Found some on craigslist for .50 cents a pound, he has these for weights:
2 x 8 lbs.
2 x 10 lbs.
2 x 12 lbs.
2 x 15 lbs.
2 x 20 lbs.
2 x 25 lbs.
2 x 30 lbs.
2 x 35 lbs.
2 x 35 lbs.
2 x 40 lbs.
2 x 45 lbs.
2 x 50 lbs.
2 x 75 lbs.
I know this may seem like a dumb question, but right now I only have bench/squat set and want to start incorporating dumbbells into my workouts. I squat about 160, bench 135 just for reference but I want to be lifting much heavier in the future I'm 6"3
|
-
04-29-2011, 09:38 PM #1
What weight dumbbells should I buy?
-
04-29-2011, 10:02 PM #2
- Join Date: Oct 2008
- Location: Florida, United States
- Posts: 2,926
- Rep Power: 1579
All of them. If you don't have the space get adjustables. Don't make the mistake of just getting a few pairs. That's the best way to set yourself up for failure; unless you're a girl just looking to get toned and stay "fit".
______________________________________________________________
"All I want out of life is to be a monkey of moderate intelligence who wears a suit. Thats why I've decided to transfer to business school."
-
04-29-2011, 10:07 PM #3
-
04-29-2011, 10:22 PM #4
- Join Date: Oct 2008
- Location: Florida, United States
- Posts: 2,926
- Rep Power: 1579
The thing is there are so many exercises that you can do with free weights. 8lbs is a pretty decent amount for things like a lateral raise. When you're buying a set of fixed weights there are going to be some that may collect dust. The trouble is at one point that set probably didn't collect dust. You had to earn the right to put that set on the back burner by progressing through it and increasing your strength. If you're worried about not using every set I'd look at an adjustable pair.
______________________________________________________________
"All I want out of life is to be a monkey of moderate intelligence who wears a suit. Thats why I've decided to transfer to business school."
-
-
04-29-2011, 10:24 PM #5
- Join Date: Sep 2005
- Location: Atlanta, Georgia, United States
- Posts: 21,492
- Rep Power: 1368331
Eh, if I was just starting out, I wouldn't mess with anything below the 20lbs.
But, if you wanted the 10s and 15s that's cool...I just wouldn't waste the money on the 8s and 12s....
From there buy as heavy as you think you'll need/want/can afford."Hard work beats talent when talent doesn't work hard"
The more I workout at commercial gyms, the more I hate commercial gyms.
Psalms 144:1
Praise be to the Lord my Rock, who trains my hands for war, my fingers for battle.
-
04-29-2011, 10:26 PM #6
- Join Date: Feb 2011
- Location: Lockport, New York, United States
- Age: 50
- Posts: 1,195
- Rep Power: 6900
You've got a couple of options and both will require a decent chunk of change. If you have the cash and the space then you can go with a set like you're looking at and just try to fill in the gap between 50lbs and 75lbs. Then as you get stronger you may have to add on up to the 100 or 120lb range. Not as expensive but still nothing to sneeze at you can go the adjustable dumbbell route. If you do a search here you will come up with hundreds of threads on the subject but to save you some time you just need to remember two names Powerblock and Ironmaster. If your budget is limited and you are patient then you can cruise your local craigslist where powerblocks should show up every now and then and individuals and sets show up pretty regularly depending on your market.
-
04-29-2011, 10:36 PM #7
- Join Date: Sep 2005
- Location: Atlanta, Georgia, United States
- Posts: 21,492
- Rep Power: 1368331
Also...don't be married to the idea of fixed weights too. Depending on the deal (and your needs) buying handles and pancake plates might be a good route to look into....
"Hard work beats talent when talent doesn't work hard"
The more I workout at commercial gyms, the more I hate commercial gyms.
Psalms 144:1
Praise be to the Lord my Rock, who trains my hands for war, my fingers for battle.
-
04-29-2011, 10:41 PM #8
-
-
04-29-2011, 10:59 PM #9
Unless you have a lot of money and space your better off in the long run with adjustable dumbbells IMO.
You can get some cheap spin lock handles for $5 a piece at Walmart. If you get three sets then you don't have to change weights very often during your workouts. You can also get some used weights off Craig's list or look for a deal at a local store.
Alternatively, get some ironmasters or power blocks. Just make sure the PB are upgradeable in case you want to increase their weight capacity later on. Both can be upgraded to over 120lbs which is great.
Good luck.
The list of dumbbells your looking at goes up to 50lbs and then jumps to 75lbs.
