Official Misc Wristwatch Crew Part IIII: Read the OP

[MetroBrah]

Nice try brah but no...

Just remembered it was a round case.

Similar to this Halda

case wise but it was black, the numbers were more dark like the ones on the polar watch you mentioned.

I am determined to figure this out lol. Maybe it was *****? goooochy

g shock to the gym crew...


anyways, the more I wear this sub, the more I like it...

same here G shock to the gym for life. If I can't smash it against weights without worrying about it I aint wearin it to the gym.

[datniche]

Man I'm still so confused over this Speedmaster diameter issue. It's making me feel a little concerned.

Info:
-Omega's site says the 3551.20 is 42mm
-Took the watch to Omega Beverly Hills. They even opened it, confirmed authentic. Measured 42mm, with crown, and was told that is how they measure for Omega.
-Some for sale say 42mm without crown
-My seller said 40mm in the listing. That is true without crown

I messaged some eBay sellers selling the same watch asking the true measurements. So far it's varying.

One said 42mm without crown, 46mm with (???)
Another said 41.47mm without crown, 42.57mm with crown.

Mine is 42mm with crown, 40mm without. Not measuring with calipers, but the point is it's definitely not 42mm without crown.



What's everyone think about this? Should I be concerned? Again, the watchmaker at Omega did say it was authentic... But I don't understand this difference in sizing.


Pls respond..

[silkysmoothe]

brah relax. Most people don't measure them right anyways. The lug length seems to be 40mm or so because the Rolex Sub looks the same to me. But anyways check this out.

[datniche]

Yeah I saw that image. Definitely not the measurements of my Broad Arrow. The 44 is 42, and the 42 is 40. Yet the Pro is advertised as 42..and so is my Broad Arrow. How could one be with crown and one without? I'm not super concerned it's just a little iffy, I dunno. It seems like some people are getting the same measurements as your pic.

[silkysmoothe]

Yeah I saw that image. Definitely not the measurements of my Broad Arrow. The 44 is 42, and the 42 is 40. Yet the Pro is advertised as 42..and so is my Broad Arrow. How could one be with crown and one without? I'm not super concerned it's just a little iffy, I dunno. It seems like some people are getting the same measurements as your pic.

its time for you to buy a ruler. lol stop worrying brah. Its a beautiful watch and you already know its authentic.



Need more pics ITT

[Geoloop]

I am determined to figure this out lol. Maybe it was *****? goooochy

could be brah, it had more presence than that watch for sure.

[datniche]

its time for you to buy a ruler. lol stop worrying brah. Its a beautiful watch and you already know its authentic.

Lol I own one. I don't really think there's a problem, but I don't get how people are saying 42mm without crown. Maybe there's 2 sizes, no idea... But it's gorgeous.

[yushhh]

Dont care about official size because watch is Fuarking sexy/10

[datniche]

My friend is really into China fakes. He has a few already, not the complete bogus fakes but the few hundred dollar "higher quality" ones. His girlfriend is from China and she's about to go visit, and he wants her to pick up a tour billon. I know even the fakes are a good $1000. Probably looking at a lange, iwc, or jlc.

What do you say to someone like this? Don't want him to drop $1000 on junk but he's pretty set. Wants the "technology" of a tourby, not concerned with the case..

He's also saying anything real for $1000 is lame and generic...

[byukid]

My friend is really into China fakes. He has a few already, not the complete bogus fakes but the few hundred dollar "higher quality" ones. His girlfriend is from China and she's about to go visit, and he wants her to pick up a tour billon. I know even the fakes are a good $1000. Probably looking at a lange, iwc, or jlc.

What do you say to someone like this? Don't want him to drop $1000 on junk but he's pretty set. Wants the "technology" of a tourby, not concerned with the case..

He's also saying anything real for $1000 is lame and generic...

[RyouBakua]

wearing my 807 now




best place for watch straps?

want to get a leather and most likely a nato

i assume everyone will say to stay away from ebay straps

[silkysmoothe]

I'm srs in love with my speedmaster.

[ScudBro]

I'm srs in love with my speedmaster.

It'll fade eventually

@Ryou: for leather, I'd recommend a Hadley Roma MS881 in oil tan. Cheapestnatostraps is a good place for NATO's.

