**Official Electronic Cigarette (E-Cig)/Vapers Crew - Part II**

[Robb817]

There are guides on youtube. most people use 30 gauge- really though it is more of a pain to rebuild heads than use an RBA meant for rebuilding with post screws. you also can't dry burn rebuilt protank heads since you will burn the insulator so you will be building a lot of coils and they are a pain to work with. I tried it at first then said screw it.

just get a kayfun. ehpro kayfun lite+ v2 off ebay for ~$30, they work well on lower wattage devices too like MVPs if you build around 1.8 and are perfect if your device goes up to even to 15 watts.

Thanks for the advice! I screwed my friends kayfun on my MVP and it's ridiculously top-heavy. Are there any good RBAs that are lighter?

Anyone seen Innokin's new "Zodiak" mechanical mod. Looks interesting. Supposed to cost $90.

[Xone]

Was it a kayfun 3.1? they are long...

a kayfun lite isn't too bad on an mvp. but you are going to want to upgrade that mvp eventually anyway.

[Krunk Fu]

the vaporshark came in today, a day early. I love it, it kinda sucks that it won't be mine lol. The thing fits in the palm of your hand, it's crazy considering the size of most box mods these days.

Haha nice! What are you using with it? Would the ehpro kayfun lite be too big?

[F2.]

Do any of you guys rebuild protank style coils? I like to change my atomizer heads every few days and I'm sick of spending $8 on a 5 pack. Was wondering what gauge wire I need, can I use cotton, how many wraps, etc?

Why? If you are going to take the time to rebuild buy something meant to be rebuilt. Pick up a kayfun

Aight here is my list:

http://www.vaperoyalty.com/hcigar-nemesis-mod/

http://www.vaperoyalty.com/hcigar-to...rda-stainless/

http://www.vaperoyalty.com/atomizer-ohm-reader/

http://www.amazon.com/NiteCore-Intel...ds=nitecore+i2

http://www.amazon.com/TEMCo-Kanthal-...mco+kanthal+26

http://www.ebay.com/itm/2x-SONY-US18...item19edb0cb40

http://www.amazon.com/Swisspers-Cott...organic+cotton

DOES THAT COVER EVERYTHING... LOOK GOOD? LINK FOR TWEEZERS NEEDED..

You don't need fancy tweezers brah. A pair from wally world work just fine.

I'd personally recommend a kayfun before getting an atty. My atty is nice, but it's annoying to have to make sure not to tip it over, and it have to refill it so often.

[Father of Cajun]

Haha nice! What are you using with it? Would the ehpro kayfun lite be too big?

using a zenith v2 on it. It would look a bit wonky. Here's a vaporshark with a russian 91 on it:







I got this in a trade and it came in today. Anatolian mod with versa switches. I think they only made like 366 of these. Could have just been the first run though, not sure. Anyway, gonna try to sell it to recoup some cash.

[anderlin83]

Why? If you are going to take the time to rebuild buy something meant to be rebuilt. Pick up a kayfun


You don't need fancy tweezers brah. A pair from wally world work just fine.

I'd personally recommend a kayfun before getting an atty. My atty is nice, but it's annoying to have to make sure not to tip it over, and it have to refill it so often.

Aight.. link for kayfun.. at work thx man

[zak2210]

just got my kayfun in brahs

taste is amazing but i'm finding the vapour a bit too hot compared to the fogger, great tank otherwise

[F2.]

just got my kayfun in brahs

taste is amazing but i'm finding the vapour a bit too hot compared to the fogger, great tank otherwise

Running it on a mech? If so just build a higher ohm coil

[BrahJamie]

this is my esmoke brahs. Is it poverty ? and if it is whats literally the best reasonable priced ecig

[John$Galt]

this is my esmoke brahs. Is it poverty ? and if it is whats literally the best reasonable priced ecig

Looks like a CE4 clearomizer on an eGo style battery. Decent, not poverty, but definitely not the best starter kit. You'll get the best vape and performance from bottom feeders that don't have to wick the juice up to an atomizer at the top.

This is the one I always recommend for beginners:

http://www.easycig.net/e-cig-starter-kit/

[BrahJamie]

Looks like a CE4 clearomizer on an eGo style battery. Decent, not poverty, but definitely not the best starter kit. You'll get the best vape and performance from bottom feeders that don't have to wick the juice up to an atomizer at the top.

This is the one I always recommend for beginners:

http://www.easycig.net/e-cig-starter-kit/

Thanks brah. Il look into them when i get paid tomorrow. I just use the ecigs as an alternative to cigerrettes

edit: Does that website ship to Ireland/europe?

[Krunk Fu]

using a zenith v2 on it. It would look a bit wonky. Here's a vaporshark with a russian 91 on it:

Is that a legit or clone russian 91? Looks great on the vapor shark

[John$Galt]

Thanks brah. Il look into them when i get paid tomorrow. I just use the ecigs as an alternative to cigerrettes

edit: Does that website ship to Ireland/europe?

