**OFFICIAL** -Misc Car Crew- 1st Pass

[juju_BEAN]

Originally Posted by Mj23foreva

2008 Mitsubishi Evolution X GSR

350WHP 365WTQ

no point in swirling out your license plate if you didn't black them out in the video lolz

[Ascendent]

lulz^^^

I'm going to be in and out of here for a bit, gents. Just showed up to my new job in Spain.

[MusclePrime]

So, I have a 2004 Toyota Corolla sport. I know nothing about cars. I needed to know how big the wheels were. They are stock.

[Matheoperez]

FUKC, car is out of business for a min. Went to go to the gym last night and it wouldnt start and getting a P0106 code. Trying to figure this **** out now..... FML

[shift_destroy]

......yep..... it's ****ing toast.

[Matheoperez]

Originally Posted by shift_destroy

......yep..... it's ****ing toast.

WHAT THE **** HAPPENED?!?!?!?! You ok bro?

[snobo4rder08]

have had the balt for sale for awile now and cant seem to get a good price for it so looks like i will be peiceing together a turbo kit over the winter and twin charge it (supercharged and turbocharged) come spring time. No turbo lag FTW

I think i am just going to run a medium turbo since the supercharger will be thrusting air into it so i can get away with zero to no lag, maybe a GT30 and hopefully hit 500whp.

I have seen stock internals take 575whp for over a year with no problems so i think i would be safe until i can build up internals. Will need a new clutch tho


hoping to hit low 11's at high 120's

[shift_destroy]

Originally Posted by Matheoperez

WHAT THE **** HAPPENED?!?!?!?! You ok bro?

Drunk driver. He drove onto my side of the road it was either hit him or go off the road. it's pretty much totaled and the block is cracked. 12pt roll cage and 5pt harness saved my life, I have some scrapes and cuts from climbing out but other than that I just have a severe case of the grumps.

[snakebite52]

whats goin on. just checking in. nothing exciting yet, but waiting for spring to get a car. srt4 or high mileage evo 8 if i dont sell my dirtbike but if i can afford it, a evo9 or 03-04 cobra would be nice.

[Matheoperez]

Originally Posted by shift_destroy

Drunk driver. He drove onto my side of the road it was either hit him or go off the road. it's pretty much totaled and the block is cracked. 12pt roll cage and 5pt harness saved my life, I have some scrapes and cuts from climbing out but other than that I just have a severe case of the grumps.

Damn man, that sux. Glad to hear you came out alright though. ****ing drunk drivers. He have insurance?

[PolishSasquatch]

Originally Posted by 1987GN

man I tried learning that when I got into competition sound systems. (sound waves/airflow) that **** was HARD.

studying that next semester and the rest of my university program. automotive engineering ftw

[PolishSasquatch]

Originally Posted by shift_destroy

Drunk driver. He drove onto my side of the road it was either hit him or go off the road. it's pretty much totaled and the block is cracked. 12pt roll cage and 5pt harness saved my life, I have some scrapes and cuts from climbing out but other than that I just have a severe case of the grumps.

damn man that sucks losing your ride Makes me want to put a cage in mine jsut for personal security

[juju_BEAN]

damn...

sucks about that 240.

insurance gonna pay for all those mods?

[Ascendent]

Sucks, shift. Glad to see you're ok, but ****ty about the car.

[shift_destroy]

Insurance isn't paying for **** but it's whatever. I almost died again today...I was in the left lane going about 50mph with an suv was next to me and he decided to get over, i beeped and he didn't seem to care and he was inches from hitting me when i swerved into ON COMING TRAFFIC and nearly got ****ing nailed by another suv, luckily that guy swerved and nobody was next to him. 20 seconds later he pulls up next to me and says "sorry it was my fault!" like really? no **** ******* you almost ****ing killed me.

[lol_face3]

nice cars brahs...

I have a 03 jetta 1.8t, with APR chip and 2.5" turboback

makes for fun times

[Ascendent]

Originally Posted by shift_destroy

Insurance isn't paying for **** but it's whatever. I almost died again today...I was in the left lane going about 50mph with an suv was next to me and he decided to get over, i beeped and he didn't seem to care and he was inches from hitting me when i swerved into ON COMING TRAFFIC and nearly got ****ing nailed by another suv, luckily that guy swerved and nobody was next to him. 20 seconds later he pulls up next to me and says "sorry it was my fault!" like really? no **** ******* you almost ****ing killed me.

Can't hit you if he's dead.


Just sayin'

[Ascendent]

So about that car crew thread......................

[Ejjw18]

2006 GTO. waddup?


Last saturday i was on the highway and a civic pulled up next to me and started honking so i was like alright whatever we'll run. So we go from a 40mph roll, honk 3 times, and then gun. I separate myself from him very quickly, about 3 car lengths ahead and then out of no where all i hear is VREEHHHHHH VRROOOOOOMMMMMMM and he ****ing flys right past and gets like 10 car lengths ahead. I dont know what he had done to that car but it was ridiculous. My pride was not hurt.


About 15 minutes later an evo 9 pulls up nexts to me and starts honking. This was still on the highway. We go down to 40mph and gun it. Next thing i know i look down and i'm doing 150mph and im ahead of him so im like **** this and started slowing down. Ridiculous speed.

[Matheoperez]

Originally Posted by Ascendent

So about that car crew thread......................

Quick update on my build...

