First there was the 'Equipment Crew'...
...then there was the 'York Crew'...
...followed by the Ivanko..
...now we have the 'No Excuses Homemade Equipment Crew'.
This thread is for people that have decided to step away from the pre made and ordinary. Anyone that has decided that not having the money for a home gym, does not give the excuse to sit on the couch. The people that want to build something equal or greater then the norm. The people that train in basements, bedrooms, and gardens ...with there homemade contraptions built for pain and growth. Iron, steel, wood, sand, rubber, bolts, screws and any other raw material is welcome within this thread. It doesnt have to be painted- rust is a valid coating for your bars and plates, as are chalk, sweat, and blood. Dungeons, tombs and sweat boxes of the world unite. This is your thread to show your designs/what you have built/how you have built it.
Only qualifications needed are the will to train, the ability to build your own gear, and a photo to show your homemade implements. If you want in, say 'IN'. If I miss your post, PM me for your crew number.
Don't know where to start? ...Stick around for some ideas. Here are some links to kick things off.
http://www.rosstraining.com/forum/vi....php?f=9&t=157
No money? ...NO EXCUSES!!! SHUT UP and BUILD.
|
-
04-07-2012, 03:16 AM #1
- Join Date: Feb 2012
- Location: United Kingdom (Great Britain)
- Posts: 4,646
- Rep Power: 65157
The 'No Excuses Homemade Equipment Crew'
Last edited by ProtienandIron; 04-07-2012 at 09:21 AM.
My training log:
---------------
http://forum.bodybuilding.com/showthread.php?t=153596291&p=1062453741#post1062453741
[]---[] Equipment Crew #43 []---[]
-!!!---!!!- No Excuses Homemade Equipment Crew #1 -!!!---!!!-
()---() York Barbell Club #4 ()---()
-
04-07-2012, 03:17 AM #2
- Join Date: Feb 2012
- Location: United Kingdom (Great Britain)
- Posts: 4,646
- Rep Power: 65157
Slots 1,2 and 3 are already taken, subject to acceptance.
My training log:
---------------
http://forum.bodybuilding.com/showthread.php?t=153596291&p=1062453741#post1062453741
[]---[] Equipment Crew #43 []---[]
-!!!---!!!- No Excuses Homemade Equipment Crew #1 -!!!---!!!-
()---() York Barbell Club #4 ()---()
-
04-07-2012, 03:34 AM #3
- Join Date: Feb 2012
- Location: United Kingdom (Great Britain)
- Posts: 4,646
- Rep Power: 65157
My homemade (with help) freestanding pullup bar. Homemade 2" fat bar, hammer, and keg in background.
Homemade pinch grip blocks.
Homemade gripper rack.
Homemade sandbag, medicine ball, and calf block
Designed by myself, made by fabricator;
My training log:
---------------
http://forum.bodybuilding.com/showthread.php?t=153596291&p=1062453741#post1062453741
[]---[] Equipment Crew #43 []---[]
-!!!---!!!- No Excuses Homemade Equipment Crew #1 -!!!---!!!-
()---() York Barbell Club #4 ()---()
-
04-07-2012, 03:43 AM #4
- Join Date: Sep 2010
- Location: Birmingham, Westmidlands, United Kingdom (Great Britain)
- Age: 31
- Posts: 904
- Rep Power: 2278
Thick Pull up bar -
http://forum.bodybuilding.com/attach...3&d=1331573765
Med ball, dip belt , thick bars ... (dont have pic)
how did you get a keg?
-
-
04-07-2012, 03:52 AM #5
- Join Date: Feb 2012
- Location: United Kingdom (Great Britain)
- Posts: 4,646
- Rep Power: 65157
OwasM
We used to hold functions at a place I once worked. They had a few old kegs from years ago and didnt mind me taking one.Last edited by ProtienandIron; 04-07-2012 at 04:01 AM.
