Misc Firearms Crew XXXIV: Back at full strength, but at what cost?

[Farley1324]

Have any of you guys had an issue fitting an upper on a lower?

I bought a Franklin Armory stripped lower a long time ago. When I bought my first PSA upper I attached it to the FA lower to see how it would fit (even though I planned to use that upper on a different lower) and it did not fit. I had forgotten about that. I just tried putting my BCM upper on the lower and had the same issue.

Here's a pic with my pushing them together.

[IMG]http://i58.tinypic.com/2qstoba.jpg[IMG]

Not sure if I need to shave off some or if I should contact FA. I may be able to find the receipt but I have no idea. I bought it from a LGS. The rear tightening screw or whatever it's called is all the way down, it's not getting caught up on that and I can't exactly tell where it's getting caught at.

I have another stripped lower of the same brand as my PSA rifle. I might just throw the BCM on there and that way I can just get a new quality LPK. Just not sure what to do with the FA lower.

Who the hell is franklin armory?

[RThoe]

Who the hell is franklin armory?

http://www.franklinarmory.com/PRODUCTS.html

[Farley1324]

http://www.franklinarmory.com/PRODUCTS.html

I guess the underlying question is: Why buy a lower from Franklin Armory given all of the other proven and well priced options out there?

[RThoe]

I guess the underlying question is: Why buy a lower from Franklin Armory given all of the other proven and well priced options out there?

This was just after Sandy Hook. The LGS was fresh out of all stripped lowers. Called me the next day saying they got some FA in so I went to check them out and they were manufactured in my hometown. Thought it was cool that it had my hometown on the lower.

Plus, a lower is a lower is a lower right?

[litljay]

I guess the underlying question is: Why buy a lower from Franklin Armory given all of the other proven and well priced options out there?

Doesn't really matter now since he's already bought it.

I'd give FA a call and see what they say.

[Farley1324]

Plus, a lower is a lower is a lower right?

And PSA makes quality, consistent parts with attention to detail and prompt customer service.

Agree with above. Contact them and see what they say/if they offer a replacement. Email them pics, I'd say.

[|progress|]

Franklin Armory actually builds decent stuff. If it's not your buffer tube, then I'd be on the phone with them to solve the problem.

[PapaBurgandy]

Franklin Armory actually builds decent stuff. If it's not your buffer tube, then I'd be on the phone with them to solve the problem.

I would bet on the tube being threaded too far in. I had that problem with the first lower I built. Looked exactly like that.

[Farley1324]

This was just after Sandy Hook. The LGS was fresh out of all stripped lowers. Called me the next day saying they got some FA in so I went to check them out and they were manufactured in my hometown. Thought it was cool that it had my hometown on the lower.

Plus, a lower is a lower is a lower right?

Who made the receiver extension/what is the RE?

[spirit750]

http://palmettostatearmory.com/index...m_medium=email


Just saying...

[joecam18]

http://palmettostatearmory.com/index...m_medium=email


Just saying...

[Lawson45]

St.Louis sucks.

das why i immigrated to the south.

brb, freedoms, food and fine ladies

yep I mire the FDE but this makes me moist





mebe get for christmas this year. not sure if want slide or frame to have Kryptek tho. Definitely not both lol

[OrificeSpunk]

10 pack of pmags for abot $8.80 each shipped
http://dsgarms.com/dsgholidaypk1



oh and

[4ea]

http://brethrenarms.com/product/bap-9mm/

never heard of it, but i like it, especially with that rail on the top. HK94 receivers typically dont come like that.

not too sure about the forearm guard though. that plain stock configuration is perfect imo.

[Igmann]

And PSA makes quality, consistent parts with attention to detail and prompt customer service.

Agree with above. Contact them and see what they say/if they offer a replacement. Email them pics, I'd say.

You were out a few days when I posted my AR build plan (towards the end of the last thread)... Welp, I wanted your input but bought anyway regardless. What are your thoughts?

Spikes Tactical Complete Lower: http://www.brownells.com/rifle-parts...prod31719.aspx

BCM 14.5 Upper: http://www.bravocompanyusa.com/BCM-1...4-12-cosmo.htm

BCM Charging Handle: http://www.bravocompanyusa.com/BCM-G...%203%20556.htm

BCM BCG: http://www.bravocompanyusa.com/BCM-B...up-auto-mp.htm

BCM Vert Short Grip: http://www.bravocompanyusa.com/BCM-G...vg-s-black.htm

DD Offset Light Mount: *****://www.bravocompanyusa.com/ProductDetails.asp?ProductCode=DD-6001

And some DD Fixed Sights

No optic will be on this rifle. Am I going to make it?

I'll have pics posted mid next week

[Kicker9]

I'm flying to Farley land in the morning. Working all day Thursday, Friday, and Saturday. Hopefully half a day Sunday. Anyone have restaurant suggestions. I'll primarily be near perimeter mall.

The weather is supposed to suck, so how's the traffic gonna be. Couldn't be much worse than DFW.

[Lawson45]

oh and

finally, a gun I can use like this

[WrinklyGrandma]

You were out a few days when I posted my AR build plan (towards the end of the last thread)... Welp, I wanted your input but bought anyway regardless. What are your thoughts?