[datniche]

It'll fade eventually

say it to my face and not on the internet





Scud, can you drop some knowledge on Rolex servicing? My parents both have Rolexes that stopped running years ago and they haven't wanted to pay to get them serviced, lol. I'd really like to get it done. May or may not be so I can try to hijack the Submariner.

[ScudBro]

Depends bro. If they're vintage pieces, I'd never ever send them to an RSC, bc they'll swap out the hands & dials for new versions. And honestly, even with newer models I'd just look for a good local watchmaker. Rolex charges ridiculous amounts for servicing a basic caliber.

[silkysmoothe]

This makes me hnnng




All those scratches. So many memories.

[datniche]

Depends bro. If they're vintage pieces, I'd never ever send them to an RSC, bc they'll swap out the hands & dials for new versions. And honestly, even with newer models I'd just look for a good local watchmaker. Rolex charges ridiculous amounts for servicing a basic caliber.

They're from the 90s I believe. That's good advice, as my dad seems convinced the only way is through Rolex directly. Definitely gonna try to get them up and running again, would feelgoodman as that got me into watches in the first place.

This makes me hnnng

[img]http://forum.bodybuilding.com/attachment.php?attachmentid=6986841&stc=1&d=140186 5990[img]


All those scratches. So many memories.

hnnng dat before/after

http://forums.watchuseek.com/f20/my-...ml#post4089537

Not quite mirin it all scratched up

[silkysmoothe]

Does anyone have insurance on their watches? Thinking about doing it for my speedy.

[poison]

Been ages since I came in here, trying to avoid seeing pretty things I can't afford. So much for that, right?

My collection, for some time, has been an ST Dupont RAID, a gift from my employer:



A Momentum beater:



And my Olivier:



Lately, I've been wearing the Dupont for work, and the beater on my time off, and the Olivier just sitting on the shelf. Not because I don't like it, I LOVE it, but it's not a beater. I guess I'm no collector, because I don't really need a third watch laying around, just the Dupont, and one for everything else, so I sold the Momentum, and bought this:



I was thinking if I like it, I'd sell the Olivier. But the lume sucks, and I need good lume, and I like a bolder face. So now I'm considering selling both the Olivier and Orient, and buying a Bangla:



Lol, wtf? If I didn't need extra cash, I'd just keep the Olivier.

[datniche]

I love that Olivier the most. Dat blue seconds hand...




how much

[poison]

I love that Olivier the most. Dat blue seconds hand...




how much

IF I sell, around $600, with additional leather strap. GAH!

[Kabananga]

They're from the 90s I believe. That's good advice, as my dad seems convinced the only way is through Rolex directly. Definitely gonna try to get them up and running again, would feelgoodman as that got me into watches in the first place.

Only go to a guy of whom you know he'll do a good job. Rolex parts are expensive enough, so you don't need some incompetent prick fukcing up the watch/scratching everything inside.

Pics of the watches?

[Brahlicious]

All this Speedie pron makes me want one hnnnnnnnnng

This is going for a reasonable price in my area, what you brahs think?

I quite like the gold accents.

[Brahlicious]

Speaking of Speedmaster pron, this just sold at my local dealer.

25th Anniversary White Gold Moon Watch on WG bracelet, $22,000

[Jecoma]

They're from the 90s I believe. That's good advice, as my dad seems convinced the only way is through Rolex directly. Definitely gonna try to get them up and running again, would feelgoodman as that got me into watches in the first place.

Other stores do not have a Rolex parts accounts so be wary of that.

[LazyStarfish]

New to this thread. I don't know chit about watches. But i always mire from a far. Is this a good beater watch?

http://www.amazon.com/gp/product/B00...A1S94JIW1HOSGL

sorry for noob questions and what not. Reps for something similar/opinions/helpful advice. Looking for a chronograph with a metal band.

[poison]

Yes, Citizen is good. If you like it, go for it.

[Jecoma]

Looking for a chronograph with a metal band.

Omega Speedmaster or Seamaster chrono or GTFO!!!

SRS







not-srs














Semi-srs

[Foreverbulker]

anyone have any recommendations for watch tool kits?

can't seem to find a shop that sells them, been wanting to change out my watch straps

[Jecoma]

anyone have any recommendations for watch tool kits?

can't seem to find a shop that sells them, been wanting to change out my watch straps

If it´s only for straps just check amazon.
If you want caseopeners and stuff, good luck finding one that ships to NZ.