***Perth Crew Thread***

[Gringo12]

Where you not the guy asking people to spy on his misses?

do u even notsrs ?

[tagsy]

do u even notsrs ?

so i shouldn't have been keeping an eye on her for you?

[Gringo12]

so i shouldn't have been keeping an eye on her for you?

were u? lol

[Blakeee]

anyone else still having cold showers in the morning now that winter has rolled in?

[damonzzzz]

anyone else still having cold showers in the morning now that winter has rolled in?

Can't afford to give up that test boost.

[ChackoshBrah]

I remember during my last undergrad sem I found it really hard to concentrate during the study break, so I thought I would try some alternative method to remedy this.....

I decided to try some dexies, I ended up taking 3....I didn't feel a thing so I decided to drink some coffee.

Still nothing....

Fam friends came over to visit my folks, my dad offered me another coffee, I accepted.

It slowly started to kick in, this lead to a 5 hour uninterrupted study session....I have slept properly since that night.

Good luck though brahs.

[Sadida76]

I remember during my last undergrad sem I found it really hard to concentrate during the study break, so I thought I would try some alternative method to remedy this.....

If only ******** was legal

[JM3K]

Just checked into Los Angeles

[conn1994]

back from 5th band camp lol,

my mind has been fcuked, had exams monday, tuesday and one more today - Sunday I woke up with the worst cold ever,
couldnt breath through my nose, head throbbing, felt anxious as fuark, went well though - economics today and then management next week

GL for all the uni perthies

[conn1994]

ps. 60g dextrose, 3 scoops jack3d in your waterbottle for exams for ultimate concentration and writing pumps (srs)

[FlowersBrah]

Seriously considering taking pwo for this exam
Has 3 hours sleep last night

Nothing too crazy, maybe just thermojet, it never hits me that hard. Will take a sachet and deduce how im feeling when I arrive

[Gringo12]

any of you cheeky kunts going to the murdoch ball?

[Swampduck]

just had mr whippy run by work... couldn't resist :*(

[TheRealOrson]

just had mr whippy run by work... couldn't resist :*(

Mr Whippy was found dead lying in his famous pink van today, covered in fudge, sprinkles and nuts.


Rumours are circulating that he topped himself.

[jeffaz]

Mr Whippy was found dead lying in his famous pink van today, covered in fudge, sprinkles and nuts.


Rumours are circulating that he topped himself.

[Laverna]

Yeah part 1 could get Fuarked, pretty sure I wrote illegible bull****, my mind was so scattered, the facta were too bloody long

Got 12.5 for my tute participation though so am faorly confidant I can plull out the necessary 38/85 in the exam to pass, my part 2 was pretty good even if it was a little short because I spent so long on q.1

Fuarked for Equity though - closed book - havent beento a single lecture so that spells diasater, plus I only have tonight and tommorrow to study, and I'm miscing right now - fuark

Only got 8/15 tute participation because mine fell on Anzac day and I didn't realise I was meant to go to Monday tute. Asked Greg on Wednesday if I could go to his Friday instead and he basically told me to fuk off.... brb lost 3.5 marks.

Equity wasn't TOO bad today. I forgot a lot as soon as I walked into room, but I managed to write some legible chit down. I only went to like 5 lectures but I watched them all. Now just property on Monday...

Good night sweet 76% law average, pretty sure this semester is gonna drop my average significantly.

just wait for corps next year. but you'll pass most likely. the law school doesn't want to fail people, because it would reflect badly on them

Not worried about Corps. In fact, I think I might like Corps. I always knew Equity and Con would be my least favourites haha.

[FlowersBrah]

Only got 8/15 tute participation because mine fell on Anzac day and I didn't realise I was meant to go to Monday tute. Asked Greg on Wednesday if I could go to his Friday instead and he basically told me to fuk off.... brb lost 3.5 marks.

Equity wasn't TOO bad today. I forgot a lot as soon as I walked into room, but I managed to write some legible chit down. I only went to like 5 lectures but I watched them all. Now just property on Monday...

Good night sweet 76% law average, pretty sure this semester is gonna drop my average significantly.




Not worried about Corps. In fact, I think I might like Corps. I always knew Equity and Con would be my least favourites haha.

Pretty sure im the most memerable student, probably because im fairly opinionated, tutors always know my name after the first class, really helps for tute marks backed up my 12.5 in con with 8 in equity

I am possibly the worst law student though, I went to the first couple and thennnnn, never again
I was literally learning what undue influence was on wednesday night, but im pretty sure I did fairly well

Cant wait to finish property and get on with holidays

[Jerry158]

Farkk finished all my exams. I have a really bad habit of leaving 45 min early..