My training log:
---------------
http://forum.bodybuilding.com/showthread.php?t=153596291&p=1062453741#post1062453741
[]---[] Equipment Crew #43 []---[]
-!!!---!!!- No Excuses Homemade Equipment Crew #1 -!!!---!!!-
()---() York Barbell Club #4 ()---()
-
04-07-2012, 04:02 AM #6
- Join Date: Feb 2012
- Location: United Kingdom (Great Britain)
- Posts: 4,646
- Rep Power: 65157
Excellent pull up bar. So much you can do with it especially if you use rings.
My training log:
---------------
http://forum.bodybuilding.com/showthread.php?t=153596291&p=1062453741#post1062453741
[]---[] Equipment Crew #43 []---[]
-!!!---!!!- No Excuses Homemade Equipment Crew #1 -!!!---!!!-
()---() York Barbell Club #4 ()---()
-
04-07-2012, 07:40 AM #7
Here is the solid axle I made. It is 6 feet long and made from 1-15/16 inch cold rolled 1018 steel. It weighs 62 pounds with the inside collars in place. The diameter is 1.938" compared to my Troy power bars which have sleeves of 1.960.
The inside collars are the Climax Metal H1C-193. I applied Oxpho Blue to blacken the steel. Total cost was about $130.
http://www.amazon.com/Climax-Metal-H...3809830&sr=8-1
http://www.brownells.com/.aspx/pid=1...XPHO-BLUE-reg-
▪█─────█▪ Equipment Crew #53 ▪█─────█▪
^^^^^^^ 6' 6" and Over Crew ^^^^^^^
------------- No Vax Crew ----------------
-
04-07-2012, 08:07 AM #8
-
-
04-07-2012, 08:09 AM #9
- Join Date: Feb 2012
- Location: United Kingdom (Great Britain)
- Posts: 4,646
- Rep Power: 65157
Great job. I've always wanted to make a solid axle. All of mine are made from thick wall scaffold tube. Those collars are exactly what I am after for my next project.
My training log:
---------------
http://forum.bodybuilding.com/showthread.php?t=153596291&p=1062453741#post1062453741
[]---[] Equipment Crew #43 []---[]
-!!!---!!!- No Excuses Homemade Equipment Crew #1 -!!!---!!!-
()---() York Barbell Club #4 ()---()
-
04-07-2012, 08:11 AM #10
-
04-07-2012, 08:30 AM #11
- Join Date: Feb 2012
- Location: United Kingdom (Great Britain)
- Posts: 4,646
- Rep Power: 65157
Thanks guys. So as it stands;
-!!!---!!!- No Excuses Homemade Equipment Crew #1 -!!!---!!!- ProtienandIron
-!!!---!!!- No Excuses Homemade Equipment Crew #2 -!!!---!!!- TXBRASS
-!!!---!!!- No Excuses Homemade Equipment Crew #3 -!!!---!!!- OhSoFocus
-!!!---!!!- No Excuses Homemade Equipment Crew #4 -!!!---!!!- OwasM
-!!!---!!!- No Excuses Homemade Equipment Crew #5 -!!!---!!!- keyboardworkout
Welcome soldiers. Ready your screwdrivers, and pick up your hammers... for tonight we shop in Lowes!!!! (US??) B&Q (UK)
Last edited by ProtienandIron; 04-07-2012 at 12:55 PM.
My training log:
---------------
http://forum.bodybuilding.com/showthread.php?t=153596291&p=1062453741#post1062453741
[]---[] Equipment Crew #43 []---[]
-!!!---!!!- No Excuses Homemade Equipment Crew #1 -!!!---!!!-
()---() York Barbell Club #4 ()---()
-
04-07-2012, 08:33 AM #12
-
-
04-07-2012, 08:42 AM #13
- Join Date: Feb 2012
- Location: United Kingdom (Great Britain)
- Posts: 4,646
- Rep Power: 65157
Irongrandpas rack;
This is like the Hattori Hanzo of homemade. Good work.My training log:
---------------
http://forum.bodybuilding.com/showthread.php?t=153596291&p=1062453741#post1062453741
[]---[] Equipment Crew #43 []---[]
-!!!---!!!- No Excuses Homemade Equipment Crew #1 -!!!---!!!-
()---() York Barbell Club #4 ()---()
-
04-07-2012, 11:14 AM #14
- Join Date: May 2009
- Location: Cambridge, United Kingdom (Great Britain)
- Posts: 10,482
- Rep Power: 211620
In!!!
