The OR is Officially DEAD? Insomn+buddies chat OR related

[jafomofo]

thought some of you gay boys might like this guys tattoos. From another forum.

[Hartski]

I actually do like that ink. I should get a tatoo of the Revoloution since I had a lot of ancestors fighting in the war, and one that even signed the Declaration of Independance.

[LAWLER89]

I've actually been thinking about getting some Gadsden-inspired ink for the last week or so; srs.

[jafomofo]

most of the tattoos I see that are similar are kind of sketchy but both of this are really well done imho.

also, hartski, your family into genealogy? My mom was into all of that. She was a bigwig of sorts in the DAR and colonial dames. Traced our parternal line all the way back to ardnamurchan scotland.

[cavymeister]

2nd shot from 140 yards out, 10 feet lower than the hole. I promptly two-putted it, but was very happy with the approach. First putt was about 6 feet from the hole. 2nd putt was about 8 feet.

[Hartski]

Jealous, Cavy! There's a severe winter storm bearing down on us at the moment, and I really want to get out and golf!

jafomofo, I have a huge book on my family history, going back to when my first ancestors came over from Germany in the early 1700's. I'd have to go over to Germany to go back any further. Or maybe try the Ancestry.com.........

[insomniac23]

meh, not really feelin that ink :/

this however,


i can



in b4 lawlr calls me a *******

[lhprop1]

I recently built an AR and I got the barrelled upper assembly from PSA. After finding some ammo, I took it to the range. At 25 yards, I was consistently shooting 3 1/2" to 4" to the right. After cranking the rear sight as far left as it will go, I finally got it zeroed.

This might sound strange, but is it possible the front post was put on crooked? Is it a fairly easy fix to adjust it?

[Farley1324]

I recently built an AR and I got the barrelled upper assembly from PSA. After finding some ammo, I took it to the range. At 25 yards, I was consistently shooting 3 1/2" to 4" to the right. After cranking the rear sight as far left as it will go, I finally got it zeroed.

This might sound strange, but is it possible the front post was put on crooked? Is it a fairly easy fix to adjust it?

Yeah...something isn't quite right there.

Pics of sights?

[jafomofo]

meh, not really feelin that ink :/



in b4 lawlr calls me a *******

someone needs to have intervention so we can all beat the new jersey out of this young man. There is still hope for him.

[lhprop1]

Yeah...something isn't quite right there.

Pics of sights?

This is what someone on another forum told me.

"It could very well be since this sounds exactly like the problem Century had with their Cetme's.
If that is the case then here's the deal.
The front sight post contains the gas block and is pinned in place.
You would need to redrill the hole for the pin in either the barrel, or the sight, in order to keep the drill from walking , or just following the original hole you would need to have the old hole filled with weld .
the other choices are measure from the holes to the bottom centerline of the part on each side the one that is different from one side to the other needs to be replaced.
Otherwise replace both parts."

I'll take it to a gunsmith this weekend and see if that's what the problem is.

[Farley1324]

Gunsmith is a good idea. Or back to PSA (who knows how long that could take). That's not something to do yourself unless you REALLY know what you are doing.

Slightly off topic...this is one of the reasons I pay a little bit more and buy from the likes of BCM. It would be less likely to happen and probably take 1/20 the time to get fixed by them on their dime if it did.

[LAWLER89]

Slightly off topic...this is one of the reasons I pay a little bit more and buy from the likes of BCM. It would be less likely to happen and probably take 1/20 the time to get fixed by them on their dime if it did.

Buying quality parts? Okay, you f*cking elitist brand whore.

[Farley1324]

Guilty.

You in the market for some more mags?

When does your ban take effect?

[insomniac23]

Gunsmith is a good idea. Or back to PSA (who knows how long that could take). That's not something to do yourself unless you REALLY know what you are doing.

Slightly off topic...this is one of the reasons I pay a little bit more and buy from the likes of BCM. It would be less likely to happen and probably take 1/20 the time to get fixed by them on their dime if it did.

i knbew you'd have a response like this you turd.


so much drama at work, fawk. ended up in a 4 hour meeting at work on my day off


got 245x4 on flat bench today, personal best

[cavymeister]

i knbew you'd have a response like this you turd.


so much drama at work, fawk. ended up in a 4 hour meeting at work on my day off


got 245x4 on flat bench today, personal best

why is there a 4 hour meeting at a gym?

