011(AZLiftBrah)
Misc Firearms Crew XXX: You Can't Handle Our Loads(CdtCox)

Misc Firearms Crew XXXI: We don't have a chart, but we've been Blumped(ABSPR)

Misc Firearms Crew XXXII: R3PORT3D 4 Duty(HOLA)

Misc Firearms Crew XXXIII: Accepting applications (Tactical45)

Misc Firearms Crew XXXIV: Back at full strength, but at what cost? (OrificeSpunk)

Misc Firearms Crew XXXV: Don't own a 1911? What's it like to be poor? (Mauser88)

Misc Firearms Crew XXXVI: MFCXXXVI: Proposal Fails, Troy Rails, and Half Off Sales (And FF) (blumpkin415)

Misc Firearms Crew XXXVII: Detaining Canucks. Giving 0 Phucks (tmac2206)

Misc Firearms Crew XXXVIII:Phantasizing *******s with Phirearms (Jason_bh)

MFC XXXIX: I think these are rubber bullets, can someone please confirm? (abandonedship)

Misc Firearms Crew XL: The XL is not a Roman numeral, know what we're sayin? (PizzaForCutting)

Misc Firearms Crew XLI: Colorado sucks and the Libs live in Farleyville (GingerBrah84)

Misc Firearms Crew XLII: If nobody enforces it, is it still Gun Control? (Ikeman83)

Misc Firearms Crew XLIII: Aloha, snackbars and prosperity(YouGunShowTix)

Misc Firearms Crew XLIV: Buying more guns…and we’d run on 2nd & goal (PapaBurgandy)

Misc Firearms Crew XLV: Penetrators and Breast Milk; From Armor Piercing to Nipple Piercing (MoeBettuh)

Misc Firearms Crew XLVI: 10mm>44mag, it’s science (PapaBurgandy)

Misc Firearms Crew XLVII: We've got a guy from Harvard. Shut up. (MoeBettuh)

Misc Firearms Crew XLVIII: If guns kill people then all mine must be defective (R3L3NTL3SS)

Misc Firearms Crew XLIX: Pin was an operator before it was cool (CWeber21)

Misc Firearms Crew L: Cogito, ergo sum armatus: I think, therefore I am armed. (ABSPR)

Misc Firearms Crew LI: Locked and loaded for economic apocalypse. (YourGunShowTix):
http://forum.bodybuilding.com/showth...hp?t=168760833

Misc Firearms Crew LII: Snappin' Necks and Background Checks (DualRectifier) http://forum.bodybuilding.com/showth...63&pagenumber=

Misc Firearms Crew LIII: Beverly Hills 6920 (TylerA120)

Misc Firearms Crew LIV: Inb4 the ban, part 3.(YourGunShowTix)

[MoeBettuh]

inn

Funny Story.

I would figure Gun enthusiast would welcome a newbie who is looking to get into the hobby. And help him understand things. Guess maybe a lot of the stereotypes are true.

lel jakes on you. I will learn, and I will carry whichever gun I decide. Obviously just wont have too many friends from here I guess.

Edit: You probably run a ****ty business too. Remind me never to check it out

Thnx brah. Definitely the plan. I'll post around as I get more experience and gather more info.

Ah well you know my Wording on a lot of these things is wrong. But I think you know what I mean. Common sense for a newb says a .45 will do in 1 bullet which a 9mm will do in 2.
But I do understand now for the purpose of self defense a 9mm seems to be one of the best rounds.

9mm > .45acp, not just for CC


We welcome people new to shooting and guns, bruh. Trust me. And you don't have to "fall in line" with what the majority of us believe, but we've come to some common conclusions for a reason. Good luck w/ your search. If it were me, I'd skip the horse**** and just get a Glock 19.

[El Fuerte]

Hello MFC

[PapaBurgandy]

[rtm0004]

oh hi guis



new official MFC rofl

[4ea]

Hello MFC

[SugarFree1]

In

Bill allows suits over gun-free zone incidents
http://www.tennessean.com/story/news...ents/78862948/

[TheLBM]

We want to buy a Mazak 5 axis machine.

Mazak makes the sickest CNC's out there IMO.
It would just be so expensive for us. Not only would we have to buy the machine which is more than most peoples houses, but all our tool holders are all Haas CAT 40.

CAT 50 are the shtt!! It is night and day between the 2.
I have drilled straight thru 3" of CRS with a 2.75 dia drill
500 SFM .005 per tooth (1 tooth cutter) with a Sandvic inserted dr.
Didnt even max out the machine

Programming at the machine? Or offline?

95% offline
I have used
GIBBS << I LOVE that cad/cam
Master Cam
and Surf cam

[EdSTI]

IN MFC master race

[R3L3NTL3SS]

In.

[Steve707]

According to libs this is an assault weapon.

