The Official Craigslist Thread (Round 3)

[cwcmac]

Looking at older Body Solid Lat Pulldown/seated row machine (with about 6-7 accessories) and a body solid seated leg extension (appears to be an older version of GLCE-365) for $200.

Is that a decent deal for the two and all of the pulldown attachments?

[linuxrulesusa]

Looking at older Body Solid Lat Pulldown/seated row machine (with about 6-7 accessories) and a body solid seated leg extension (appears to be an older version of GLCE-365) for $200.

Is that a decent deal for the two and all of the pulldown attachments?

I'd probably go for it if I was looking for a lat pulldown. Attachments will run you $10-15 used individually at a Play it Again Sports type place, so I'd grab them in a package on CL like you're thinking about. Lat pulldowns (the machine itself) have been going in my area for $100+, but often closer to $200, depending on brand and features. A cheaper/space saver option to do similar exercises if you have a rack already is the Spud Inc Econo Lat Pulley. EliteFTS has it for $57 for a couple more days. I don't know about the leg extension but since the newer model is $400+, I'd say it's worth it.

[Mechanon84]

Wow.

What a deal...

http://sfbay.craigslist.org/eby/spo/5144344686.html

[Domicron]

Full dumbbell set with rack and Flex Fitness Olympic bench, this is commercial grade equipment, no cheap stuff here.

Dumbbells: 2 x 80, 2 x 70, 2 x 60, 2 x 50, 2 x 45, 2 x 40, 2 x 35, 2 x 30, 2 x 25, 2 x 20, 2 x 15 (940 lbs)

Olympic bench with Texas Power Bar and weights: 8 x 45, 2, x 35, 2 x 25, 6 x 10, 4 x 5 (560 lbs)

That 1500 lbs of weights!!! Bench has BRAND NEW pad. If you are serious about fitness, this is your package.

I'll even throw in a very nice flat bench too!

he's asking 1250. it's sad cuz i don't have much scratch lying around, but if the bar is in good shape and the plates were old yorks, what do you guys think would be a good price for the package?

[Poordad]

he's asking 1250. it's sad cuz i don't have much scratch lying around, but if the bar is in good shape and the plates were old yorks, what do you guys think would be a good price for the package?

You already have a decent rack, no need for the bench. See if he'll go for $7-800 for the weights alone, roughly $0.50/lb

[SmokinJoe87]

That's not a Capps' Texas Power Bar either.

[Domicron]

You already have a decent rack, no need for the bench. See if he'll go for $7-800 for the weights alone, roughly $0.50/lb

That's not a Capps' Texas Power Bar either.

thanks guys. it was unlikely i was going to jump on the offer, it's not much of an upgrade to what i have, if at all. the yorks would have been nice to pickup, but that's about it.

[g8rlaw]

I'd probably go for it if I was looking for a lat pulldown. Attachments will run you $10-15 used individually at a Play it Again Sports type place, so I'd grab them in a package on CL like you're thinking about. Lat pulldowns (the machine itself) have been going in my area for $100+, but often closer to $200, depending on brand and features. A cheaper/space saver option to do similar exercises if you have a rack already is the Spud Inc Econo Lat Pulley. EliteFTS has it for $57 for a couple more days. I don't know about the leg extension but since the newer model is $400+, I'd say it's worth it.

Where are you seeing the Econo Lat Pulley for $57? I'm seeing $72.68 on Elite FTS right now. Is there a coupon code or additional discount? I've been waiting for it to drop to a point where it isn't much cheaper to do a DIY version.

[Cleveland33]

thanks guys. it was unlikely i was going to jump on the offer, it's not much of an upgrade to what i have, if at all. the yorks would have been nice to pickup, but that's about it.

Did he say they were Yorks - hard to tell but they don't look like it to me - could just be the angle and lighting.

Assuming the roundheads are 15-45 - I can't see the whole deal being worth more than $100 - less since it isn't a Capps TPB, and I was being generous with $100 for the bench. And I am assuming the plates aren't vintage Yorks. Still even if they are I don't see $100 being a deal either.

Where are you seeing the Econo Lat Pulley for $57? I'm seeing $72.68 on Elite FTS right now. Is there a coupon code or additional discount? I've been waiting for it to drop to a point where it isn't much cheaper to do a DIY version.

You might want to check Spud's ebay page too, they have some different set ups for the Econo Lat Pulley that aren't readily available online.

[Domicron]

Did he say they were Yorks - hard to tell but they don't look like it to me - could just be the angle and lighting.

Assuming the roundheads are 15-45 - I can't see the whole deal being worth more than $100 - less since it isn't a Capps TPB, and I was being generous with $100 for the bench. And I am assuming the plates aren't vintage Yorks. Still even if they are I don't see $100 being a deal either.



You might want to check Spud's ebay page too, they have some different set ups for the Econo Lat Pulley that aren't readily available online.

thanks. i asked for pics of the plates head on and the barbell endcap but havne't heard back

[linuxrulesusa]

Where are you seeing the Econo Lat Pulley for $57? I'm seeing $72.68 on Elite FTS right now. Is there a coupon code or additional discount? I've been waiting for it to drop to a point where it isn't much cheaper to do a DIY version.

They had it for $57 earlier in the week (Tuesday I think is when I ordered mine). Then later on Wednesday it went back up to $72. I had been thinking about grabbing a second one to do a cable crossover type thing but decided to wait because of the price hike. I'll have to check out their eBay pages for other options too.