I want number 6
BRB taking soome pics of stuff I have made or lashed to the ceiling as you will see.
Frankenbench
She started her life as a powetec WB-LMP but I decided that I needed to get in on the freeweight presses. I brought a rack and used the powertec for my shoulders and for the leglift accessory. I then wanted to start doing incline bench but the bulk of the leverage mechanism wouldn't fit in the rack so I made this new base section to attach the bench to.
Close up of wheels
Rust for OP
Wooden utility bench
I neede something to go in my new rack and I didn't want to buy a crappy bench with my limited funds. Frankenbench hadn't been conceived yet so I made this to fill the gap. People think wood is not strong enough for exercise equipment but this has been tested with all the weight I could find be it plates, people or kitchen utensils. I know from my tests that it is good for 600lbs!
Wooden dip station
I needed a dip station and didn't have the cash to buy one. One trip to B&Q with £15 in my pocket and voila a dip station has emerged. I'm currently toying with the ide of adding some kind of assistance mechanism to it soon as I have gained 20lbs in weigh since I last did dips and they are hard as ****!
Defecit platform
I use this for SLDL's to get a good stretch and I also use it for 6" defecit deadlifts. I didn't pay a penny for it either as I rescued it from a skip on a site I was working at. It's bloody strong as well as it had a 400kg pump on it originally!
40kg rock bag
I wanted a sandbag but didn't want to pay £125+ for one. This cost me £9 to make and weighs 40kgs. I'm going to add various straps to it soon. for more versatility. I use it for carries and rows. It really tests the grip!
Pullup bar
I had some 28mm dowel left over from the dip station and some blue rope. I wanted a pullup bar so I lashed it to the trusses of my garage roof...nuff said really!
Last edited by fishpat86; 04-07-2012 at 12:19 PM.
New Evolution shat on me
-!!!---!!!- No Excuses Homemade Equipment Crew #7 -!!!---!!!-
"Were not talking about bodybuilding you fking retard. We're talking about Gorillas"
-
04-07-2012, 11:37 AM #15
-
04-07-2012, 12:22 PM #16
- Join Date: May 2009
- Location: Cambridge, United Kingdom (Great Britain)
- Posts: 10,482
- Rep Power: 211620
Cable row attachment
Another simple story. I replaced the overflow from my water tank in the loft and had some 40mm PVC pipe left over. I cut two sections of and made an attachment for my low row pulley.
Monkey bars
I kid, I kid! I needed to free up some space so I lashed my ladder to the ceiling. Every inch counts when you train in a single car garage. I was thinking of securing it more permanently to the ceiling so I could use it as monkey bars but decide that I need to be able to get it down easily if I need to use it.
New Evolution shat on me
-!!!---!!!- No Excuses Homemade Equipment Crew #7 -!!!---!!!-
"Were not talking about bodybuilding you fking retard. We're talking about Gorillas"
-
-
04-07-2012, 12:55 PM #17
- Join Date: Jul 2010
- Location: Shiner, Texas, United States
- Age: 44
- Posts: 393
- Rep Power: 1794
I'm IN! #2
Bar Holder in top of my Icarian Power Rack:
Fat Grip Thor's Hammers
Log Bar
MORE to come.......
I also like to refurbish and customize with paint:
Added numbering and color coordinated bar lines to my rack:
New paint for some old Hampton Deep-Dish's (silver on black)
Last edited by TXBRASS; 04-07-2012 at 06:34 PM.
_______________________________________________________
-!!!---!!!- No Excuses Homemade Equipment Crew #2 -!!!---!!!-
_______________________________________________________
TXBRASS
"LIKE" us on ********: Get-a-Grip Personal Performance
*******************************************
Once you go RACK, you never go BACK.....
-
04-07-2012, 01:18 PM #18
- Join Date: Feb 2012
- Location: United Kingdom (Great Britain)
- Posts: 4,646
- Rep Power: 65157
@fishpat- THat bench and dip frame are excellent. Wooden benches take me back to the oldskool gym I trained at in the early days.
