'Look what I bought today!'.

[rthawker]

you ever get chain? Curious how it worked out for you

He did. He talked about it in his gym thread.

[Cleveland33]

He did. He talked about it in his gym thread.

what no link? You lazy....

[rthawker]

what no link? You lazy....

Starts here. http://forum.bodybuilding.com/showth...post1283866691

I was going to link it but you're right I'm lazy.

[Cleveland33]

Starts here. http://forum.bodybuilding.com/showth...post1283866691

I was going to link it but you're right I'm lazy.

that's why you and I get along so well

[darren.dugan]

^ damn dude. Awesome score. Did you pick that up in the springs or pueblo? Hopefully you weren't poaching in the Denver (ALL MINE!!) area!

I got it all the way down in Cortez, CO, about 30 minutes away from four corners. I traveled through yesterday driving back home from Phoenix. I was lucky that a member here pm'ed me the link last week.

Even if you bought a brand new stand from ironmaster that would still be an awesome deal.

I'll probably make my own stand and use the money I make from selling the bench for the 120 add on.

[aclockworkoi]

I got it all the way down in Cortez, CO, about 30 minutes away from four corners. I traveled through yesterday driving back home from Phoenix. I was lucky that a member here pm'ed me the link last week.



I'll probably make my own stand and use the money I make from selling the bench for the 120 add on.

Keep us updated on what you do for the stand. I'm confident there is a better way to set up a stand for the 120s, I just don't know what it is .

[darren.dugan]

Keep us updated on what you do for the stand. I'm confident there is a better way to set up a stand for the 120s, I just don't know what it is .

I was probably just going to duplicate the iron master stand with wood. Was thinking about welding one up but, I think I may need to buy more steel and that's not something I feel like doing when I could just use the spare particle board I have and spend less than $10 at Lowe's for the other required stuff.

We will see.

[ImStylinOnYaBro]

FI bench courtesy of Dynamic Fitness & Strength.

[OSUDimond]

FI bench courtesy of Dynamic Fitness & Strength.

Solid looking bench.

I got the high school delivered today and although it isn't as prime time as it originally would have been it is still going to be a good one. It was originally supposed to have 4 quality racks and HS iso row and HS jammer. I have to do some research to find out the value of those jigsaw flooring tiles. I have a bunch and they are huge. I also don't have a clue about those big bubba blocking leverage machines. I got to sell some of this to make room for 6 Startrack treads and 4 bikes. I have been in a drought most of the year and now everything is coming together.

Before/After


Cybex functional trainer and actually pretty cool slanted plate tree


Db's 5-100 with a bunch of extra lighter weight ones.


I need to dig up info on these things. It is heavy as all hell and well made


This thing feels great for shrugs but man is it gigantic. First time coming across one of these or ever seeing one.


Haven't got an accurate count yet but I got a bunch of these suckers
[IMG]http://i1070.photobucket.com/albums/u483/osudimond/C30A7BEB-CB93-4DCA-9F1C-748A55F09FA4_zps7kuj****.jpg[/IMG]

I thought this was a hammer peice but after trying it and looking at it I realize it is not. Really well made machine with no branding.




Got a bunch of other stuff too but these were the odd or interesting ones.

[JayDigital]

Awesome stuff man!

I thought this was a hammer peice but after trying it and looking at it I realize it is not. Really well made machine with no branding.

Would be very surprised if that wasn't a Hammer piece.

[ndmike99]

Awesome stuff man!



Would be very surprised if that wasn't a Hammer piece.

Might be promaxima.

[deadwoodgregg]

Might be promaxima.

Looks like Promaxima pads.


http://www.promaxima.com/fitness-equ...pull-down.html

[OSUDimond]

Might be promaxima.

Looks like Promaxima pads.


http://www.promaxima.com/fitness-equ...pull-down.html

Great detective work. Thanks guys

[JayDigital]

Might be promaxima.

I stand corrected, good eye.

[OSUDimond]

I stand corrected, good eye.

The give a way for me was the handles. They are more of a rubber or plastic. And then where the seat attaches it uses metal instead of the standard hard rubber material hammer uses. I like the machine though.

[rpark]

Picked up this Bear squat machine from Pitt Panthers yesterday. I'm sure tons of people have seen it as it's been listed several times. Total cost $150. The guy at Pitt seemed to think it was a UCS unit, but I'm not sure UCS ever made one of these. Maybe UCS, maybe Powernetics, maybe Legend, I dunno, but no apparent badging. This unit is immaculate, if it had been used it was either repainted recently or something as there is hardly even any paint worn on the foot plates. Chain is perfect, no rust. Movements are very smooth. I haven't used any weights yet, but I'll further test it out this weekend. Conveniently, I had to be in far east Ohio yesterday, so the trip just added an hour each way once I added my equipment haul.