Crower Pro billet rods, JE 8.5 Slugs, and ARP head studs are en route along with EVERYTHING else needed (pumps,gaskets etc..) are now ordered and on the way! Trying to source all my head **** I need. Looking to get some retarded top end cams, retainers, dual springs, 1mm oversized valves, and get my head ported. 700hp here I come...

[garsome]

I figured I would post this here even though it's my Dads and not mine. He just picked it up Thursday from an auction. 2004 Cobra


(Charcoal Suede seat not gray)



I just did a quick wash on the car since it was filthy. We're having it detailed later this week since someone wheeled the car and left swirl marks everywhere. He's getting the front and back bumpers painted too and today we just ordered some Nitto 555R (285's) .
We're still figuring out all the mods since it didn't come with a list.

From what I can tell it has
SLP loudmouths,
SLP off road x-pipe
SLP longtube headers
Maximunm motorsports Caster camber plates
After market shock and struts (forgot brand maybe Maximum motorsports)
Fluidyne Intercooler
A smaller pulley that reads 2.95
Under drive pulleys
Short shifter ( I think a hurst)
BBK cold air intake
An IRS support brace
and then all the other basic bolt-ons ranging from throttle bodies to fuel injectors.

We think the Eaton(blower) is ported too. My Dad works for a dealership so all the mechanics looked over it and they think it's ported as well.


I'll try and get a vid soon of the exhaust since it's loud as hell!!!!!!!!!!!!!!

[kingLBJ]

yo Ascendent, what year is your civic? I hate most civics but urs is perfect

[05impalaSS]

Originally Posted by garsome

I figured I would post this here even though it's my Dads and not mine. He just picked it up Thursday from an auction. 2004 Cobra


(Charcoal Suede seat not gray)



I just did a quick wash on the car since it was filthy. We're having it detailed later this week since someone wheeled the car and left swirl marks everywhere. He's getting the front and back bumpers painted too and today we just ordered some Nitto 555R (285's) .
We're still figuring out all the mods since it didn't come with a list.

From what I can tell it has
SLP loudmouths,
SLP off road x-pipe
SLP longtube headers
Maximunm motorsports Caster camber plates
After market shock and struts (forgot brand maybe Maximum motorsports)
Fluidyne Intercooler
A smaller pulley that reads 2.95
Under drive pulleys
Short shifter ( I think a hurst)
BBK cold air intake
An IRS support brace
and then all the other basic bolt-ons ranging from throttle bodies to fuel injectors.

We think the Eaton(blower) is ported too. My Dad works for a dealership so all the mechanics looked over it and they think it's ported as well.


I'll try and get a vid soon of the exhaust since it's loud as hell!!!!!!!!!!!!!!

Thats awesome, I love me some Terminators...They are mod happy machines.. easy 11s with those mods and of course the "driver mod".

[juju_BEAN]

nice cobra.

what kind of auction are you attending to find those cars for sale?

[garsome]

Originally Posted by 05impalaSS

Thats awesome, I love me some Terminators...They are mod happy machines.. easy 11s with those mods and of course the "driver mod".

Ya but if it goes under 11.5 we get kicked off the track for not having a rollbar..... Our goal is 11.4!

Originally Posted by juju_BEAN

nice cobra.

what kind of auction are you attending to find those cars for sale?

Dealer auctions he buys used cars for dealerships.

[1987GN]

oh hai i back from dat dere ban

[Matheoperez]

Originally Posted by 1987GN

oh hai i back from dat dere ban

LOL what the hell you get banned for?

[1987GN]

Originally Posted by Matheoperez

LOL what the hell you get banned for?

cant really talk about it...cause I'll get banned again.

just pissed off a mod, basically.

[Ascendent]

Originally Posted by Matheoperez

Quick update on my build...

Crower Pro billet rods, JE 8.5 Slugs, and ARP head studs are en route along with EVERYTHING else needed (pumps,gaskets etc..) are now ordered and on the way! Trying to source all my head **** I need. Looking to get some retarded top end cams, retainers, dual springs, 1mm oversized valves, and get my head ported. 700hp here I come...

**** yes.

Originally Posted by garsome

I figured I would post this here even though it's my Dads and not mine. He just picked it up Thursday from an auction. 2004 Cobra


(Charcoal Suede seat not gray)



I just did a quick wash on the car since it was filthy. We're having it detailed later this week since someone wheeled the car and left swirl marks everywhere. He's getting the front and back bumpers painted too and today we just ordered some Nitto 555R (285's) .
We're still figuring out all the mods since it didn't come with a list.

From what I can tell it has
SLP loudmouths,
SLP off road x-pipe
SLP longtube headers
Maximunm motorsports Caster camber plates
After market shock and struts (forgot brand maybe Maximum motorsports)
Fluidyne Intercooler
A smaller pulley that reads 2.95
Under drive pulleys
Short shifter ( I think a hurst)
BBK cold air intake
An IRS support brace
and then all the other basic bolt-ons ranging from throttle bodies to fuel injectors.

We think the Eaton(blower) is ported too. My Dad works for a dealership so all the mechanics looked over it and they think it's ported as well.


I'll try and get a vid soon of the exhaust since it's loud as hell!!!!!!!!!!!!!!

Vids, man. We need vids of this montrosity.

Originally Posted by kingLBJ

yo Ascendent, what year is your civic? I hate most civics but urs is perfect

It's a 2000.

Originally Posted by 1987GN

cant really talk about it...cause I'll get banned again.

just pissed off a mod, basically.

Eh, it happens.

[2SSCAMARO]

Sup brahs. I have a 2010 2SS camaro checking in.