-
04-29-2011, 11:19 PM #10
- Join Date: Mar 2011
- Location: Hawaii, United States
- Posts: 159
- Rep Power: 1200
If you can afford it, I would go with Ironmaster
http://ironmaster.com/store/Quick-Lo...Rack-pr-2.html
Saves space
2.5 lb increments
I would much rather jump 2.5 than 5.0 when increasing weight
And gradually increasing weight is the name of the game
-
04-30-2011, 12:05 PM #11
Appreciate the help guys. Man, those adjustable dumbbells are sweet, but a little too expensive for me. I would love to just buy some handles and use the weights that came with my bench press, but they don't fit. I have boughten handles and both walmart and target but the handles from both places were too small for the weights that fit on the bench press bar. And like you guys said, the weights on the craigslist ad jump from 50-70.
Would I even need that high of weight though? I can use the barbell for bench press and squats, so I would only need the dumbbells for flys and raises, maybe I could just buy up to 35?
-
04-30-2011, 12:23 PM #12
-
-
04-30-2011, 12:31 PM #13
- Join Date: Mar 2011
- Location: Hawaii, United States
- Posts: 159
- Rep Power: 1200
From their website
Adjust from 5-75 lbs each in 2.5 lb increments in just seconds. (75 lbs each dumbell = 150 lbs total)
Set includes two handles with four locking screws, 24 ea. 5 lb plates and 4 ea. 2.5 lb plates. Handles weigh 5 lbs empty and each locking screw weighs 2.5 lbs so the starting weight is 10 lbs each dumbbell before plates are added. 65 lbs of plates can be put loaded on each handle.
-
04-30-2011, 01:06 PM #14
So expensive though! there is one of those on craigslist right now for 300 it goes up to 50 lbs, I just don't know if I need that high of weight do I? I would be using dumbbells for what? Flys and raises right? I haven't done them before so I don't know how heavy it genearlly goes, I just don't want to waste money I dont have much, and I have barbell for other exercises! What do you think?
-
04-30-2011, 01:33 PM #15
It depends how serious you are with your workouts and how far your going to take them. It's true you don't need the ironmaster and could get away with spin lock dumbbells. It's just that the ironmasters are more convenient and faster to use and more weight can be used among other benefits. The thing about dumbbells are they are one of the best investments you can make for a home gym. The number of exercises you can perform and the muscles you can work with them make them the most versatile piece of equipment you can have which is why most people here spend the money on nice ones.
Dumbbells are also good because they require you to use stabilizing muscles when you do certain things such as benching. I like having the ironmasters because when you start doing things like lawnmowers and other back exercises you quickly go up in the weight you can do and it soon becomes necessary to upgrade to the 120lb kit.
It's all up to you though. If your a very, very casual lifter then stick with the cheapest thing possible but if you are trying to put on some muscle mass or get stronger and are going to spend a good amount of time over the next two years or more lifting weights then the investment would be worth it. Just look into different routines you can do with dumbbells.
-
04-30-2011, 01:38 PM #16
- Join Date: Feb 2011
- Location: Lockport, New York, United States
- Age: 50
- Posts: 1,195
- Rep Power: 6900
There are so many exercises that can be done with dumbbells not just raises and flys. Too many to list. You could do a pretty respectable full body routine with just dumbbells if need be. Two exercises that I do where a heavier dumbbell is needed are single arm bent rows and shrugs. There are others of course especially if you decide to use them as a variation or supplement to barbell exercises like squats or deads. Just try to get the best you can afford and keep in mind that whatever you get you will want to expand it in the future.
-
-
04-30-2011, 01:46 PM #17
In the long run it's going to be much cheaper to get adjustables. For the most part - no matter what sizes you get, you will eventually out grow them.
My Journal (RIP 05/11 - 09/13):
http://forum.bodybuilding.com/showthread.php?t=134256491
DIY Plyo Boxes:
http://forum.bodybuilding.com/showthread.php?t=151765733
-
04-30-2011, 02:02 PM #18
-
04-30-2011, 03:32 PM #19
- Join Date: Sep 2009
- Location: Palm Bay, Florida, United States
- Age: 32
- Posts: 49
- Rep Power: 0
In my opinion, judging by your situation you should pick up some standard spinlock dumbbell handles and 10/5/2.5 lb standard plates.
Buying this guys dumbbells, even up to 35 lbs, is going to cost you ~$150 already.
You can pick some cheap handles up at Walmart for ~$5. The $5 handles should allow you to go at least up to ~80 lbs per dumbbell, and the thing is is, you can just buy as many standard plates as you want right now, and as you "outgrow" them and get stronger, just buy more to make heavier dumbbells. You can also invest in better dumbbell handles in the future; they sell longer ones that would hold more weight than the $5 ones, so when you exceed the limits of the $5 handles you can just buy a longer handle and still put all those weights you bought to good use. You may even want to buy multiple sets of handles and have them all set up with different weights so you don't have to bother with switching weights between exercises.
Here is a link to the dumbbell handles at Walmart:
http://www.walmart.com/ip/Gold-s-Gym...-Ends/11089965
With Walmart's return policy you could always just return them if you find out it's something you don't want. You may also want to try to look around craigslist for people selling their handles (often comes with weight).
