** KNEE DRAGGERS UNITE ** Part II

[sp00lin]

Rode home from work yesterday, route 93 N was nuts. Saw some guy on his phone doing 50 while traffic was at 75+.

RIP to that Jersey rider.


fixed and thanks

Yeah that too! Couple more weeks till I can get home and ride <3

http://mobile.nj.com/advnj/pm_31089/...tguid=WvPECdQL

Hope that works- I'm on my phone

[Ultra_Magnus]

One more month until I can go for my unrestricted license. Starting to get a bit excited and already looking for an upgrade from the Ninja 250. Ninja 250 was nice and I know I didn't ride it anywhere near it's limits but would like a bigger bike so I am not doing 9k rpm in 6th gear just commuting to work.

Thinking maybe naked bike or partial fairing and an engine that has a good amount of torque so I don't have to change gears all the time. I still want something light so I can have a bit of fun once in a while tho.

Dunno man, going to a bigger bike is a double edged sword. Yea you dont have to rev as high to get going and you have tnos of power at your disposal. But that wears off, and you will want to rev the **** out of your powerful bike and you will be going 120mph before you know it.

Thing i like bout 250's is you can wring the hell out of em and not totally be speeding by time u hit 6th gear.

I had a 250 and a 1200 for awhile. Sold the 250. Missed the ability to totaly beat the crap out of my bike so i went an bout another 250 just last week. Best decison i ever made. I havnt even looked at my 1200 this whole week.

[Barn01]

Anyone upgrade to stainless steel brake lines?? Good luck with Galfer or Fren Tubo??? Could use more feel as the initial bite comes on strong on my bike.

I have SS galfer lines on mine as well. Honestly they only make a diff on the track. I noticed NO diff on the street.

I changed everything in stages to see what yields what effect.

Lines
Fluid
Pads

Lines was the least effect on the street but once done, on the track I could go a full session and not have to click my Pazzo's up a number.
Fluid was done after lines and it gave me a more linear feel and again less total pull required during track sessions
Pads was by far the biggest and best change. I put on Vesrah RJL and they were heads and tails better than EBC HH. AMAZING initial bite and very linear stopping power. I can't rave about these enough.

[zannnn]

Just saw this zx10r for sale on one of the bike forums I frequent . hnnnnnnnnnnnnnnnnnngggggggggggggggggggggggg







List of mods:

* Factory solo cowl (pillion seat included in sale)
* Leo Vince Evo II carbon fibre slip on exhaust
* Leo Vince link pipe (factory muffler and boombox/cat included with sale)
* Bazzaz ZFI-QS fuel map and quickshifter
* Dynotune by Dynoverks
* Pipercross Race Air filter
* Driven block off plates
* Ohlins steering damper rebuilt ro race spec by Frank Pons @ Biketec
* Dunlop Q2 high performance tyres (no track days ever on the bike)
* Driven 520 conversion chain kit with DID EVO3 chain and -1/+1 sprockets (will also include a +2 rear sprocket). Original chain and sprockets included with sale.
* ASV C5 black full size brake and clutch levers
* Evotech frame sliders
* Evotech fender eliminator
* Evotech exhaust hanger (factory footpegs included with sale)
* Zero Gravity double bubble screen
* Galfer HH sintered front brake pads
* DDM 55watt HID conversion (high and low beam)
* CNC Quick release fuel cap
* Oxford sport heated grips - adjustable (fantastic on cold nights)
* Rifleman's 1/5 throttle insert
* Rear shock shimmed 6mm
* Clear tank pad
* Carbonadi (Italy) carbon fibre engine case covers
* Carbon look reflective wheel stripes
* Billet rego holder tube
* Black metal valve caps
* Race spools

AU$19,800

fuuuaaark, if I had the money...