[Buccaneer82]

IVANKO PRO STYLE dumbells (FAIRFIELD, ME)
Ivanko pro style plate loaded weights $.65 lb.
5-75 15 pairs total in this set 5 lb pairs check web site to see what these cost new also see shiping cost all handles perfect all end caps tight 1200 lbs total
Call Monday thru Friday 5 to 10 pm
Anytime on the week-ends
Leave a message and I'll call you back

Phone calls only

[g8rlaw]

IVANKO PRO STYLE dumbells (FAIRFIELD, ME)
Ivanko pro style plate loaded weights $.65 lb.
5-75 15 pairs total in this set 5 lb pairs check web site to see what these cost new also see shiping cost all handles perfect all end caps tight 1200 lbs total
Call Monday thru Friday 5 to 10 pm
Anytime on the week-ends
Leave a message and I'll call you back

Got excited for a second because I remembered you're in FL, then I see this is in Maine.

[g8rlaw]

They had it for $57 earlier in the week (Tuesday I think is when I ordered mine). Then later on Wednesday it went back up to $72. I had been thinking about grabbing a second one to do a cable crossover type thing but decided to wait because of the price hike. I'll have to check out their eBay pages for other options too.

Damn, looks like I missed out. I guess I'll just have to hold on until the next time it drops.

[arazvi]

is this a york curl bar? Seller says it is pre-1996 so it should be USA made, is that correct? Is $50 a decent price?

[j5ive]

Keys power system machine squat/ calf raise
Worth $100 bucks? I already have a leg press, seated calf machine, smith machine and a power rack and plenty of space didn't know if this would be a good addition for me and the wife.....

[linuxrulesusa]

Damn, looks like I missed out. I guess I'll just have to hold on until the next time it drops.

By the way I got mine last night and I'd say it's definitely worth the $57, works great and well made. I'd be more hesitant at a higher price.

[AttyGuy]

is this a york curl bar? Seller says it is pre-1996 so it should be USA made, is that correct? Is $50 a decent price?

Looks like a York, but it also looks like it is chromed, which York would not do, at least in 1980's. Also, there appears to be wear on the knurling with the original metal color showing through.

[Cleveland33]

is this a york curl bar? Seller says it is pre-1996 so it should be USA made, is that correct? Is $50 a decent price?

it is a York, hard to tell the time for me. That said, it looks chromed and therefore I don't think it's much (if any) better than any other ez curl bar. You want to find an older York from the 80s or earlier that would be bare steel.

I think - might be off on my timeline

[eoakland]

Wow.

What a deal...

http://sfbay.craigslist.org/eby/spo/5144344686.html

probably not. brand new it's $1,400 with shipping. the matador attachment is also missing =)

[AttyGuy]

Looks like a York, but it also looks like it is chromed, which York would not do, at least in 1980's. Also, there appears to be wear on the knurling with the original metal color showing through.

it is a York, hard to tell the time for me. That said, it looks chromed and therefore I don't think it's much (if any) better than any other ez curl bar. You want to find an older York from the 80s or earlier that would be bare steel.

I think - might be off on my timeline

The bars were cadmium plated first, then chrome plated. The collars, sleeves, and donuts were bare metal. This one has chromed sleeves. I don't think it's York, or if it is, it's been plated after purchase.

[anon894205]

The bars were cadmium plated first, then chrome plated. The collars, sleeves, and donuts were bare metal. This one has chromed sleeves. I don't think it's York, or if it is, it's been plated after purchase.

Jan 1983 York advertized straight up chromed bars

anony.ws/i/2015/08/01/Jan1983chroming.png

[Mechanon84]

probably not. brand new it's $1,400 with shipping. the matador attachment is also missing =)

Yeah sorry, that was sarcasm. It's a **** deal.

[Domicron]

nothing to get your panties wet over, but not a terrible price for some starter gear in my area...

i think the dumbbells are the Costco-sold "ivanko" (re. Impex) dumbbells

http://kansascity.craigslist.org/hab/5151745780.html

[Conquer92]

Picked these up for free last night on craigslist. How much should I post them to eBay for?
I do not mind holding onto them for a while, so what is a reasonably-aggressive price to get for them? Seems like eBay is the best way to get the most views on them. Will post them to the CrossFit Forum Equipment section as well for sale. You know the crossfitters with money would love technique plates

Here is a link to the new ones which is $358 for a pair. But IMHO my older design looks superior to the newer design.
http://www.eleikoshop.com/collection...hnique-disc-kg

[Domicron]

congrats on the free pickup, but how much money are you expecting for beat up 5kg technique plates that are cracking around the rim?

[oldred]

Cracked but functional, and new ones you pay shipping from Sweden so I would ask at least tree-fiddy.

[Domicron]

nothing to get your panties wet over, but not a terrible price for some starter gear in my area...

i think the dumbbells are the Costco-sold "ivanko" (re. Impex) dumbbells

http://kansascity.craigslist.org/hab/5151745780.html

looks like someone jumped on the dumbbells and is trying to sell them for $500. wonder if he knows that they were costco/impex and not made by Ivanko...wonder if he'll get the money he's hoping for...

[Buccaneer82]

Atlantis Strength Reverse Hyper - $650

http://fortmyers.craigslist.org/col/spo/5155586319.html

[Mechanon84]

http://sfbay.craigslist.org/sby/spo/5155760307.html

Pretty good deal.