Spikes Tactical Complete Lower: http://www.brownells.com/rifle-parts...prod31719.aspx

BCM 14.5 Upper: http://www.bravocompanyusa.com/BCM-1...4-12-cosmo.htm

BCM Charging Handle: http://www.bravocompanyusa.com/BCM-G...%203%20556.htm

BCM BCG: http://www.bravocompanyusa.com/BCM-B...up-auto-mp.htm

BCM Vert Short Grip: http://www.bravocompanyusa.com/BCM-G...vg-s-black.htm

DD Offset Light Mount: *****://www.bravocompanyusa.com/ProductDetails.asp?ProductCode=DD-6001

And some DD Fixed Sights

No optic will be on this rifle. Am I going to make it?

I'll have pics posted mid next week

Looks good. I'd go with a Mod4 though. Although I've never used a Mod3, I'd be worried it'd snag on me when slung.

[Igmann]

Looks good. I'd go with a Mod4 though. Although I've never used a Mod3, I'd be worried it'd snag on me when slung.

One of my annoyances with the ARs is the size of the charging handle. You don't really have a lot to hold onto when wearing gloves, so that's why I went with the large latch.

[OrificeSpunk]

You were out a few days when I posted my AR build plan (towards the end of the last thread)... Welp, I wanted your input but bought anyway regardless. What are your thoughts?

Spikes Tactical Complete Lower: http://www.brownells.com/rifle-parts...prod31719.aspx

BCM 14.5 Upper: http://www.bravocompanyusa.com/BCM-1...4-12-cosmo.htm

BCM Charging Handle: http://www.bravocompanyusa.com/BCM-G...%203%20556.htm

BCM BCG: http://www.bravocompanyusa.com/BCM-B...up-auto-mp.htm

BCM Vert Short Grip: http://www.bravocompanyusa.com/BCM-G...vg-s-black.htm

DD Offset Light Mount: *****://www.bravocompanyusa.com/ProductDetails.asp?ProductCode=DD-6001

And some DD Fixed Sights

No optic will be on this rifle. Am I going to make it?

I'll have pics posted mid next week

did you already buy the complete lower? You should be able to assemble one yourself with a match trigger for a little more

[Farley1324]

You were out a few days when I posted my AR build plan (towards the end of the last thread)... Welp, I wanted your input but bought anyway regardless. What are your thoughts?

Spikes Tactical Complete Lower: http://www.brownells.com/rifle-parts...prod31719.aspx

BCM 14.5 Upper: http://www.bravocompanyusa.com/BCM-1...4-12-cosmo.htm

BCM Charging Handle: http://www.bravocompanyusa.com/BCM-G...%203%20556.htm

BCM BCG: http://www.bravocompanyusa.com/BCM-B...up-auto-mp.htm

BCM Vert Short Grip: http://www.bravocompanyusa.com/BCM-G...vg-s-black.htm

DD Offset Light Mount: *****://www.bravocompanyusa.com/ProductDetails.asp?ProductCode=DD-6001

And some DD Fixed Sights

No optic will be on this rifle. Am I going to make it?

I'll have pics posted mid next week

Looks like it will be a fine rifle.

Did you just go with the standard buttstock offered with the lower from Brownells?

I'm flying to Farley land in the morning. Working all day Thursday, Friday, and Saturday. Hopefully half a day Sunday. Anyone have restaurant suggestions. I'll primarily be near perimeter mall.

The weather is supposed to suck, so how's the traffic gonna be. Couldn't be much worse than DFW.

Consider driving into the city for Fogo De Chao. http://www.fogodechao.com/locations/atlanta

Make reservations.

[GingerBrah84]

Looks good. I'd go with a Mod4 though. Although I've never used a Mod3, I'd be worried it'd snag on me when slung.

One of my annoyances with the ARs is the size of the charging handle. You don't really have a lot to hold onto when wearing gloves, so that's why I went with the large latch.

Mod3 crew checking in. I love it.

[itsnotjon]

Just went and shot the G19, 50 rounds, 7 yards, "Dot Torture" drill.
Last 3 times at 5 yards : 49/50, 50/50, 50/50


31/50.
Worst shooting I've ever done, srs. I don't even.
Blaming TulAmmo and Monster energy.

[Yeti06]

Just went and shot the G19, 50 rounds, 7 yards, "Dot Torture" drill.
Last 3 times at 5 yards : 49/50, 50/50, 50/50


31/50.
Worst shooting I've ever done, srs. I don't even.
Blaming TulAmmo and Monster energy.

all this glock talk makes me wonder how hard it would be to pocket carry a G26 instead of a J-frame or shield

[ABSPR]

Also, what the hell sort of guido would wear a black chalkstripe suit with a submachine gun? Navy blue with pinstripe, you animals.

PA has a Geissele SSA in a Spikes LPK for $210. Do want.

But can't afford because:



You bought one right?






[IMG]http://i59.tinypic.com/5w9njt.jpg[IMG]

aye

[FitBeyondForty]

Holy chit.....

In on 24th...

I need to up my game.

In my defence. I'm working a ton plus redoing the interlock in my entire yard.....

[Sp3cialK]

all this glock talk makes me wonder how hard it would be to pocket carry a G26 instead of a J-frame or shield

G26 is heavy for pocket carry. I could never make it work.

[Farley1324]

G26 is heavy for pocket carry. I could never make it work.

Nor could I.

[spirit750]

G26 is heavy for pocket carry. I could never make it work.

Is that a G26 in your pocket? Or are you just happy to see me....

Championshootersupply called me today by the way. Told me that the shipping for 4 boxes of Eley was going to be $19 and asked me if I still wanted to keep the order. I respectfully declined.

[Yeti06]

G26 is heavy for pocket carry. I could never make it work.

single stack 9mm then or Jframe... decisions decisions.