[Jorge0886]

Just saw this zx10r for sale on one of the bike forums I frequent . hnnnnnnnnnnnnnnnnnngggggggggggggggggggggggg







List of mods:

* Factory solo cowl (pillion seat included in sale)
* Leo Vince Evo II carbon fibre slip on exhaust
* Leo Vince link pipe (factory muffler and boombox/cat included with sale)
* Bazzaz ZFI-QS fuel map and quickshifter
* Dynotune by Dynoverks
* Pipercross Race Air filter
* Driven block off plates
* Ohlins steering damper rebuilt ro race spec by Frank Pons @ Biketec
* Dunlop Q2 high performance tyres (no track days ever on the bike)
* Driven 520 conversion chain kit with DID EVO3 chain and -1/+1 sprockets (will also include a +2 rear sprocket). Original chain and sprockets included with sale.
* ASV C5 black full size brake and clutch levers
* Evotech frame sliders
* Evotech fender eliminator
* Evotech exhaust hanger (factory footpegs included with sale)
* Zero Gravity double bubble screen
* Galfer HH sintered front brake pads
* DDM 55watt HID conversion (high and low beam)
* CNC Quick release fuel cap
* Oxford sport heated grips - adjustable (fantastic on cold nights)
* Rifleman's 1/5 throttle insert
* Rear shock shimmed 6mm
* Clear tank pad
* Carbonadi (Italy) carbon fibre engine case covers
* Carbon look reflective wheel stripes
* Billet rego holder tube
* Black metal valve caps
* Race spools

AU$19,800

fuuuaaark, if I had the money...

F that. If you just dropped tha t much cash you could pay for +90% of the 1198S which would smoke that

[darkninja67]

I have SS galfer lines on mine as well. Honestly they only make a diff on the track. I noticed NO diff on the street.

I changed everything in stages to see what yields what effect.

Lines
Fluid
Pads

Lines was the least effect on the street but once done, on the track I could go a full session and not have to click my Pazzo's up a number.
Fluid was done after lines and it gave me a more linear feel and again less total pull required during track sessions
Pads was by far the biggest and best change. I put on Vesrah RJL and they were heads and tails better than EBC HH. AMAZING initial bite and very linear stopping power. I can't rave about these enough.

thanks brah. Heard the Vesrah pads are great.

I love white ZX10/6R's.

[Barn01]

Anyone upgrade to stainless steel brake lines?? Good luck with Galfer or Fren Tubo??? Could use more feel as the initial bite comes on strong on my bike.

Just saw this zx10r for sale on one of the bike forums I frequent . hnnnnnnnnnnnnnnnnnngggggggggggggggggggggggg

List of mods:

* Factory solo cowl (pillion seat included in sale)
* Leo Vince Evo II carbon fibre slip on exhaust
* Leo Vince link pipe (factory muffler and boombox/cat included with sale)
* Bazzaz ZFI-QS fuel map and quickshifter
* Dynotune by Dynoverks
* Pipercross Race Air filter
* Driven block off plates
* Ohlins steering damper rebuilt ro race spec by Frank Pons @ Biketec
* Dunlop Q2 high performance tyres (no track days ever on the bike)
* Driven 520 conversion chain kit with DID EVO3 chain and -1/+1 sprockets (will also include a +2 rear sprocket). Original chain and sprockets included with sale.
* ASV C5 black full size brake and clutch levers
* Evotech frame sliders
* Evotech fender eliminator
* Evotech exhaust hanger (factory footpegs included with sale)
* Zero Gravity double bubble screen
* Galfer HH sintered front brake pads
* DDM 55watt HID conversion (high and low beam)
* CNC Quick release fuel cap
* Oxford sport heated grips - adjustable (fantastic on cold nights)
* Rifleman's 1/5 throttle insert
* Rear shock shimmed 6mm
* Clear tank pad
* Carbonadi (Italy) carbon fibre engine case covers
* Carbon look reflective wheel stripes
* Billet rego holder tube
* Black metal valve caps
* Race spools

AU$19,800

fuuuaaark, if I had the money...

Not worth it if you ask me. The pipe, Bazzaz and tune are the only thing I'd feel give the bike extra value. The rest is just little stuff to make the list look bigger

[gr3g]

http://youtu.be/udu3Czcxa-Q

not me but..holy shi... someone embed pls.

[Barn01]

not me but..holy shi... someone embed pls.