If built right, wooden benches are stronger then any man will ever need. You have a talent for woodwork thats for sure. Your photos
should be a sticky for any new member that says they cant afford a gym. Wood is readily available, relatively cheapcand easy to work with.
I am waiting for a reply off Irongrandpa as he go in first with a pic before I edited the first post. I'll announce the numbers after midday tommorrow
but at worst you will be #7.
@adaje41- You're damn right that gets you in. If I had the space I would build a platform for sure. Dip bars are great too. Mine are the same
but they are just welded on some U bar. Nice gym mate, would be happy yo see some more pics of it.
@TXBRASS- Welding is the ultimate skill to have for this thread. When I move house hopefully I will have the space to take it up myself, so I
may be PMing you for tips in the future. Keep the pics coming mate, they represent the elite of the homemade section.
Thanks for all the contributions so far lads, I can see this thread getting big in the future. It shows that Craigslist aint the only way to get cheap gym kit.My training log:
---------------
http://forum.bodybuilding.com/showthread.php?t=153596291&p=1062453741#post1062453741
[]---[] Equipment Crew #43 []---[]
-!!!---!!!- No Excuses Homemade Equipment Crew #1 -!!!---!!!-
()---() York Barbell Club #4 ()---()
-
04-07-2012, 01:33 PM #19
-
04-07-2012, 01:53 PM #20
- Join Date: Dec 2007
- Location: Florida, United States
- Age: 53
- Posts: 758
- Rep Power: 1354
I'll get in on this. I want number 13 it's my lucky number.
Reverse hyper. Made another one out of metal. Kind of sloppy an no pictures yet.
Attachment rack.
J-Hooks.
T-bar row.
Some have been updated and i've made some other stuff that i don't have pictures of yet. Plus i got a welder for Christmas.I'm not indecisive. Am I indecisive? - Anonymous
1st PL Comp. in 18 years.
March 24, 2012
Squat=410
Bench=325
Dead=500
Total=1235
-!!!---!!!- No Excuses Homemade Equipment Crew #13 -!!!---!!!-
-
-
04-08-2012, 01:03 AM #21
- Join Date: Feb 2012
- Location: United Kingdom (Great Britain)
- Posts: 4,646
- Rep Power: 65157
Some more recruits;
-!!!---!!!- No Excuses Homemade Equipment Crew #6 -!!!---!!!- irongrandpa
-!!!---!!!- No Excuses Homemade Equipment Crew #7 -!!!---!!!- fishpat86
-!!!---!!!- No Excuses Homemade Equipment Crew #8 -!!!---!!!- adaje41
-!!!---!!!- No Excuses Homemade Equipment Crew #9 -!!!---!!!- Skidmarx
-!!!---!!!- No Excuses Homemade Equipment Crew #13 -!!!---!!!- John-b-tLast edited by ProtienandIron; 04-08-2012 at 07:17 AM.
My training log:
---------------
http://forum.bodybuilding.com/showthread.php?t=153596291&p=1062453741#post1062453741
[]---[] Equipment Crew #43 []---[]
-!!!---!!!- No Excuses Homemade Equipment Crew #1 -!!!---!!!-
()---() York Barbell Club #4 ()---()
-
04-08-2012, 06:25 AM #22
Let me in !!!!!!! Shyt...number 7 is taken ???
I've made a ton of stuff over the last few years. Here's some of my fav work.
Seriously modded rack. I married my old bandit smith with my deltech rack. Cut the top of the rack and made it taller with custom pullup/chin bars, bar holders, etc. Also built in a lat pulldown system that uses the smith as the weight load. Works great !
Small bar work station. I love this for skull crushers and back rows. I added a 6 weight storage horns later on.
[]---[] Equipment Crew Member No 7
()---() York Barbell Club #7 ()---()
[]---[] Ivanko Barbell Crew #13 []---[]
-!!!---!!!- No Excuses Homemade Equipment Crew #9 -!!!---!!!-
-
04-08-2012, 06:30 AM #23
Pendulum leg press that I built a few months ago.
