well, if ya feel that way....i'll just disappear. goodbye bodybuilding.com.
Stop pouting TC!!!! Hey why didn't you guys post pictures of your and RockCrusher's gathering like the guys on IH always do when they visit each other? I thought this picture of you two that you sent me was really nice.
()---() York Barbell Club #22 ()---()
[]---[] Ivanko Barbell Crew #36 []---[]
[Just couldn't take looking at that picture in this thread. . . .]
Good call.
Soooo.. Why does York's website suck so bad?
Can anyone help fill in the blanks here?
I'm looking for a 28mm bar that is 100% raw steel (sleeves and shaft).. It would ideally have bearings... and no center knurl would be swell.
I had previously written York off for failing to meet enough of these criteria but I just want to double check before I finalize an Oly bar purchase.
It appears that maybe the Elite bars do meet most of my criteria but I'm guessing those shafts are chromed???
Soooo.. Why does York's website suck so bad?
Can anyone help fill in the blanks here?
I'm looking for a 28mm bar that is 100% raw steel (sleeves and shaft).. It would ideally have bearings... and no center knurl would be swell.
I had previously written York off for failing to meet enough of these criteria but I just want to double check before I finalize an Oly bar purchase.
It appears that maybe the Elite bars do meet most of my criteria but I'm guessing those shafts are chromed???
It just does not exist. You could get 32011 which is a 28mm stainless bushing training bar with no center knurl, or the bearing competition version 32010 which has a center knurl. Both have chromed sleeves. They only other production bare steel they have is the B&R.
Other than the Milos, I can't think of anything that I have heard about. Someone over at IH mentioned a French dumbbell that might have pre-dated the 1902 shot loading canister bell. He described it as a canister shaped bell that was plate loaded (As I understood, plates went inside the can, instead of shot like Milo's). Alan Calvert was always patenting his new devices so presumable they were somewhat new. It seems like the Triplex might be the first hybrid bell that combined the old shot loading system with the new plate technology.
There were other dumbbells that were plate loaded but in a globe shape, like the go-go dumbbells. But they didn't have an outer globe shell like the Triplex and Duplex.
If it's French, I might have more info. in our archive. I'll look it up. There was one we have photos of, but I don't remember the date exactly and I don't want to speculate on the ol' 'net without having the info at hand.
()---() York Barbell Club #50 ()---()
Ivanko Barbell Company
official website: www.ivankobarbell.com
Join: //www.facebook.com/ivankobarbell
Follow: //www.twitter.com/ivankobarbell
Watch: //www.youtube.com/ivankobarbell
Newsletter: http://www.ivankobarbell.com/contact.html
Alright i'm back !!! you all know i have no feelings....attygirl, i accept your apology, sorry i caused you to miss sleep. LOL....krubs, SMNS. responding to this pic, it's such a shame to see GOOD PUSSY flushed away !!!!!!!!!!!!!!!!!!!!!!!!!
It just does not exist. You could get 32011 which is a 28mm stainless bushing training bar with no center knurl, or the bearing competition version 32010 which has a center knurl. Both have chromed sleeves. They only other production bare steel they have is the B&R.
Thanks GI.
That's what I thought but the York website descriptions left me second guessing. You're the man GI. If I ever move to Canada, I'll make sure to do business with ya.
I'm not opossed to buying used either.. if you happen to be in my area.. I wouldn't mind a pm.......
If it's French, I might have more info. in our archive. I'll look it up. There was one we have photos of, but I don't remember the date exactly and I don't want to speculate on the ol' 'net without having the info at hand.
It'd be interesting if Ivanko moved production to the U.S. if they'd become the "new" York....
Seriously though, they are Bur plates, the 40lber marked with the number 5. Not super common but not that rare.
Some hustler has been trying to sell them for over a buck a pound on EBay for about six months or so with no luck.
Seriously though, they are Bur plates, the 40lber marked with the number 5. Not super common but not that rare.
Some hustler has been trying to sell them for over a buck a pound on EBay for about six months or so with no luck.
i've seen that listing also, dude is a mega dealer. HE'S GOT SOME GOOD STUFF THOUGH, SUPER COOL GUY !!! those 40's are sweet jack, hold onto to them....true vintage iron.
I didn't have much of a problem selling a couple pairs of 20lb Bur plates for a tad over $1/LB a few months back. Now the BUR-BEL plates I'm holding on to... Those are worth serious cash
()---() York Barbell Club #22 ()---()
[]---[] Ivanko Barbell Crew #36 []---[]
i've seen that listing also, dude is a mega dealer. HE'S GOT SOME GOOD STUFF THOUGH, SUPER COOL GUY !!! those 40's are sweet jack, hold onto to them....true vintage iron.
I actually haven't bought them yet. Guy is asking for about .8/lb for them. Don't have any use for them though since they're standard (other than piling them up in the corner), and it doesn't seem like there's much margin to flip them.
Originally Posted by skrebs01
New kids on the block, just like MUTASSIN's favorite boy band
New kids on the block, just like MUTASSIN's favorite boy band
[img][img]
Rumor has it, Krebs is going to turn those Jacksons into blobs. I saw him at Home Depot buying a cutting wheel for his grinder and a face shield. He also had a used thong in his back pocket.
Picked up an 80's York Power Bar and a 70's York EZ-curl Bar with collars. The curl bar came with York's instructions and the hex wrench for the hex screws holding on the collars and sleeves. Pics to follow.
You need a rack, bench and 300-lb. Oly set. Now, what was your question?
()---() York Barbell Club #1 ()---() []---[] Equipment Crew #36 []---[] []---[] Ivanko Barbell Crew #51 []---[]
Skrebs I had 5 extra 35s last week but traded them I have one complete set left if interested shoot me a pm
Atty nice score looking forward to seeing pic
\YORK/ \BARBELL CLUB/ #23
"Bodybuilding is not just about Physical Training with weights to change how you look. Its also about Mind, Spirit & Body, together in union so that everything grows, not just your muscles."
-Serge Nubret
International deep dish plates are nice. i got the 45s and 35s, sold the 25s. i also have atlantic deep dish 45s, i believe they were made here in baltimore....HOME OF THE SUPER BOWL CHAMPION BALTIMORE RAVENS !!!
Discounts & Deals - Sign Up!
I hate chrome. 
Bookmarks