[Farley1324]

i knbew you'd have a response like this you turd.

Would you rather discuss the proposed legislation up there in New Jersey?

[LAWLER89]

When does your ban take effect?

Once it passes the Senate and Hickenlooper signs off on it (which sure as sh*t he will if it hits his desk; dude is a granola Boulder type to the T).

Too bad I'm still gonna be up the mountain shooting and driving over sh*t until I get a move arranged.

[insomniac23]

why is there a 4 hour meeting at a gym?

because @ _A Fitness theres multiple managers (from sales+training+front desk) and workers answer to multiple bosses.

basically a non-stop chit show when everyone isnt on the same page

Would you rather discuss the proposed legislation up there in New Jersey?

no thank you

Once it passes the Senate and Hickenlooper signs off on it (which sure as sh*t he will if it hits his desk; dude is a granola Boulder type to the T).

Too bad I'm still gonna be up the mountain shooting and driving over sh*t until I get a move arranged.

GJDM

[jafomofo]

Gunsmith is a good idea. Or back to PSA (who knows how long that could take). That's not something to do yourself unless you REALLY know what you are doing.

Slightly off topic...this is one of the reasons I pay a little bit more and buy from the likes of BCM. It would be less likely to happen and probably take 1/20 the time to get fixed by them on their dime if it did.

didnt you just buy your first BCM like a week ago? I don't necessarily disagree but you definitely have an issue with fanboyitis.


Unrelated note, anyone have or haev experience with a remington 700 sps AAD-SD?

http://www.remington.com/products/fi...al-aac-sd.aspx

[Farley1324]

didnt you just buy your first BCM like a week ago? I don't necessarily disagree but you definitely have an issue with fanboyitis.


Unrelated note, anyone have or haev experience with a remington 700 sps AAD-SD?

http://www.remington.com/products/fi...al-aac-sd.aspx

I've been following the PSA saga for some time, and I am well aware of their delays doing, well, anything.

There are many things a wise man can learn with a little research

For example, I know that I would hate the laws in New Jersey. I don't have to actually go and live there to figure that out.

[insomniac23]

didnt you just buy your first BCM like a week ago? I don't necessarily disagree but you definitely have an issue with fanboyitis.


Unrelated note, anyone have or haev experience with a remington 700 sps AAD-SD?

http://www.remington.com/products/fi...al-aac-sd.aspx

if ur not gonna get a can i would just get the SPS Tac and either get a PSS stock off snipershide or any other FF stock of your choice.

[Mr.Goodtimes]

didnt you just buy your first BCM like a week ago? I don't necessarily disagree but you definitely have an issue with fanboyitis.


Unrelated note, anyone have or haev experience with a remington 700 sps AAD-SD?

http://www.remington.com/products/fi...al-aac-sd.aspx

I'd spend the extra money and get a 20in 5R

[ABSPR]

until I get a move arranged.

you moving to jersey or NY ?

[Turbomunkey]

I decided to fantasize a little and see what dsa was getting for their fals. Base models are 1700 now, 500 dollar increase. Goodnight sweet fal dreams

[LAWLER89]

you moving to jersey or NY ?

Yup. Gonna trade in my Jeep for a Yaris, go vegetarian, and join a grassroots Obama support firm.

[lhprop1]

Yup. Gonna trade in my Jeep for a Yaris, go vegetarian, and join a grassroots Obama support firm.

Don't half-ass it. Go vegan or go home.

[cavymeister]

Yup. Gonna trade in my Jeep for a Yaris, go vegetarian, and join a grassroots Obama support firm.

I highly recommend this. I've been a vegetarian for years. Although I do cheat a bit. I won't eat meat unless it's fish, pork, chicken, beef, lamb, shell fish, or human.

[lhprop1]

I highly recommend this. I've been a vegetarian for years. Although I do cheat a bit. I won't eat meat unless it's fish, pork, chicken, beef, lamb, shell fish, or human.

No venison, horse, or duck?

You dirty, long-haired, communist, Prius-drivin, blackfoot hippie.

[Turbomunkey]

http://forum.bodybuilding.com/showth...hp?t=152068883