Weight vest rack. Everyone needs one of these, right?
Couple of bars. The straight bar was actually the original pullup bar on the deltech rack at one time. Found a better use for it.
there's more stuff but I don't feel like diggin out pics lol[]---[] Equipment Crew Member No 7
()---() York Barbell Club #7 ()---()
[]---[] Ivanko Barbell Crew #13 []---[]
-!!!---!!!- No Excuses Homemade Equipment Crew #9 -!!!---!!!-
-
04-08-2012, 07:12 AM #24
- Join Date: May 2009
- Location: Cambridge, United Kingdom (Great Britain)
- Posts: 10,482
- Rep Power: 211620
-
-
04-08-2012, 07:13 AM #25
-
04-08-2012, 07:20 AM #26
- Join Date: Feb 2012
- Location: United Kingdom (Great Britain)
- Posts: 4,646
- Rep Power: 65157
Homemade weightvest rack is what did it for me! Excellent kit Skidmarx. I'm on spread and recharge at the moment, but you'll be getting my apples soon.
My training log:
---------------
http://forum.bodybuilding.com/showthread.php?t=153596291&p=1062453741#post1062453741
[]---[] Equipment Crew #43 []---[]
-!!!---!!!- No Excuses Homemade Equipment Crew #1 -!!!---!!!-
()---() York Barbell Club #4 ()---()
-
04-08-2012, 10:01 AM #27
- Join Date: Jul 2010
- Location: Shiner, Texas, United States
- Age: 44
- Posts: 393
- Rep Power: 1794
Finished Thor's Hammers: (made from old EZ curl bar and two threaded dumbbell handles)
_______________________________________________________
-!!!---!!!- No Excuses Homemade Equipment Crew #2 -!!!---!!!-
_______________________________________________________
TXBRASS
"LIKE" us on ********: Get-a-Grip Personal Performance
*******************************************
Once you go RACK, you never go BACK.....
-
04-08-2012, 10:28 AM #28
- Join Date: Feb 2012
- Location: United Kingdom (Great Britain)
- Posts: 4,646
- Rep Power: 65157
Nice! I like the vintage look those colours give it. Great job.
BRB, I'm off to snap some pics of that hammer.My training log:
---------------
http://forum.bodybuilding.com/showthread.php?t=153596291&p=1062453741#post1062453741
[]---[] Equipment Crew #43 []---[]
-!!!---!!!- No Excuses Homemade Equipment Crew #1 -!!!---!!!-
()---() York Barbell Club #4 ()---()
-
-
04-08-2012, 10:34 AM #29
- Join Date: Jul 2010
- Location: Shiner, Texas, United States
- Age: 44
- Posts: 393
- Rep Power: 1794
_______________________________________________________
-!!!---!!!- No Excuses Homemade Equipment Crew #2 -!!!---!!!-
_______________________________________________________
TXBRASS
"LIKE" us on ********: Get-a-Grip Personal Performance
*******************************************
Once you go RACK, you never go BACK.....
-
04-08-2012, 10:53 AM #30
- Join Date: Feb 2012
- Location: United Kingdom (Great Britain)
- Posts: 4,646
- Rep Power: 65157
Ok here you go TXBRASS. I had this hammer made for me some time ago. I use it on a solid forklift tyre out in my garden. Its less of a swinging motion and more of a shoulder press and drop. Its great for heavy conditioning, and by the end of it every muscle in you body especially you back and shoulders, are ready to drop.
The handle is made out of 2in solid bright steel bar. The head is an 8inch long 4inch diameter bar. The whole thing is about 1 meter long. I havnt weighed it, but I estimate it to be about 40kg. I'll be the first to admit its ridiculus. But its a lot of fun.
My training log:
---------------
http://forum.bodybuilding.com/showthread.php?t=153596291&p=1062453741#post1062453741
[]---[] Equipment Crew #43 []---[]
-!!!---!!!- No Excuses Homemade Equipment Crew #1 -!!!---!!!-
()---() York Barbell Club #4 ()---()
Bookmarks