They had two other units at the facility (one complete, one was missing a pad). Guy was nice enough to offer me a lower price on one or both the other units, but I didn't bring a trailer so they remained.


Pics from govdeals








Hauling pics

[OSUDimond]

Picked up this Bear squat machine from Pitt Panthers yesterday. I'm sure tons of people have seen it as it's been listed several times. Total cost $150. The guy at Pitt seemed to think it was a UCS unit, but I'm not sure UCS ever made one of these. Maybe UCS, maybe Powernetics, maybe Legend, I dunno, but no apparent badging. This unit is immaculate, if it had been used it was either repainted recently or something as there is hardly even any paint worn on the foot plates. Chain is perfect, no rust. Movements are very smooth. I haven't used any weights yet, but I'll further test it out this weekend. Conveniently, I had to be in far east Ohio yesterday, so the trip just added an hour each way once I added my equipment haul.

They had two other units at the facility (one complete, one was missing a pad). Guy was nice enough to offer me a lower price on one or both the other units, but I didn't bring a trailer so they remained.


Pics from govdeals








Hauling pics

If this was closer I woulda been bidding on this. Nice find for a great price

[rpark]

If this was closer I woulda been bidding on this. Nice find for a great price

I go to Pittsburgh a few times a year, if I get back over there soon I'll let you know. It wouldn't be out of my way if I'm there for a Steelers game, so if they are available later this year I'll let check to see if you still want one. This is about the time of year that I start craving Primanti Bros anyway.

[irongrandpa]

Rpark, IMO, those are great squat machines, the newer models have horizontal weight horns making it easier to load plates. If I didn't already have a Magnum PL 400 , I would have bid on it ,even though it's a four hr. drive each way. congrats on the buy, glad someone hear got it.

[rpark]

Rpark, IMO, those are great squat machines, the newer models have horizontal weight horns making it easier to load plates. If I didn't already have a Magnum PL 400 , I would have bid on it ,even though it's a four hr. drive each way. congrats on the buy, glad someone hear got it.

That's my big problem..... even if I wanted to buy and flip equipment.... I usually only buy stuff I think I'll like.... so I basically HAVE TO KEEP IT.

[dumb.bell]

The bear squat is one of my favorite leg machines. Unfortunately, I don't own one yet, but it is on the list of things I'd like to get.

[darren.dugan]

Time to sell off some more capps and standards

[OSUDimond]

Time to sell off some more capps and standards

I absolutely love those plates. Nice score.

[matrix563]

had a busy last few days.

picked up 635 pounds of weights, 1 bar, bench, plate tree, 2 Olympic dumbbell handles, 2 30, 2 15, 1 25 pound hex dumbbells, all for $220 .


also got a colorful gymnastic mat for $65, and picked up this for myself for $50, 2 15 pound vtx bumpers. just need some 5 pounders and I'm set for bumpers

[jdforsy]

Picked up 400lbs of weights plus this powertec leverage squat. Already flipped the weights to cover the cost for the whole deal. The leverage squat is pretty nice but I'm really holding out for a leg press so I'm selling it as well.

[ExJbeck]

This is what I picked up yesterday. Certainly nothing to brag about, but it helps fill out my gym and I should be able to at least get my money back. Paid $100 (I think I overpaid slightly) for the parabody lat machine. It will be a great piece until I can afford to upgrade to a promaxima or powertec. If anyone around St. louis is selling theirs, get at me.

flickr.com/photos/126328075@N02/15090450471/in/photostream/

Also Got my brother to pick up the 80's for $45 for me. Now I just need 15's,35's,55's and 75's to finish my set from 15-80lbs.

flickr.com/photos/126328075@N02/14906731919/in/photostream/

flickr.com/photos/126328075@N02/15070403456/in/photostream/

[swimmer32]

A couple new purchases for me:

A Hoist CF-2160 Super Bench:



And a Legend Fitness multi-press (I may do a review on this, as I couldn't find any reviews online when I was trying to decide whether or not to purchase). Sells new for $2200, and I bought a used one in great shape for $275

[ImStylinOnYaBro]

damn, what a steal on that legend multi-press!!!! looks like a top notch piece of equipment.

[aclockworkoi]

Nice multi-press. I think I have used a Precor that was very much like that and thought it was a good machine.

[obey46]

Hadn't had a CL pick up in over a month. Got this lead from a buddy and the seller turned out to be cool. Got these for about .83/lb

edit: .62/lb from some recent profit.

Now how do I crossfit?