TestE @ 400mg/ml + Eq @ 400mg/ml

[VooDooMan]

Hello every one, this thread will be a quickie!
Making some homebrew stuff here.........and after searching over 4 boards + or - 35-40 threads and several hours, I havent found a definative answer

Best I can find is

Test E @ 400mg/ml needs 2%BA and 20% BB, For a relativly painfree shot and not crash

Eq @ 400mg/ml needs 2-3% BA and BB ranging from 6-20%.
Can any one confirm the eq for me, some one who has actully done it and is confident their numbers are legit........I was thinking 2% BA and no BB


Thanks guys!!

[jude-o]

I wouldn't skip the benzyl benzoate if you're using conventional oils. For 400 mg/ml, I'd definitely use ethyl oleate as your oil (great stuff; thin, high carrying capacity, usually painless.)

[VooDooMan]

I am using grapeseed and was thinking 2%BA-10%BB Eq and 2%-20 for the test

what do you think?

[jude-o]

I don't know if you'll be able to get 400 mg/ml to stay dissolved in just grapeseed oil. *shrug* Maybe.

[VooDooMan]

Of course it possible
Especially with eq.........hence why I posted the thread, this is possible and it exists, but who knows damn it!

thanks

[maffie2]

ba is always needed for it's anti-microbial effect, no matter how soluble it is in oil (even in oil only).

[VooDooMan]

yes yes of course!
2-20 I guess

[The big guy]

I have done both, the EQ is already oil, so you don't even need the BB, but def the BA, for antibacterial, you could add BB to thin it a little because the EQ is thick and you could go with a 50 50 oil and EO to make it thinner, and the Test E 2/20 is fine for 400mg, and you can do the 50 50 for that as well to make it thinner, I use EO and I don't find it to make things less painful but thinner so the pin is smaller gauge which help with pain compared to a roofing nail sized pin and it helps with Med, and short ester do to pinning EOD or ED..

[VooDooMan]

thanks big guy. good info!

I want to stick to grapeseed oil for now, I wonder if I can shoot my conversion with 25ga?!

thanks

[The big guy]

Originally Posted by VooDooMan

thanks big guy. good info!

I want to stick to grapeseed oil for now, I wonder if I can shoot my conversion with 25ga?!

thanks

I only use GSO, and use 25ga, and I draw out with a 21ga.

[VooDooMan]

Thanks........I wonder why does every one draw and shoot with differnt needles!

I mean why cant you draw and shoot with 23, or draw and shoot with 25?

thanks

[bmfbull]

I always draw with a bigger guage, it's alot quicker.
Draw with 18g
Shoot with 22g or 25g

[VooDooMan]

I guess drawing and shooting with 25 is fine......Other then tim savings it makes no relevant issue.

I am going to stick to 25ga.
thanks guys

[meanmo]

Originally Posted by VooDooMan

Hello every one, this thread will be a quickie!
Making some homebrew stuff here.........and after searching over 4 boards + or - 35-40 threads and several hours, I havent found a definative answer

Best I can find is

Test E @ 400mg/ml needs 2%BA and 20% BB, For a relativly painfree shot and not crash

Eq @ 400mg/ml needs 2-3% BA and BB ranging from 6-20%.
Can any one confirm the eq for me, some one who has actully done it and is confident their numbers are legit........I was thinking 2% BA and no BB


Thanks guys!!

I use 3% ba and 9%bb with both EQ and test.. the best oil I have found is EO aka Ethyl Oleate.. its very thin and painless

[The big guy]

Originally Posted by VooDooMan

Thanks........I wonder why does every one draw and shoot with differnt needles!

I mean why cant you draw and shoot with 23, or draw and shoot with 25?

thanks

Because it is quicker, and putting the pin in the stopper that you are going to pin with, dulls the pin, I like it to be as sharp as possible when I pin, no pain..

[maffie2]

Originally Posted by momod

I use 3% ba and 9%bb with both EQ and test.. the best oil I have found is EO aka Ethyl Oleate.. its very thin and painless

you have any filtration problems?