[R3L3NTL3SS]

CAT 50 are the shtt!! It is night and day between the 2.
I have drilled straight thru 3" of CRS with a 2.75 dia drill
500 SFM .005 per tooth (1 tooth cutter) with a Sandvic inserted dr.
Didnt even max out the machine

95% offline
I have used
GIBBS << I LOVE that cad/cam
Master Cam
and Surf cam

We use Gibbscam probably 90%. Some stuff is drawn in Solidworks though. Depending on what the part is Solidworks is just easier to draw some things up in.

[4ea]

In.

Im myron all your work man, but im especially myron this. Id been meaning to eventually buy a chromed out glock.

not too sure about the caliber doe

According to libs this is an assault weapon.

they just... dont understand.

any inanimate object can be used as a weapon to criminally assault someone. arbitrarily labeling some types of inanimate objects as "assault weapons" is attempting to play off emotion to instill fear in people and stop the logical thought process.

[R3L3NTL3SS]

i've never shot a CZ. Are they this good across the entire line? Or is the SP-01 just a whole different ballgame

Pretty much all CZ's are known for crazy accuracy. It has to do with the slide-in-frame design and all. But yeah, the SP-01's and CZ's other competition oriented pistols are just on their own level in terms of accuracy, the triggers, etc.

There's a guy on the CZ forums who shoots a CZ P-09 in bulls eye comps and places ahead of guys shooting $3,000 custom 1911's. That's a $500 gun with about $200 in trigger work. Absolutely nothing done as far as tightening barrel lock up, etc. That's all stock.

[R3L3NTL3SS]

Im myron all your work man, but im especially myron this. Id been meaning to eventually buy a chromed out glock.

not too sure about the caliber doe

Actually the first pic is what it looked like before. The guy apparently attempted to polish it, etc and it looked like hell. He spray painted the frame black, which was peeling off as seen in the pic. A LGS had bought it from the guy for like $250 and couldn't sell it in it's condition so they brought it to us to work it over. I believe they ended up selling it for $700 not even a week after they got it back and put it in their case. (srs)

[Farley1324]

In.

[mm394006]

What's up jagoffs?

[4ea]

Actually the first pic is what it looked like before. The guy apparently attempted to polish it, etc and it looked like hell. He spray painted the frame black, which was peeling off as seen in the pic. A LGS had bought it from the guy for like $250 and couldn't sell it in it's condition so they brought it to us to work it over. I believe they ended up selling it for $700 not even a week after they got it back and put it in their case. (srs)

oh sh_t yea. i just noticed the screwed up frame.

looks like im not wasting any time making potato comments today.

lol

the after pic looks flawless though.

[TheLBM]

We use Gibbscam probably 90%. Some stuff is drawn in Solidworks though. Depending on what the part is Solidworks is just easier to draw some things up in.

You can open a .sldprt in Gibbs easily, I am sure you know that already tho.
I have never tried to generate tool paths with SW, dont even know if you can TBH
much post code to the machine with it,

[blumpkin415]

IN!

[R3L3NTL3SS]

You can open a .sldprt in Gibbs easily, I am sure you know that already tho.
I have never tried to generate tool paths with SW, dont even know if you can TBH
much post code to the machine with it,

That's what we do.

the after pic looks flawless though.

Thanks man.

[OscarDownUnder]

[4ea]

You can open a .sldprt in Gibbs easily, I am sure you know that already tho.
I have never tried to generate tool paths with SW, dont even know if you can TBH
much post code to the machine with it,

Solidworks is one of the greatest programs ever written, using it makes me feel like a kid with virtual legos.

[R3L3NTL3SS]

Solidworks is one of the greatest programs ever written, using it makes me feel like a kid with virtual legos.

Ever played with GibbsCam? GibbsCam is amazing.
Although I guess if all you're doing is drawing solid models you probably wouldn't have used it before.

[TheLBM]

Ever played with GibbsCam? GibbsCam is amazing.
Although I guess if all you're doing is drawing solid models you probably wouldn't have used it before.

What version do you have?
3D modeling?
the most my boss would get was solid imports

[BrbBowflexing]

In

[4ea]

Ever played with GibbsCam? GibbsCam is amazing.
Although I guess if all you're doing is drawing solid models you probably wouldn't have used it before.

Cant say that I have, closest thing Ive done is exporting solidworks drawings to .dxf format and importing those into torchmate software to be torch cut out in 2D for plate and sheet metal.

[mm394006]

words with no pictures

Do you even Rule 7??
Where is pizza when you need him ayyy








LBM, if you could in the future leave the old thread open until this one gets to a full page. Sometimes it takes awhile to get enough posters to fill up the first page and that lets us keep bickering in the meantime and avoid these serious infractions.

[R3L3NTL3SS]

What version do you have?
3D modeling?
the most my boss would get was solid imports

Just Gibbscam V10. It was expensive enough. lol

[DennisR1977]

In.