Looks like they do. From their site:

International orders:
We have now re-implemented International Shipping. We will ship to any country that you request, but please read the paragraphs below before placing your order.
International Shipment Liabilities. Freedom Smokes Inc. assumes no liability for international shipments once the package has left our facility. Purchaser is responsible for knowing and understanding the laws regarding the importation of any products ordered into their country. All International Shipments including products that contain nicotine will be shipped with the products clearly labeled as such. Purchaser assumes total liability for shipments confiscated or delayed by customs and is responsible for any duties imposed on shipments or orders.
We are unable to control what carrier handles the package once it leaves the US and are not responsible for packages that are undeliverable, mis-delivered, lost, or stolen.
International shipments that are returned to us for any reason will be held for 10 days and then discarded. Returned packages will not be refunded and no credits will be given. The package may be re-shipped upon request, but will require payment of a second shipping charge to cover the cost of re-shipment.

[BrahJamie]

Looks like they do. From their site:

International orders:
We have now re-implemented International Shipping. We will ship to any country that you request, but please read the paragraphs below before placing your order.
International Shipment Liabilities. Freedom Smokes Inc. assumes no liability for international shipments once the package has left our facility. Purchaser is responsible for knowing and understanding the laws regarding the importation of any products ordered into their country. All International Shipments including products that contain nicotine will be shipped with the products clearly labeled as such. Purchaser assumes total liability for shipments confiscated or delayed by customs and is responsible for any duties imposed on shipments or orders.
We are unable to control what carrier handles the package once it leaves the US and are not responsible for packages that are undeliverable, mis-delivered, lost, or stolen.
International shipments that are returned to us for any reason will be held for 10 days and then discarded. Returned packages will not be refunded and no credits will be given. The package may be re-shipped upon request, but will require payment of a second shipping charge to cover the cost of re-shipment.

nice brah thanks

[Father of Cajun]

Is that a legit or clone russian 91? Looks great on the vapor shark

no idea, that isn't my picture.



I ordered a goddamn zenith clone that was supposed to be here yesterday and it still isn't here, tracking doesn't show it was ever shipped, but the ebay seller says it was. I've been with out a ****ing atty for like 5 days now and it's hard.

[zak2210]

How is this for starters?

E VOD Vaporizer E Pen,BCC Clearomizer (Stainless Steel) Electronic 1100mAh, Kit

pretty poverty but it will do the job

i started on that same e cig myself, i recommend trying out different flavours to find something you like and get to grips with the whole aspect of vaping then upgrade when you're ready

[Mastermuffin]

So I have a Aspire Nautilus and it really seems to love to burn coils.... Ive had it for 2 weeks and went through 5 coils. Im running it at 8-10 watts max, why the fuk does it keep burning them?


Also what is the best rebuildable tank clone out there? Tired of buying new coils for $3 only to have them fry in 1-3 days.

[kyleTX]

no idea, that isn't my picture.



I ordered a goddamn zenith clone that was supposed to be here yesterday and it still isn't here, tracking doesn't show it was ever shipped, but the ebay seller says it was. I've been with out a ****ing atty for like 5 days now and it's hard.

i'm getting the zenith's tmrw, along with copper mephisto (, dem 3mm post holes), brass mephisto, gold and black stillares, infinite copper Cartel mod (best and hardest hitting clone ever), copper Pegasus, brushed SS new king v2, copper 4nine, black heimdall, illuminatus, and more hana clones (w/ logo). Clone customers are going to bust nuts when they come in tomorrow

[zak2210]

So I have a Aspire Nautilus and it really seems to love to burn coils.... Ive had it for 2 weeks and went through 5 coils. Im running it at 8-10 watts max, why the fuk does it keep burning them?


Also what is the best rebuildable tank clone out there? Tired of buying new coils for $3 only to have them fry in 1-3 days.

had the same problem with the nautilus brah, same reason i got into rebuildables

would defo recommend a kayfun lite+ clone - cheap and flavour is awesome, also pretty easy to rebuild

get yourself some 28g kanthal and some cellucotton

[Awfulwafflebrah]

had the same problem with the nautilus brah, same reason i got into rebuildables

would defo recommend a kayfun lite+ clone - cheap and flavour is awesome, also pretty easy to rebuild

get yourself some 28g kanthal and some cellucotton

Thats whats preventing me from getting a nautilus too. I really want to try it out cause the reviews are great on it, but if it goes through coils like my pro tank(POS) did I can't be bothered. IMO rebuildables are GOAT, I'm in it to save money on top of the health factor.

[kyleTX]

Thats whats preventing me from getting a nautilus too. I really want to try it out cause the reviews are great on it, but if it goes through coils like my pro tank(POS) did I can't be bothered. IMO rebuildables are GOAT, I'm in it to save money on top of the health factor.

giant/mega/mini aerotank > nautilus

[Awfulwafflebrah]

still uses coils though and I know I'll be pissed off after a month of use. I should look into a kayfun at some point.