[jawz1]

hey misc need some help with car problems my 1995 subaru liberty has a blown head gasket. i have got some quotes and its not really worth the fix. I also have a s13 silvia abut it has too many mods on it so will not pass the pits untill i get an engineer certificate.


anyone ever had experience doing the head gasket on a car??

[Gringo12]

is legit nobody going to the murdoch ball tomorow? fml i may have to actually hang out with my gf

[jeffaz]

hey misc need some help with car problems my 1995 subaru liberty has a blown head gasket. i have got some quotes and its not really worth the fix. I also have a s13 silvia abut it has too many mods on it so will not pass the pits untill i get an engineer certificate.


anyone ever had experience doing the head gasket on a car??

its time consuming bro. i have no idea how they do it on a subaru though... mitsubishi brah here. s13 unregoed?

is legit nobody going to the murdoch ball tomorow? fml i may have to actually hang out with my gf

tfw no gf

[SURGEPLAN]

is legit nobody going to the murdoch ball tomorow? fml i may have to actually hang out with my gf

[Thalo]

hey misc need some help with car problems my 1995 subaru liberty has a blown head gasket. i have got some quotes and its not really worth the fix. I also have a s13 silvia abut it has too many mods on it so will not pass the pits untill i get an engineer certificate.


anyone ever had experience doing the head gasket on a car??

Pull the heads off, replace the gaskets. Libertys are still a boxer engine right? Unless you know a little bit about working on cars or are mechanically minded I wouldn't attempt a head gasket. You will need a torque wrench. You will need a workshop manual to look up torque values for headstuds etc.

If the liberty is just your daily I wouldn't bother with it unless you really love the car/its mint interior and panel wise. Go pick up a cheap corolla with a service history. Don't worry about how many kms they have done, servicing is more important.

[Ashfrolicious]

Finished my exams yesterday brahs... masters in forensics @ uwa checking in.

[jawz1]

Pull the heads off, replace the gaskets. Libertys are still a boxer engine right? Unless you know a little bit about working on cars or are mechanically minded I wouldn't attempt a head gasket. You will need a torque wrench. You will need a workshop manual to look up torque values for headstuds etc.

If the liberty is just your daily I wouldn't bother with it unless you really love the car/its mint interior and panel wise. Go pick up a cheap corolla with a service history. Don't worry about how many kms they have done, servicing is more important.

yeh still a boxer so the heads are out the sides, means removing the engine if i want to change them. tossing up between doing the head gasket sealant stuff like chem weld, or doing the job myself. all i want is a car for one more semester of uni then i am happy to get rid of it by trading it in or selling it for parts... i know a bit about cars slowly learning by working on the silvia

[deepkick]

hey misc need some help with car problems my 1995 subaru liberty has a blown head gasket. i have got some quotes and its not really worth the fix. I also have a s13 silvia abut it has too many mods on it so will not pass the pits untill i get an engineer certificate.


anyone ever had experience doing the head gasket on a car??

Normally doing a head gasket isn't too bad, but on boxer engines the position of the head means you'll have to pull the engine out to do it properly, that's why you got quoted so much.

If you haven't done anything like that before it will probably take you a weekend with a mate to help you, plus you'll probably have to get the head machined.

[spentan]

Finished my exams yesterday brahs... masters in forensics @ uwa checking in.

what kinda forensics? where do you want to work in the future?

(Digital Forensics checking in)

[bromantic]

Pull the heads off, replace the gaskets. Libertys are still a boxer engine right? Unless you know a little bit about working on cars or are mechanically minded I wouldn't attempt a head gasket. You will need a torque wrench. You will need a workshop manual to look up torque values for headstuds etc.

If the liberty is just your daily I wouldn't bother with it unless you really love the car/its mint interior and panel wise. Go pick up a cheap corolla with a service history. Don't worry about how many kms they have done, servicing is more important.

you a mechanic brow? (srs)

[Thalo]

you a mechanic brow? (srs)

Nah just spend to much time and money working on my cars. Next project is a 400hp rb25 volvo 240 wagon, going to make custom coilovers all round, drop it on its guts, shortened axles, 10" dished steelies up the back, get the grinder and do a quick tub in the rear if i have to. When it gets stickered I'm going to just part it out and grab another 500 dollar blown motor special and switch the driveline over.

[jeffaz]

Nah just spend to much time and money working on my cars. Next project is a 400hp rb25 volvo 240 wagon, going to make custom coilovers all round, drop it on its guts, shortened axles, 10" dished steelies up the back, get the grinder and do a quick tub in the rear if i have to. When it gets stickered I'm going to just part it out and grab another 500 blown motor special and switch the driveline over.

inb4 stickered on fist skid round the block.