As for the standard plates, you can usually find them cheap on craigslist, and I believe Walmart may also sell them (not sure on prices though). You may want to try a local used sports store like Play It Again Sports.
Anyways, you would be $5 into $150, so even if you bought standard plates @ $1/lb (you should be able to find them way cheaper though) you can get at least 140 lbs of standard plates, which would be an adjustable 70 lbs per dumbbell for the price you would have spent on fixed dumbbells up to 35 lbs.
Ultimately it is your decision, but this is what I would do in your situation. It saves time and money, and will be very upgradeable in the future.
-
04-30-2011, 04:26 PM #20
-
-
05-01-2011, 06:34 AM #21
-
05-01-2011, 06:53 AM #22
- Join Date: Sep 2009
- Location: Palm Bay, Florida, United States
- Age: 32
- Posts: 49
- Rep Power: 0
Here is what they say about it in the manual:
3. It is possible to use the dumbells with an uneven number of plates on either end of a handle. It is not recommended to use more than 5 lbs offset. To make a small 2 ½ lb incremental weight change, simply add one 2 ½ lb plate to one end of the handle and position your hand slightly closer to the heavier end of the dumbell for good balance.
-
05-01-2011, 07:33 AM #23
Using one 2.5lb weight on one side of the handle works fine. If its that big of a deal, buy some 1.25lbs weights, throw them on there when you want to adjust in 2.5lb increments. it isn't really necessary, but it will work and you won't have to worry about using unbalanced weights....lol.
Last edited by Keetman; 05-01-2011 at 07:39 AM.
▪█─────█▪ Equipment Crew #4 ▪█─────█▪
Ivanko Crew #9
York Barbell Crew #13
-
05-01-2011, 09:51 AM #24
-
-
05-01-2011, 02:20 PM #25
Don't Do What I Did!
I was in the same situation as you a few years ago. I purchased a rack of dumbbells that went up to 50lbs thinking that would be sufficient for a while. If you are training with the right techniques, and feeding your body to build mass/strength, you will quickly get stronger - especially if you are 6'3" and only benching 135lbs.
Don't purchase a set of dumbbells based on what you are able to lift now, but on what you hope to be lifting in the future. Your best option is to pay for adjustable dumbbells that go up to 90 or 100lbs. That will cost you around the same amount and will give you much more resistance for when you grow stronger. Not to mention they will save you a ton of space!
If you need larger dumbbells than that in the future, you can just buy dumbbells one set at a time. For instance, I am now doing bent over rows with 100lb dumbbells. I just went out and bought a set of 100lb dumbbells when I needed them.
You are better off over-planning than under-preparing!Get Ripped Now - http://Rip****ut.com
"People seldom improve when they have no other model but themselves to copy after."
-
05-01-2011, 03:30 PM #26
-
05-01-2011, 03:45 PM #27
Yes.
No.
If anybody reads this and doesn't understand why....search it, there's plenty of info out there. They suck.
Your advice on adjustable db's is good advice, the selectecs are just junk though. Powerblocks, Ironmasters, or spinlocks are all viable options.▪█─────█▪ Equipment Crew #4 ▪█─────█▪
Ivanko Crew #9
York Barbell Crew #13
-
05-01-2011, 05:09 PM #28
-
-
05-01-2011, 07:40 PM #29
- Join Date: Oct 2009
- Location: Charlotte, North Carolina, United States
- Posts: 6,057
- Rep Power: 34678
I am probably too late but based on your strength levels I would pick up a pair of 20's and 40's. This would be a $60 investment and would allow you to perform the majority of the exercises that you will need, while staying in an effective rep range. The 20's can be used for things like curls, triceps extensions, side raises, and military press. The 40's can be used for bench, incline bench, and rows. Assuming that you will be working your lower body you can also do lunges and stiff-leg deadlifts with the 40's.
At $.50/lb that is a good price but is not unheard of, you can pick up a pair of 50's or 60's once the 40's are too light (or look at other options like plate load dumbbells - depending on what is available).Pro Strongman & Former National Champion
PR Gym Lifts -> Front Squat 515 Lbs / Deadlift 700 lbs / Strict Press 325 lbs
Website | www.mutaffis.com
Instagram | www.instagram.com/tmutaffis
******** | www.********.com/StrongmanTomMutaffis
YouTube | www.youtube.com/tmutafs
Similar Threads
-
What weight of dumbbells should I buy? How to gaine arm mass/muscle?
By Nankerphelge in forum ExercisesReplies: 32Last Post: 02-14-2018, 06:39 AM -
what weight gainer should i buy
By nath123 in forum SupplementsReplies: 11Last Post: 09-19-2006, 07:03 PM -
what weight gainer should i buy?
By luis ortiz in forum Teen BodybuildingReplies: 2Last Post: 05-09-2004, 04:41 PM -
I'm 15, what protein shake should i buy?
By BUFFY in forum SupplementsReplies: 1Last Post: 02-18-2002, 06:06 AM
Bookmarks