[Father of Cajun]

go straight to a dripper


Polished the Anatolian and it looks tons nicer. not sure if i should keep or sell.

[be4st]

New vape user checking in!

Got a vape (mechanical mod) last week. Things were going great, love my piece, juices are good, everything good.

Today I noticed I needed to change my cotton as it looked like it was turning quite dark and losing smooth pull.

I went to the local walgreens, got myself "studio beauty organic cotton balls".

Heard it's good to boil it to get rid of any additives so I got a big pot and boiled the little chits for a good 10-15 minutes.

I take it out, squeeze em dry, and proceed to set em into the coils like I saw the store guy do.

Applied my juice and took a hit....tastes like chit. There's this weird/burnt taste.

Where did I go wrong?

Pretty sure I put it into the coil correctly (not rocket science).

Couple things that come to mind as possibilities:
1. bought the wrong cotton
2. boiling it was a bad idea
3. maybe the pot wasn't completely clean and some sort of residue got mixed into the cotton
4. I didn't dry out the cotton enough

Help this noob out brahs.

[Father of Cajun]

New vape user checking in!

Got a vape (mechanical mod) last week. Things were going great, love my piece, juices are good, everything good.

Today I noticed I needed to change my cotton as it looked like it was turning quite dark and losing smooth pull.

I went to the local walgreens, got myself "studio beauty organic cotton balls".

Heard it's good to boil it to get rid of any additives so I got a big pot and boiled the little chits for a good 10-15 minutes.

I take it out, squeeze em dry, and proceed to set em into the coils like I saw the store guy do.

Applied my juice and took a hit....tastes like chit. There's this weird/burnt taste.

Where did I go wrong?

Pretty sure I put it into the coil correctly (not rocket science).

Couple things that come to mind as possibilities:
1. bought the wrong cotton
2. boiling it was a bad idea
3. maybe the pot wasn't completely clean and some sort of residue got mixed into the cotton
4. I didn't dry out the cotton enough

Help this noob out brahs.

take a few more hits and see if it goes away. cotton balls don't need to be boiled really, especially not organic ones. shouldnt hurt anything though. If you'd like, I can set up a tinychat (online video chat thing) room and walk you through some troubleshooting, how to wick your coils, etc.





also, quoting my pic from last page, Xone do you know anything about anatolians?

Polished the Anatolian and it looks tons nicer. not sure if i should keep or sell.

[Mastermuffin]

had the same problem with the nautilus brah, same reason i got into rebuildables

would defo recommend a kayfun lite+ clone - cheap and flavour is awesome, also pretty easy to rebuild

get yourself some 28g kanthal and some cellucotton

Already have 28g kanthal and organic cotton for my dripper so I guess im set, need to pawn off this damn natailus now... all aspire heads seem to suck

[SICKK]

New vape user checking in!

Got a vape (mechanical mod) last week. Things were going great, love my piece, juices are good, everything good.

Today I noticed I needed to change my cotton as it looked like it was turning quite dark and losing smooth pull.

I went to the local walgreens, got myself "studio beauty organic cotton balls".

Heard it's good to boil it to get rid of any additives so I got a big pot and boiled the little chits for a good 10-15 minutes.

I take it out, squeeze em dry, and proceed to set em into the coils like I saw the store guy do.

Applied my juice and took a hit....tastes like chit. There's this weird/burnt taste.

Where did I go wrong?

Pretty sure I put it into the coil correctly (not rocket science).

Couple things that come to mind as possibilities:
1. bought the wrong cotton
2. boiling it was a bad idea
3. maybe the pot wasn't completely clean and some sort of residue got mixed into the cotton
4. I didn't dry out the cotton enough

Help this noob out brahs.

I'm willing to bet it was #4. When I boil my cotton, I set it to dry overnight after I've expunged whatever water I could by hand.

[kevinxd]

Any blueberry cream recommendations?

[Xone]

Couple things that come to mind as possibilities:
1. bought the wrong cotton
2. boiling it was a bad idea
3. maybe the pot wasn't completely clean and some sort of residue got mixed into the cotton
4. I didn't dry out the cotton enough

Help this noob out brahs.

couple things regarding cotton

1, 3, and 4 are all a possibility

On boiling- a lot of cotton including organic can benefit from boiling. just have to make sure the pot is clean and your water isn't nasty. it definitely needs to be totally dry overnight sitting on towels or something.

there's really nothing special about organic cotton flavor wise and it can still taste like utter chit out of the bag depending on the brand (I have and use walgreens brand organic sometimes, it definitely needs to be boiled). organic gets hyped up a lot but just because it's organic doesn't mean it is cleaned, it just means it wasn't grown with pesticides or whatever...

the only standard cotton that is guaranteed to taste clean from the start is sterile cotton (CVS sells it). sterile cotton is sterilized/cleaned in an autoclave so it tastes best from the start. boiling cotton attempts to do the same thing but depending on various factors may not work as well.

[slapaho]

coval vapes has amazing customer service. ordered some crunchberry and they threw in another bottle of churro for free