Do you have an aerotank mini or a regular aerotank? The heads aren't interchangeable I don't think.
You can check to see if this is the case because the heads won't screw down perfectly evenly. They'll look a tiny bit crossthreaded/crooked, at least in my experience.
|
-
07-29-2014, 07:14 PM #1141
- Join Date: Mar 2010
- Location: Statesboro, Georgia, United States
- Age: 32
- Posts: 10,305
- Rep Power: 23152
***SCC***
The gods will do nothing for us that we cannot do for ourselves.
"We are what we repeatedly do. Excellence, then, is not an act, but a habit." Aristotle
-
07-29-2014, 07:29 PM #1142
-
07-29-2014, 07:30 PM #1143
-
07-29-2014, 09:21 PM #1144
Thanks of those of you who helped out with my question.
Safe to assume it was probably bad cotton.
Went back to the shop and just got the ones I was initially introduced with (CelluCotton)
All is well now (Although I noticed that my juice doesn't taste quite as good anymore. Almost like they're not as concentrated. Do they go bad or could it be something else aka my coils?)
-
-
07-30-2014, 12:07 AM #1145
-
07-30-2014, 08:05 PM #1146
-
07-30-2014, 09:32 PM #1147
-
07-30-2014, 09:35 PM #1148
-
-
07-31-2014, 08:32 PM #1149
really been wanting a four post RDA and I think the infinite CLT fits the bill. it's like a tobh, helios, and stillaire in one
and then i found the doge RDA which is $30 shipped and i ordered one just now. has three posts but can't resist doge... i'll most likely order the CLT sometime in the near future
http://www.vapordna.com/CLT-RDA-Rebu...e-p/in0001.htm
http://congrevape.com/projects/compe...-doge-rda-rd2/
-
08-01-2014, 06:47 AM #1150
quitsmoking/startedvaping 7 months ago and never looked back.
a vision spinner and justfog maxi did the trick.
started rebuilding recently, made some terrible coils, I was about to give up then I found out the wire was crap,
tried kanthal D 0,25mm with cotton and it works very well.
now I bought a Kayfun3.1 clone from fasttech, should be here by christmasThe problem is I'm focusing on the things in life that don't really matter.
-
08-01-2014, 09:06 AM #1151
-
08-01-2014, 11:32 AM #1152
-
-
08-01-2014, 11:40 AM #1153
-
08-01-2014, 12:43 PM #1154
-
08-01-2014, 04:10 PM #1155
-
08-01-2014, 06:34 PM #1156
-
-
08-01-2014, 07:43 PM #1157
- Join Date: Oct 2013
- Location: Boynton Beach, Florida, United States
- Posts: 1,738
- Rep Power: 5315
-
08-01-2014, 08:30 PM #1158
-
08-02-2014, 04:37 PM #1159
-
08-02-2014, 10:13 PM #1160
-
-
08-02-2014, 10:35 PM #1161
-
08-03-2014, 01:11 AM #1162
-
08-03-2014, 11:26 AM #1163
- Join Date: Oct 2013
- Location: Boynton Beach, Florida, United States
- Posts: 1,738
- Rep Power: 5315
IPV2 is pretty sick for the money
variable wattage works perfectly and up to 50 watts is perfect. the build quality is decent enough... it's compact, would be nice if it could hold two 18650s for longer battery life but it's still not bad. the little screws are annoying, wish it had magnets since it is a pain to unscrew them so no quick swaps but you can just charge via usb if you don't mind waiting.
-
08-03-2014, 12:45 PM #1164
-
-
08-03-2014, 01:26 PM #1165
-
08-03-2014, 02:52 PM #1166
-
08-03-2014, 02:58 PM #1167
-
08-03-2014, 05:19 PM #1168
-
-
08-03-2014, 06:25 PM #1169
-
08-03-2014, 07:47 PM #1170
Bookmarks