Glad it wasn't me

[darkninja67]

What is the video of?? Cannot view at work

[gr3g]

What is the video of?? Cannot view at work

car on the freeway had a blowout. Came within inches of hitting a guy on a bike then hits the wall and almost hits another bike

[-MarkX-]

here you go brah

[darkninja67]

car on the freeway had a blowout. Came within inches of hitting a guy on a bike then hits the wall and almost hits another bike

Thanks brah, would rep you but you are under 10k............






fellow ZX6R owner?? repped

[Greek_Elite]

so motorcyclegear is doing this promo, buy joe rocket helmet (says made by HJC) for 270, get a gift card for 240 back, so your net cost is $30.. just puttin it out there if anyone lookin for a helmet

its this helmet: http://www.motorcyclegear.com/street...le_helmet.html

[CaseInCali]

Hey brahs, looking to buy a bike in the next few months.
I want to buy a used Honda CBR 250 or Kawasaki Ninja 250.

What's the best place to look for a bike? Local bike shops, craiglists?

Thanks for the help guys

[envied09]

Hey brahs, looking to buy a bike in the next few months.
I want to buy a used Honda CBR 250 or Kawasaki Ninja 250.

What's the best place to look for a bike? Local bike shops, craiglists?

Thanks for the help guys

craigslist. but go to the local bike shops to sit on them so you can see how you fit. the cbr and the ninja sit a bit differently, but they are both solid bikes, youll see much more ninja 250 on the road than the cbr but they are both solid.

[envied09]

rode my buddies 2011 ducati 1098, all i can say is that it makes my r6 feel like an RC car. may have to save for a ducati next.

[darkninja67]

Anyone ever ride the Suzuki B KIng or Kawasaki Mean Streak??

[Zuus]

so motorcyclegear is doing this promo, buy joe rocket helmet (says made by HJC) for 270, get a gift card for 240 back, so your net cost is $30.. just puttin it out there if anyone lookin for a helmet

its this helmet: http://www.motorcyclegear.com/street...le_helmet.html

this is a good deal, I have been considering buying a jacket and pants, this is a good way to get those plus a helmet for practically free

[JuiceBoxBrah]

Hey brahs, looking to buy a bike in the next few months.
I want to buy a used Honda CBR 250 or Kawasaki Ninja 250.

What's the best place to look for a bike? Local bike shops, craiglists?

Thanks for the help guys

Honestly brah if you are looking to keep the thing for awhile I would just start out with a 600. Person opinion.

[629]

gonna bring up taking the MSF course tonight to my dad wish me luck brahs

[Legsthetic]

Which one should i get honda cbr or suzuki gsxr?

[y0lked]

Honestly brah if you are looking to keep the thing for awhile I would just start out with a 600. Person opinion.

safety > hassle

[CaseInCali]

safety > hassle

Yeah thanks for backing me up on that one, I also have barely any riding experience so a 600 is intimidating.

[y0lked]

Yeah thanks for backing me up on that one, I also have barely any riding experience so a 600 is intimidating.

get a 250, you will have more fun riding. where u at in cali?

[samsuperjew]

Which one should i get honda cbr or suzuki gsxr?

are you looking at the cbr600rr vs the gsxr600? or larger bikes?

[WiggyWanka]

Need your opinion bros:

2007 GSXR 600

- 5,000 miles
- $5,500
- completely stock
- black

2007 GSXR 750

-13,000 miles
- $5,700
- Jardine exhaust, power commander, tinted wind screen

What would you do?

[y0lked]

Need your opinion bros:

2007 GSXR 600

- 5,000 miles
- $5,500
- completely stock
- black

2007 GSXR 750

-13,000 miles
- $5,700
- Jardine exhaust, power commander, tinted wind screen

What would you do?

depends on what ur gonna use it for and riding experience. Track days? Daily commute? Money for maintenance (valve adjustments on that 750).

[WiggyWanka]

depends on what ur gonna use it for and riding experience. Track days? Daily commute? Money for maintenance (valve adjustments on that 750).

Daily Commute and weekend riding. Maybe track days down the road. What is this valve adjustment on the 750 you speak of?

[Legsthetic]

are you looking at the cbr600rr vs the gsxr600? or larger bikes?

Yep, I can't decide between those 2.